COAST HP7 730 Lumen Focusing LED Flashlight Instruction Manual

Zavedení

The COAST HP7 Flashlight is a high-performance LED light designed for various applications. It features the Pure Beam Focusing System with Slide Focus and Beam Lock technologies, offering versatile illumination with high, medium, and low output modes. This manual provides essential information for the proper setup, operation, and maintenance of your HP7 flashlight.

Image: The COAST HP7 730 Lumen Focusing LED Flashlight, showcasinjeho kompaktní a odolný design.

Nastavení

Instalace baterie

The HP7 flashlight requires 4 AAA batteries (included). Follow these steps to install or replace the batteries:

1. Unscrew the tailcap of the flashlight by turning it counter-clockwise.
2. Insert the 4 AAA batteries into the battery cartridge, ensuring correct polarity (+/-) as indicated.
3. Place the loaded battery cartridge into the flashlight body.
4. Screw the tailcap back on by turning it clockwise until it is securely tightened.

Návod k obsluze

Zapnutí/vypnutí a režimy osvětlení

The HP7 features a Quick-Cycle™ Switch System for easy operation:

• Press the tailcap button once to turn the flashlight ON in High mode.
• Press the button again (within a short interval) to cycle to Low mode.
• Press the button a third time to turn the flashlight OFF.
• If the flashlight is left ON for more than 2 seconds in any mode, the next press will turn it OFF.

Pure Beam Focusing System with Slide Focus and Beam Lock

The patented Pure Beam Focusing Optic allows you to transition between a wide flood beam and a focused spot beam.

• Zaměření snímku: To adjust the beam, simply push or pull the head of the flashlight with your thumb. Pushing forward creates a focused Bulls-Eye Spot Beam, while pulling back creates an Ultra View Flood Beam.
• Beam Lock: Once you have achieved your desired beam focus, you can lock it in place by rotating the head of the flashlight. This prevents accidental changes to the beam pattern during use.

Images: Diagrams illustrating the Slide Focus Lens, Wide Angle Flood beam pattern, and Bulls-Eye Spot beam pattern.

Images: The HP7 flashlight in action, demonstrating its powerful illumination capabilities in different scenarios.

Údržba

Obecná péče

• Keep the flashlight clean and free from dirt and debris. Wipe with a soft, damp hadříkem podle potřeby.
• Regularly inspect the O-rings for wear and tear to maintain water resistance. Replace if damaged.
• Pokud svítilnu nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení.

Trvanlivost

The COAST HP7 Flashlight is designed to be impact resistant and weather resistant (IPX4 rated), making it suitable for various environments. Its LED is virtually unbreakable under normal use conditions.

Odstraňování problémů

If your HP7 flashlight is not functioning as expected, consider the following:

• Žádné světlo: Check if the batteries are installed correctly with the proper polarity. Ensure the tailcap is fully tightened. Replace old batteries with new ones.
• Slabé světlo: Baterie mohou být vybité. Vyměňte je za nové.
• Nekonzistentní provoz: Ensure all connections are clean and free of corrosion. Clean battery contacts if necessary.

If issues persist, please refer to the warranty information for support options.

Specifikace

Obrázek: Overview of COAST HP7 Flashlight features and key specifications.

Záruka a podpora

The COAST HP7 Flashlight is backed by Coast's lifetime guarantee against defects in materials and workmanship. For warranty claims or technical support, please contact Coast customer service directly. Keep your purchase receipt as proof of purchase.