FABER DCH23 SS19A HIP 90 cm Cooker Hood Instruction Manual

1. Úvod

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FABER DCH23 SS19A HIP 90 cm built-in cooker hood. Please read these instructions carefully before using the appliance and keep them for future reference.

Image: FABER DCH23 SS19A HIP Cooker Hood installed in a modern kitchen setting.

2. Bezpečnostní informace

Při používání elektrických spotřebičů vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob. Tento spotřebič je určen pouze pro domácí použití.

• Ujistěte se, že elektrická instalace splňuje místní předpisy.
• Nedovolte dětem obsluhovat spotřebič.
• Regularly clean the filters to prevent grease buildup, which can be a fire hazard.
• Neflambujte pod odsavačem par.
• Zajistěte dostatečné větrání místnosti, pokud je odsavač par používán současně s plynovými nebo jinými spotřebiči na palivo.
• Před jakýmkoli čištěním nebo údržbou odpojte spotřebič od napájení.

3. Konec produktuview

The FABER DCH23 SS19A HIP is a 90 cm built-in under-cabinet cooker hood designed for efficient air purification in your kitchen. It features LED lighting and offers versatile installation options.

Klíčové vlastnosti:

• Design and Performance: 90 cm under-cabinet hood, suitable for small to medium-sized kitchens. Maximum noise level of 69 dB. Equipped with 3W LED lighting for clear cooking area visibility.
• Dual Installation Modes: Can be installed in either Režim extrakce (expelling cooking fumes outside) or Režim filtrování (recirculating purified air using active carbon filters).
• Filtrační systém: Includes a metal anti-grease filter, dishwasher-safe for easy cleaning. Optional active carbon filters (not included) are required for filtering mode and should be replaced approximately every 3 months.
• Energetická účinnost: Rated Class D for energy efficiency with minimal LED power consumption. Suction power adjustable to three levels, up to 570 m³/h.

Komponenty:

• Jednotka odsavače par
• Metal Anti-Grease Filters
• LED osvětlení
• Ovládací tlačítka
• Installation Hardware (screws, wall plugs, mounting brackets)
• Ducting (for extraction mode, not included)
• Active Carbon Filters (for filtering mode, not included)

4. Specifikace

Diagram rozměrů produktu:

Image: Technical drawing illustrating the dimensions of the cooker hood, including width (598-898mm), depth (415mm), and height (430-760mm).

5. Instalace

The FABER DCH23 SS19A HIP cooker hood can be installed in two configurations: external extraction or internal recirculation. Ensure the installation surface is strong enough to support the appliance.

5.1. Installation Modes

Diagram: External Extraction Mode. Air is drawn up and expelled outside through a duct.

Diagram: Internal Recirculation Mode. Air is filtered and returned to the kitchen.

5.2. Obecné kroky instalace:

1. Příprava: Unpack the cooker hood and check for any damage. Gather all necessary tools and components.
2. Označení: Use a level and pencil to mark the drilling points on the wall according to the provided template or dimensions diagram.
3. Vrtání: Drill holes at the marked points and insert wall plugs.
4. Montážní konzoly: Připevněte montážní konzoly ke zdi pomocí šroubů.
5. Ducting (Extraction Mode): Connect the exhaust duct to the hood's outlet and route it to the exterior. Ensure the duct is as short and straight as possible for optimal performance.
6. Carbon Filters (Recirculation Mode): Install active carbon filters (if not already present) according to the maintenance section.
7. Montáž kapoty: Carefully lift the hood and attach it to the wall brackets. Ensure it is securely fastened and level.
8. Elektrické připojení: Connect the power cable to a suitable electrical outlet, ensuring it complies with local electrical safety standards.
9. Testování: Turn on the hood to test all functions (fan speeds, lights).

Installation Video (Example - CIARRA Hood):

Video: Installation guide for a CIARRA 90cm wall-mounted cooker hood. While not the exact FABER model, it provides general visual guidance for similar cooker hood installation steps.

6. Návod k obsluze

Your FABER cooker hood is equipped with user-friendly controls for fan speed and lighting.

6.1. Ovládací panel:

The control panel features push buttons for various functions:

• Vypínač: Zapíná/vypíná digestoř.
• Tlačítka rychlosti ventilátoru (1, 2, 3): Adjusts the suction power to low, medium, or high settings.
• Světelné tlačítko: Zapíná/vypíná LED osvětlení.

6.2. Tipy pro použití:

• Turn on the hood a few minutes before you start cooking to create an airflow.
• Use the appropriate fan speed for the intensity of cooking fumes.
• Allow the hood to run for a few minutes after cooking to clear any remaining odors.

Operation Video (Example - CIARRA Hood):

Video: Demonstration of a CIARRA 90cm cooker hood in operation, showing fan speeds and lighting. Provides general visual guidance for similar cooker hood functions.

7. Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho odsavače par.

7.1. Cleaning the Anti-Grease Filters:

The metal anti-grease filters capture grease particles from cooking fumes. They should be cleaned regularly (approximately once a month, depending on usage) to maintain efficiency.

1. Switch off the cooker hood and disconnect it from the power supply.
2. Remove the anti-grease filters by pulling the release latch.
3. Wash the filters by hand with hot water and a mild detergent, or in a dishwasher on a low-temperature cycle.
4. Před opětovnou instalací filtrů se ujistěte, že jsou zcela suché.
5. Re-install the filters into the hood.

Image: Metal anti-grease filters.

7.2. Replacing Active Carbon Filters (Filtering Mode Only):

If your hood is used in filtering mode, active carbon filters are essential for removing odors. These filters cannot be washed and must be replaced approximately every 3 months.

1. Switch off the cooker hood and disconnect it from the power supply.
2. Remove the metal anti-grease filters as described above.
3. Remove the old active carbon filters (refer to your specific model's instructions for attachment method).
4. Install new original active carbon filters.
5. Re-install the metal anti-grease filters.

Image: Active carbon filters.

7.3. Obecné čištění:

Clean the exterior surfaces of the hood regularly with a soft cloth and a non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials that could damage the finish.

8. Řešení problémů

If you encounter problems with your cooker hood, consult the following table before contacting technical support.

9. Záruka a podpora

For warranty information, please refer to the documentation provided with your purchase. For technical assistance or inquiries, please contact FABER customer support:

• E-mail: david.caracini@faberspa.com
• Telefon: (+39) 0732691282

Additional product information, including energy efficiency details, can be found on the EPREL database:

Informace o produktu EPREL (odkaz na QR kód)