1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of the ASUS P5G41T-M LX3 microATX motherboard. It is designed to assist users in setting up their system correctly and efficiently.
2. Nastavení a instalace
2.1 Vybalení a obsah balení
Carefully unpack the motherboard and check the contents against the list below. If any item is damaged or missing, contact your retailer.
Figure 2.1: ASUS P5G41T-M LX3 Motherboard and included accessories.
- Základní deska ASUS P5G41T-M LX3
- I / O štít
- Datové kabely SATA
- Uživatelská příručka
- Podpůrné DVD (ovladače a nástroje)
2.2 Rozložení základní desky
Před instalací se seznamte s různými komponenty a konektory na základní desce.
Obrázek 2.2: Přesview of the ASUS P5G41T-M LX3 Motherboard components.
2.3 Instalace CPU
The motherboard supports Intel LGA775 processors. Ensure the CPU socket lever is open before gently placing the CPU, aligning the golden triangle on the CPU with the mark on the socket. Close the lever to secure the CPU.
2.4 Instalace paměti (RAM)
This motherboard supports DDR3 1066MHz memory modules. Insert the memory modules into the DIMM slots, ensuring the notches on the module align with the keys in the slot. Press down firmly until the clips on both ends snap into place.
2.5 Instalace rozšiřující karty
Install PCI Express (PCIe) or PCI expansion cards into the appropriate slots. Secure the cards with screws to the chassis.
2.6 Připojení úložného zařízení
Connect SATA storage devices (hard drives, SSDs, optical drives) to the SATA ports on the motherboard using the provided SATA cables.
2.7 Konektory na předním panelu
Connect the chassis front panel cables (power button, reset button, HDD LED, power LED, USB ports, audio jacks) to the corresponding headers on the motherboard. Refer to the motherboard layout for exact locations.
2.8 Připojení napájení
Connect the 24-pin ATX power connector and the 4-pin ATX 12V power connector from your power supply unit (PSU) to the respective ports on the motherboard.
2.9 Mounting the Motherboard
Carefully place the motherboard into your computer chassis, aligning the screw holes. Secure the motherboard with screws, ensuring it is properly seated on the standoffs.
3. Návod k obsluze
3.1 První spuštění a nastavení BIOSu
After completing hardware installation, connect your monitor, keyboard, and mouse. Power on the system. During startup, press the 'Delete' key (or as indicated on screen) to enter the BIOS setup utility. Here you can configure boot order, system time, and other essential settings.
3.2 Instalace ovladače
Once the operating system is installed, install the necessary drivers from the included support DVD or download the latest versions from the ASUS official webwebu. To zahrnuje ovladače čipové sady, ovladače zvuku, ovladače LAN a veškeré další ovladače periferních zařízení.
Figure 3.1: Rear I/O panel of the ASUS P5G41T-M LX3 Motherboard.
4. Údržba
4.1 Čištění
Regularly clean dust from the motherboard and components using compressed air. Ensure the system is powered off and unplugged before cleaning. Avoid using liquid cleaners directly on components.
4.2 Aktualizace systému BIOS
Pravidelně kontrolujte podporu ASUS website for BIOS updates. BIOS updates can improve system stability, compatibility, and performance. Follow the instructions provided by ASUS carefully when performing a BIOS update.
5. Řešení problémů
5.1 Běžné problémy
- Bez napájení: Check all power connections (24-pin ATX, 4-pin ATX 12V), ensure the PSU is switched on, and verify the front panel power button connection.
- Bez displeje: Ensure the monitor is connected and powered on. Check the graphics card (if applicable) and its power connection. Reseat RAM modules.
- Systém se nepodaří spustit: Check CPU and RAM installation. Listen for beep codes from the motherboard speaker, which can indicate specific hardware issues.
5.2 Beep Codes
Refer to the motherboard's specific beep code definitions in the full user manual for detailed diagnostics. Common codes include:
- One short beep: System boots successfully.
- Continuous beeps: Memory or power issue.
- Long beep, then two short beeps: Graphics card error.
Obrázek 5.1: Detailní view of the rear I/O ports for troubleshooting connectivity.
6. Specifikace
| Funkce | Specifikace |
|---|---|
| Zásuvka CPU | LGA 775 |
| Čipová sada | Intel G41 / ICH7 |
| Paměť | 2 x DDR3 DIMM, Max. 8GB, DDR3 1333(O.C.)/1066/800 MHz Non-ECC, Un-buffered Memory |
| Rozšiřující sloty | 1 x PCIe x16, 2 x PCI |
| Skladování | 4 x SATA 3Gb/s porty |
| USB porty | 8 x USB 2.0 ports (4 at mid-board, 4 at back panel) |
| Zvuk | VIA VT1708S 8-Channel High Definition Audio CODEC |
| LAN | Realtek RTL8111E Gigabit LAN controller |
| Form Factor | microATX (9.6 inch x 7.9 inch) |
7. Záruka a podpora
Informace o záruce a technickou podporu naleznete v dokumentaci dodané s vaším produktem nebo navštivte oficiální stránky podpory ASUS. webstránky. The webStránka nabízí ovladače, často kladené otázky a kontaktní informace pro zákaznický servis.
Podpora ASUS Webmísto: www.asus.com/support/
