Uživatelská příručka k digitálnímu programovatelnému termostatu Robertshaw RS3110 s 5-2denním spotřebičem

Zavedení

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Robertshaw RS3110 Digital 5-2 Day Programmable Thermostat. The RS3110 is designed to offer convenient and efficient temperature control for your heating and cooling systems.

Key features include simple touch button controls for weekly programming and worry-free memory retention to maintain settings during power outages.

Konec produktuview

This image displays the front of the Robertshaw RS3110 thermostat, featuring a digital screen that shows the current temperature (76 degrees) and time (12:29). Below the screen are two control buttons. The Robertshaw logo is visible at the bottom left.

The Robertshaw RS3110 is a digital, 5-2 day programmable thermostat designed for 1 Heat/1 Cool systems. It features a clear digital display and intuitive push-button controls for easy temperature management and scheduling.

Nastavení a instalace

Před zahájením instalace se ujistěte, že je napájení systému HVAC vypnuto jističem, abyste předešli úrazu elektrickým proudem.

1. Demontáž starého termostatu

1. Turn off power to the heating and cooling system at the main fuse or circuit breaker.
2. Odstraňte kryt starého termostatu.
3. Take a picture of the wiring connections for reference. Label each wire with the corresponding terminal letter (e.g., R, W, Y, G).
4. Disconnect the wires and remove the old thermostat's mounting plate from the wall.

2. Mounting the RS3110 Thermostat

1. Separate the front cover of the RS3110 from its base plate.
2. Position the new base plate against the wall, ensuring wires can pass through the opening.
3. Mark the screw holes and drill pilot holes if necessary.
4. Připevněte základní desku ke zdi pomocí dodaných šroubů.

3. Zapojení

Connect the labeled wires from your system to the corresponding terminals on the RS3110 base plate. Refer to the wiring diagram provided with your thermostat for specific connections. This thermostat is compatible with 1 Heat/1 Cool systems.

4. Instalace baterie

The RS3110 requires two AA batteries (included). Insert the batteries into the designated compartment, observing the correct polarity (+/-). The thermostat will retain settings during power outages due to its internal memory, but batteries are essential for operation.

5. Dokončení instalace

1. Carefully attach the front cover of the thermostat to the base plate.
2. Obnovte napájení systému HVAC pomocí jističe.
3. The thermostat display should now illuminate.

Návod k obsluze

1. Setting the Current Time and Day

Upon initial power-up or after battery replacement, you may need to set the current time and day. Refer to the specific instructions in your thermostat's included manual for button sequences to adjust these settings.

2. Výběr režimu systému

Use the system mode switch (typically located on the thermostat) to select between:

• TEPLO: Aktivuje systém vytápění.
• CHLADNÝ: Aktivuje chladicí systém.
• OFF: Vypíná jak topení, tak chlazení.

3. Nastavení teploty

Použijte UP a DOLŮ arrow buttons (or similar controls) on the thermostat to set your desired temperature. The display will show both the current room temperature and your setpoint.

4. Programming 5-2 Day Schedule

The RS3110 allows for 5-2 day programming, meaning you can set one schedule for weekdays (Monday-Friday) and another for weekends (Saturday-Sunday). This feature helps optimize energy usage and comfort.

Programovat:

1. Stiskněte tlačítko NAPROGRAMOVAT button (or similar, refer to your specific manual).
2. Použijte UP a DOLŮ buttons to adjust the start time and temperature for each program period (e.g., Wake, Leave, Return, Sleep).
3. Navigate through the days and periods using the appropriate buttons.
4. Save your settings once programming is complete.

5. Hold Function (Temporary Override)

To temporarily override the programmed schedule, adjust the temperature using the UP or DOLŮ buttons. The thermostat will maintain this new temperature until the next programmed period begins, or until you press a DRŽET or BĚH button to cancel the override.

6. Adjustable Temperature Differential

The RS3110 features an adjustable temperature differential, which controls the temperature range before the heating or cooling system activates. Adjusting this setting can prevent frequent cycling of your HVAC system. Consult your thermostat's full manual for instructions on how to access and modify this setting to suit your comfort preferences and system efficiency.

Údržba

1. Výměna baterie

When the low battery indicator appears on the display, replace the two AA batteries promptly. Although the thermostat retains programming during power outages, fresh batteries ensure continuous operation and prevent system shutdown.

1. Open the battery compartment (usually located on the side or front of the thermostat).
2. Vyjměte staré baterie.
3. Vložte dvě nové alkalické baterie typu AA a dbejte na správnou polaritu.
4. Zavřete přihrádku na baterie.

2. Čištění

Očistěte vnější povrch termostatu měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.

Odstraňování problémů

Specifikace