Fellowes 8041701 Professional Series Dual Monitor Stand

1. Úvod

Thank you for choosing the Fellowes 8041701 Professional Series Dual Monitor Stand. This product is designed to enhance your workspace ergonomics by elevating two monitors to a comfortable viewing height, reducing neck strain and shoulder tension. Its adjustable features allow for optimal positioning, and it helps clear valuable desk space.

This manual provides detailed instructions for the safe and correct assembly, operation, and maintenance of your monitor stand. Please read it thoroughly before installation and retain it for future reference.

2. Bezpečnostní informace

• Nosnost: Do not exceed the maximum weight capacity of 24 lbs per arm. Ensure your monitors are within this limit.
• Stabilita: Ensure the stand is securely mounted to a stable desk surface. Improper installation can lead to instability and potential damage or injury.
• Úpravy: Exercise caution when making adjustments to prevent monitors from shifting unexpectedly. Always support monitors during adjustments.
• Správa kabelů: Route cables safely to avoid pinching or snagging, which could damage cables or cause monitors to fall.
• Návrh 65 Varování: Tento produkt vás může vystavit chemikáliím, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.

3. Obsah balení

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact Fellowes customer support.

• Hlavní pól
• Ramena pro dva monitory (2 sekce na rameno)
• VESA Mounting Plates (2)
• Stůl Clamp Shromáždění
• Montážní hardware pro průchodky
• Klipy pro správu kabelů
• Sada hardwaru (šrouby, podložky, imbusové klíče)

Image: All components of the Fellowes 8041701 Professional Series Dual Monitor Stand laid out, including the main pole, dual articulating arms, and VESA mounting plates.

4. Pokyny k nastavení

The Fellowes 8041701 monitor stand offers two mounting options: desk clamp or grommet mount. Choose the method best suited for your desk.

4.1. Pracovní stůl Clamp Instalace

1. Připevněte psací stůl třamp assembly to the bottom of the main pole using the provided screws.
2. Umístěte třamp on the edge of your desk (1"-3" thick) and tighten the clamp screw until the pole is secure.

4.2. Instalace průchodkového držáku

1. Pokud má váš stůl otvor pro průchodku, odstraňte kryt průchodky.
2. Vložte hlavní tyč otvorem v průchodce.
3. From underneath the desk, secure the pole using the grommet mounting plate and tightening knob.

4.3. Připevnění ramen monitoru a monitorů

1. Slide the monitor arm sections onto the main pole at your desired height. Secure them with the locking collars.
2. Attach the VESA mounting plates to the back of your monitors using the appropriate screws from the hardware kit. Ensure the screws are tightened securely.
3. Carefully slide each monitor (with attached VESA plate) onto the end of its respective monitor arm. Ensure the monitor clicks into place or is secured with the locking mechanism.
4. Connect all necessary cables to your monitors and use the integrated cable management clips to route them neatly along the arms and pole.

Obrázek: Zadní část view of two monitors mounted on the stand, showing the desk clamp mechanism securing the stand to the desk edge and cables routed.

5. Návod k obsluze

The Fellowes 8041701 monitor stand offers extensive adjustability to customize your viewzkušenosti.

5.1. Nastavení výšky

To adjust the height of the monitors, loosen the locking collar on the main pole, slide the arm assembly up or down to the desired position (3.5 inches to 16.5 inches from the center of the mounting plate), and then re-tighten the collar securely.

5.2. Tilt and Swivel

Each monitor can be tilted up or down by +/- 37 degrees and swiveled left or right at the arm joints. Gently grasp the monitor edges and adjust to your preferred angle. If the monitor sags, tighten the three screws visible on the round pieces at the end of the arm (part J, as per some instruction sheets) to increase tension.

5.3. Rotace

Monitors can be rotated 360 degrees (portrait to landscape orientation) at the VESA mounting plate. Rotate the monitor gently until it locks into the desired orientation.

Image: A person's hand gently adjusting the position of a monitor mounted on the Fellowes dual monitor stand, demonstrating the ease of adjustment.

6. Údržba

• Čištění: Otřete stojan měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
• Mazání: Pohyblivé části nejsou potřeba mazání.

7. Řešení problémů

• Monitor se prohýbá nebo naklání dolů: This indicates insufficient tension. Locate the three screws on the round pieces at the end of the arm (near the VESA plate) and tighten them with the provided Allen wrench until the monitor holds its position.
• Stojan je nestabilní: Zajistěte stůl třamp or grommet mount is fully tightened. Verify that the desk surface is sturdy and capable of supporting the stand and monitors.
• Obtížnost nastavení výšky: Loosen the locking collar on the main pole sufficiently before attempting to slide the arm assembly.
• Monitory nejsou v rovině: Minor adjustments can be made by slightly loosening the VESA plate screws, leveling the monitor, and re-tightening. For larger discrepancies, check the arm placement on the main pole.

8. Specifikace

9. Záruka a podpora

Fellowes products are designed for durability and performance. For warranty information or technical support, please visit the official Fellowes webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Fellowes Contact Information:
Please refer to the contact details provided on the Fellowes official webNejnovější možnosti podpory naleznete na webu nebo na obalu produktu.