1. Úvod
The Monacor SPH-5M is a high-quality Hi-Fi bass-midrange speaker designed for exceptional audio reproduction. It features a robust construction and advanced acoustic properties, making it suitable for various speaker system designs.
Klíčové vlastnosti:
- High-quality bass-midrange speaker designed for long excursion.
- Damped, low-resonance polypropylene cone for clear sound.
- Robust die-cast aluminum basket with an attractive design and 6-hole screw connection.
- Magnetic system with a drilled pole core and extended rear plate for optimized performance.
- Versatile for compact bass-reflex, TML, and closed speaker systems.
- Also suitable as a midrange speaker in 3-way speaker systems.

2. Nastavení a instalace
Proper installation is crucial for optimal performance and longevity of your SPH-5M speaker. Follow these guidelines:
- Design krytu: The SPH-5M is designed for compact bass-reflex, TML (Transmission Line), and closed speaker enclosures. Ensure your enclosure design is appropriate for the speaker's parameters to achieve desired acoustic results.
- Montáž: Secure the speaker firmly into the enclosure using the 6-hole screw connection points on the robust die-cast aluminum basket. Use appropriate screws that do not overtighten or damage the basket.
- Zapojení: Connect the speaker terminals to your amplifier or crossover network. Ensure correct polarity (+ to + and - to -) to avoid phase issues that can degrade sound quality. The speaker has an impedance of 8 Ohms.
- AmpPárování záchranáře: Použijte an amplifier capable of delivering sufficient power (up to 40 WRMS continuous, 80 WMAX peak) into an 8 Ohm load. Avoid underpowering or overpowering the speaker, as both can lead to damage.
3. Provoz
To ensure the best performance and extend the life of your Monacor SPH-5M speaker, observe the following operational guidelines:
- Počáteční záběh: Allow a break-in period of several hours of moderate listening before operating the speaker at high volumes. This allows the cone and surround materials to loosen and perform optimally.
- Úrovně hlasitosti: Operate the speaker within its specified power handling limits (40 WRMS / 80 WMAX). Avoid prolonged listening at excessively high volumes that cause audible distortion, as this can damage the voice coil.
- Nastavení přechodu: If using a crossover, ensure it is correctly configured for the SPH-5M's frequency response characteristics to prevent sending inappropriate frequencies to the driver.
4. Údržba
The Monacor SPH-5M speaker requires minimal maintenance to ensure long-term performance:
- Čištění: Gently wipe the cone and frame with a soft, dry cloth to remove dust. Avoid using harsh chemicals or excessive moisture.
- Podmínky prostředí: Keep the speaker in a stable environment, away from direct sunlight, extreme temperatures, and high humidity.
- Inspekce: Periodically inspect the cone, surround, and dust cap for any signs of damage or wear.
5. Řešení problémů
If you encounter issues with your SPH-5M speaker, consider the following common troubleshooting steps:
- Žádný zvuk:
- Zkontrolujte všechna zapojení od amplifier to the speaker for secure contact and correct polarity.
- Ověřte, že amplifier je zapnutý a funguje správně.
- Ensure the audio source is active and sending a signal.
- Zkreslený zvuk:
- Reduce the volume level; distortion often occurs when the ampZvučník nebo reproduktor je přebuzen.
- Zkontrolujte, zda nejsou uvolněné spoje nebo poškozené kabely reproduktorů.
- Zkontrolujte membránu a obvod reproduktoru, zda nejsou fyzicky poškozené.
- Zajistěte amplifier is not clipping (producing a distorted waveform).
- Weak Bass or Midrange:
- Confirm correct speaker polarity; reversed polarity can cause bass cancellation.
- Check crossover settings to ensure appropriate frequencies are being sent to the speaker.
- Verify the enclosure is sealed properly (for closed designs) or that ports are unobstructed (for bass-reflex designs).
If problems persist after performing these checks, contact a qualified audio technician or Monacor customer support for further assistance.
6. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Monacor |
| Číslo modelu | 10.5530 |
| Manipulace s energií (RMS) | 40 wattů |
| Zvládání výkonu (max.) | 80 wattů |
| Impedance | 8 Ohmy |
| Technologie připojení | Pomocné (kabelové) |
| Typ montáže | Table Mount (typically within an enclosure) |
| Typ reproduktoru | Woofer / Bass-Midrange |
| Doporučená použití | For television (as part of a home audio system) |
| Rozměry produktu (D x Š x V) | 13 x 16 x 28 cm |
| Hmotnost produktu | 190.51 gramů |
| Vodotěsný | True (referring to cone material resistance) |
| Zdroj napájení | Electric Cable (via ampživější) |
7. Záruka a podpora
For warranty information, technical support, or service inquiries regarding your Monacor SPH-5M speaker, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official Monacor webstránky s kontaktními údaji a dalšími zdroji.





