Hosa SKT-415Q

Hosa SKT-415Q Pro Speaker Cable User Manual

Model: SKT-415Q

Konec produktuview

The Hosa SKT-415Q Pro Speaker Cable is engineered for reliable audio signal transmission between loudspeakers and amplifiers. Featuring REAN Loudspeaker (Speakon-compatible) and 1/4 inch TS connectors, this 15-foot (4.5m) cable is built with high-quality components to ensure dependable service and exceptional value in professional audio environments.

Hosa SKT-415Q Pro Speaker Cable showing the full length of the cable with both connectors visible.

Figure 1: The Hosa SKT-415Q Pro Speaker Cable, illustrating its overall length and the distinct Speakon-compatible and 1/4 inch TS connectors.

Co je v krabici

Your Hosa SKT-415Q Pro Speaker Cable package includes:

Pokyny pro nastavení

Follow these steps to properly connect your Hosa SKT-415Q Pro Speaker Cable:

  1. Identifikujte konektory: Locate the REAN Loudspeaker (Speakon-compatible) connector and the 1/4 inch TS (Tip-Sleeve) connector on the cable. The Speakon-compatible connector is typically larger and features a locking mechanism, while the 1/4 inch TS connector is a standard audio jack.
  2. Connect to Loudspeaker: Insert the REAN Loudspeaker (Speakon-compatible) connector into the corresponding Speakon input on your loudspeaker. Twist the connector clockwise until it locks securely into place. Ensure a firm connection to prevent signal loss.
  3. Připojte se k AmpMixér/Pecka: Insert the 1/4 inch TS connector into the speaker output jack of your amplifier, power mixer, or audio interface. Ensure it is fully inserted for proper contact.
  4. Secure Cable Run: Route the cable safely, avoiding tripping hazards and areas where it might be pinched or excessively bent. Use cable ties or wraps if necessary to keep the setup tidy and secure.
  5. Zapnutí: Once all connections are secure, you may power on your audio equipment.
Detailní záběr view of the REAN Loudspeaker (Speakon-compatible) and 1/4 inch TS connectors of the Hosa speaker cable.

Obrázek 2: Detailní view of the Speakon-compatible and 1/4 inch TS connectors, highlighting their design for secure and reliable audio connections.

Návod k obsluze

The Hosa SKT-415Q Pro Speaker Cable is designed for straightforward operation. Once properly connected as described in the "Setup Instructions" section, the cable facilitates the transmission of audio signals from your amplifier or power mixer to your loudspeaker.

Údržba

Proper maintenance extends the life and performance of your Hosa SKT-415Q Pro Speaker Cable:

Odstraňování problémů

If you experience issues with your Hosa SKT-415Q Pro Speaker Cable, consider the following troubleshooting steps:

ProblémMožná příčinaŘešení
Z reproduktoru se nezobrazuje žádný zvuk
  • Kabel není zcela připojen
  • Byl vybrán nesprávný vstup/výstup
  • Vadný amplifier or loudspeaker
  • Poškozený kabel
  • Ensure both Speakon-compatible and 1/4 inch TS connectors are securely seated.
  • Verify that the correct speaker output on the amplifier and input on the loudspeaker are used.
  • Otestujte amplifier and loudspeaker with a known working cable.
  • Inspect the cable for visible damage; try a different cable if available.
Intermittent sound or crackling
  • Uvolněné spojení
  • Zkorodované konektory
  • Internal cable damage
  • Reseat both connectors firmly.
  • Clean connectors with a contact cleaner if corrosion is visible.
  • Replace the cable if the issue persists after checking connections and cleaning.
Hučení nebo bzučení
  • Problém se zemní smyčkou
  • Rušení od jiné elektroniky
  • Ensure all audio equipment is plugged into the same power outlet or power conditioner.
  • Keep speaker cables away from power cables and other sources of electromagnetic interference.

Specifikace

FunkceDetail
Název produktuHosa SKT-415Q Pro Speaker Cable
Číslo modeluSKT-415Q
ZnačkaHosa
KonektoryREAN Loudspeaker (Speakon-compatible) to 1/4 inch TS
Délka kabelu15 stop (4.5 metrů)
Měřidlo14 AWG (American Wire Gauge)
BarvaČerný
Rozměry produktu1 x 1 x 1 cm (přibližné rozměry balení)
Hmotnost položky1.4 libry
VýrobceHosa

Záruka a podpora

Hosa Technology products are designed for durability and performance. For specific warranty information, please refer to the warranty card included with your purchase or visit the official Hosa Technology website. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact Hosa customer service directly.

Oficiální technologický pracovník Hosa Webmísto: https://hosatech.com/

Související dokumenty - SKT-415Q

Předview Hosa Sidekick DIB-445 48V Phantom Powered Active DI Box
The Hosa Sidekick DIB-445 is a 48V phantom powered active DI box that converts unbalanced instrument signals to balanced line-level signals for DAWs and mixing consoles. It features an on-board transformer, multiple outputs, a pad switch, ground lift, and polarity flip, designed for instruments like guitars with passive pickups.
Předview Instalace a uživatelská příručka dvířek pro domácí mazlíčky VEVOR pro modely SKT
Oficiální instalační a uživatelská příručka pro dvířka pro domácí mazlíčky VEVOR, modely SKT-01 až SKT-06. Obsahuje specifikace produktu, seznam dílů, podrobné pokyny k instalaci a tipy pro výcvik domácích mazlíčků.
Předview Instalace a uživatelská příručka dvířek pro domácí mazlíčky VEVOR
Komplexní průvodce pro modely dvířek pro domácí mazlíčky VEVOR SKT-01 až SKT-06, který zahrnuje instalaci, specifikace, seznamy dílů a tipy pro výcvik domácích mazlíčků s posuvnými okny.
Předview Manuál dílů pro podstránku z roku 2026 pro systémy inspekce inženýrských sítí
Comprehensive parts manual for Subsite's 2026 series of utility inspection systems, detailing components for cameras, reels, transports, controllers, and accessories. Includes part numbers and identification assistance.
Předview HYUNDAI-KIA SKT 100/200 CNC Turning Center Installation and Maintenance Manual
Comprehensive installation and maintenance manual for the HYUNDAI-KIA SKT 100 and SKT 200 CNC Turning Centers, detailing specifications, safety procedures, and repair guidelines.
Předview Merz UL 508 Non-Fusible Disconnect Switches - Technical Specifications and Accessories
Comprehensive guide to Merz UL 508 Non-Fusible Disconnect Switches, covering DIN rail mount, front door mount, and enclosed types, along with technical specifications, agency approvals, and available accessories.