Zavedení
Thank you for choosing the WOODCRAFT Woodshop Clock with integrated Thermometer and Hygrometer. This versatile instrument is designed to provide accurate timekeeping along with essential environmental readings for your workspace. Its robust design and clear display make it an ideal addition to any woodshop or similar environment.
Mezi klíčové vlastnosti patří:
- 10-inch diameter clock face with chrome hands for easy readability.
- Integrated thermometer displaying temperature in 5-degree Fahrenheit increments.
- Integrated hygrometer displaying relative humidity in 2% intervals.
- Durable construction suitable for various environments.
Obrázek 1: Přední strana view of the Woodshop Clock, displaying the time, temperature, and humidity.
Nastavení
1. Instalace baterie
The Woodshop Clock requires one (1) AA battery (not included) for its quartz movement. To install the battery:
- Najděte přihrádku na baterie na zadní straně hodin.
- Otevřete kryt bateriového prostoru.
- Vložte jednu baterii typu AA a ujistěte se, že kladný (+) a záporný (-) pól správně odpovídají označením uvnitř přihrádky.
- Bezpečně zavřete kryt bateriového prostoru.
2. Nastavení času
After installing the battery, set the time:
- Najděte knoflík pro nastavení času na zadní straně hodinového mechanismu.
- Gently rotate the knob clockwise or counter-clockwise until the clock hands display the correct time.
3. Umístění
For optimal performance and accurate readings from the thermometer and hygrometer, consider the following placement guidelines:
- Place the clock in a location that is representative of the general temperature and humidity of your woodshop or desired area.
- Avoid direct sunlight, heat sources (e.g., heaters, vents), or areas with extreme drafts, as these can affect the accuracy of the temperature and humidity readings.
- Ensure the clock is mounted securely on a wall or placed on a stable surface.
Figure 2: Dimensions of the Woodshop Clock, showing its 10-inch diameter.
Operace
Reading the Clock
The main dial displays the current time with clear hour, minute, and second hands. The large 10-inch black face with chrome hands and markings ensures easy readability from a distance.
Reading the Thermometer
The thermometer dial is located on the lower left side of the clock face. It displays the ambient temperature in Fahrenheit, with markings in 5-degree increments. The red needle indicates the current temperature.
Reading the Hygrometer
The hygrometer dial is located on the lower right side of the clock face. It displays the relative humidity as a percentage, with markings in 2% intervals. The red needle indicates the current relative humidity.
Obrázek 3: Detail view of the thermometer and hygrometer for precise readings.
Údržba
Výměna baterie
When the clock hands begin to slow down or stop, it is an indication that the AA battery needs to be replaced. Follow the battery installation steps outlined in the "Setup" section.
Čištění
To clean the clock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or spray directly onto the clock face or mechanism, as this may damage the finish or internal components.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Clock not keeping accurate time or stopped. | Slabá nebo vybitá baterie. | Replace the AA battery with a fresh one. Ensure correct polarity. |
| Clock not keeping accurate time or stopped. | Problém s mechanismem. | Ensure the time-setting knob is not stuck or damaged. If the issue persists after battery replacement, contact customer support. |
| Inaccurate thermometer or hygrometer readings. | Improper placement (e.g., direct sunlight, near heat source, strong drafts). | Relocate the clock to a more stable environment, away from direct heat, cold, or drafts. Allow time for the readings to stabilize in the new location. |
| Inaccurate thermometer or hygrometer readings. | Sensor obstruction or damage. | Ensure nothing is blocking the sensor areas on the back or sides of the clock. If damage is visible, contact customer support. |
Specifikace
- Rozměry produktu: 9.9 x 9.9 x 2.1 palce
- Hmotnost položky: 1.37 libry
- Číslo modelu: 146137W
- Zdroj napájení: 1 x AA baterie (není součástí balení)
- Zobrazení teploty: Fahrenheit, 5-degree increments
- Displej vlhkosti: Relative Humidity (%), 2% intervals
- Výrobce: Woodcraft Supply
Záruka
WOODCRAFT products are manufactured to high-quality standards. For specific warranty information regarding your Woodshop Clock, please refer to the packaging or contact WOODCRAFT customer support directly. Keep your purchase receipt as proof of purchase.
Zákaznická podpora
If you have any questions, require assistance, or encounter issues not covered in this manual, please contact WOODCRAFT customer support:
- Webmísto: www.woodcraft.com (Please note: This is a general example, actual support contact details may vary. Refer to product packaging for official contact information.)
- Telefon: Refer to the WOODCRAFT webaktuální kontaktní čísla naleznete na webu nebo na obalu produktu.
When contacting support, please have your product model number (146137W) and purchase details ready.
