Držák ručníků Taymor Prisma řady 18 palců (model 02-D9218W) – návod k obsluze

1. Konec produktuview

The Taymor Prisma Series 18-inch Towel Bar, model 02-D9218W, is designed to provide a functional and stylish solution for hanging towels in your bathroom. This towel bar features a crisp white powder-coated finish and a traditional design, complementing various bathroom decors. Constructed from durable Zamac (diecast zinc alloy), it ensures longevity and reliable performance. The unit measures 19 7/8 inches wide with a 3 1/8-inch extension from the mounting surface.

Klíčové vlastnosti:

• Rozměry: 19-7/8 inches wide x 3-1/8 inches extension from the wall.
• Dokončit: Crisp white powder-coated finish for a clean, subtle look.
• Montáž: Concealed surface mount for a seamless appearance.
• Design: Traditional style that coordinates with the entire Prisma series.
• Materiál: Constructed from durable Zamac (diecast zinc alloy).

2. Obsah balení

Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny.

• Taymor Prisma Series 18-Inch Towel Bar (1 unit)
• Montážní materiál (šrouby, kotvy atd.)

3. Bezpečnostní informace

Read all instructions carefully before installation. Failure to follow these instructions may result in injury or damage to the product or mounting surface.

• Always wear appropriate safety gear, such as safety glasses, during installation.
• Ensure the mounting surface is structurally sound and can support the weight of the towel bar and any items placed on it.
• Use the correct tools for drilling and fastening to prevent damage.
• Keep small parts and hardware out of reach of children.
• Do not overtighten screws, as this may strip threads or damage the product.

4. Nastavení a instalace

Follow these steps for proper installation of your Taymor Prisma Series Towel Bar.

Požadované nástroje (nejsou součástí dodávky):

• Tužka
• Měřicí páska
• Vrtat
• Drill Bits (appropriate for wall anchors)
• Šroubovák (doporučuje se křížový šroubovák)
• Úroveň

Kroky instalace:

1. Určete místo montáže: Choose a suitable location on your wall for the towel bar. Ensure there are no electrical wires or plumbing pipes behind the drilling area.
2. Označte vrtné body: The drilled holes for this towel bar are 17 7/8 inches center to center. Use a measuring tape and a level to mark two points on the wall that are 17 7/8 inches apart horizontally and at the desired height.
3. Vrtací pilotní otvory: Using a drill bit appropriate for your wall type and the provided wall anchors, drill pilot holes at the marked points.
4. Vložte nástěnné kotvy: Jemně zatloukejte hmoždinky do vodicích otvorů, dokud nebudou v jedné rovině s povrchem zdi.
5. Připevněte montážní konzoly: Secure the mounting brackets (if separate from the towel bar base) to the wall using the provided screws, fastening them into the wall anchors.
6. Mount Towel Bar: Align the towel bar with the attached mounting brackets. Secure the towel bar to the brackets using the remaining screws, ensuring a snug and stable fit. The mounting is concealed for a clean look.
7. Ověřte stabilitu: Gently tug on the installed towel bar to ensure it is securely fastened to the wall.

Image: The Taymor Prisma Series 18-Inch Towel Bar, model 02-D9218W, shown in its white finish. This image illustrates the product's design and appearance when installed.

5. Používání

The Taymor Prisma Series Towel Bar is designed for hanging towels and other lightweight bathroom textiles. Ensure that the total weight placed on the towel bar does not exceed its structural capacity to prevent damage or detachment from the wall.

6. Údržba

To maintain the appearance and longevity of your Taymor Prisma Series Towel Bar, follow these simple cleaning guidelines:

• Čištění: Wipe the towel bar regularly with a soft, damp tkanina.
• Vyhněte se drsným čisticím prostředkům: Do not use abrasive cleaners, scouring pads, or chemical solvents, as these can damage the white powder-coated finish.
• Sušení: Povrch ihned po čištění osušte, abyste zabránili vzniku skvrn od vody.

7. Řešení problémů

If you encounter any issues with your towel bar, refer to the following common solutions:

• Towel Bar Feels Loose: If the towel bar becomes loose over time, gently tighten the mounting screws. Do not overtighten. If the wall anchors are damaged, they may need to be replaced or the towel bar repositioned.
• Scratches or Finish Damage: Minor scratches may be touched up with a compatible white enamel paint. For significant damage, consider contacting Taymor customer support for advice.

8. Specifikace

9. Informace o záruce

Taymor Industries warrants goods against defects in manufacture for one year from the date of purchase. This warranty does not cover user-caused damage or damage incurred during installation. The warranty is void if the goods have been subjected to misapplication or abuse.

10. Zákaznická podpora

For further assistance, technical support, or warranty claims, please contact Taymor Industries directly. Refer to the official Taymor webaktuální kontaktní informace naleznete na webu nebo na obalu produktu.