Návod k obsluze seismického vibračního senzoru DSC SS102

1. Úvod

The DSC SS102 Seismic Vibration Sensor is designed to detect shock and vibration, providing an essential layer of security for various applications. This manual provides detailed instructions for the proper installation, operation, and maintenance of the SS102 sensor to ensure optimal performance and reliability within your security system.

2. Klíčové vlastnosti

• Seismic vibration detection for enhanced security.
• Adjustable pulse count for false alarm prevention.
• Integrated LED indicator for status and testing.
• Suitable for indoor shock/vibration detection.
• Surface mount installation.

3. Bezpečnostní informace

Please read all instructions carefully before installing or operating the DSC SS102 sensor. Failure to follow these instructions may result in improper operation, damage to the device, or personal injury.

• Instalaci by měl provádět pouze kvalifikovaný personál.
• Disconnect power to the control panel before performing any wiring or maintenance.
• Ensure all wiring connections are secure and correct according to the control panel's specifications.
• Do not expose the sensor to extreme temperatures or moisture beyond its specified operating conditions.
• Toto zařízení je určeno pouze pro vnitřní použití.

4. Instalace a nastavení

Proper installation is crucial for the optimal performance of the SS102 sensor. Follow these steps carefully:

4.1 Místo montáže

• Select a solid, stable surface that is directly connected to the area you wish to protect (e.g., a wall, window frame, or safe).
• Avoid mounting on surfaces that are prone to excessive vibration from non-security related sources (e.g., heavy machinery, air conditioning units).
• Ujistěte se, že montážní povrch je čistý a suchý.

4.2 Fyzická instalace

1. Opatrně otevřete senzor casing to access mounting holes and terminals.
2. Using appropriate screws, securely mount the sensor to the chosen surface. Ensure it is firmly attached to transmit vibrations effectively.
3. Refer to the diagram below for typical mounting orientation and component identification.

Obrázek 1: DSC SS102 Seismic Vibration Sensor. This image shows the white rectangular sensor unit. Visible on its front face are the "DSC" logo, the word "SHOCKGUARD" embossed vertically, a small adjustment screw, and an LED indicator. The sensor is designed for surface mounting.

4.3 Zapojení

Connect the sensor to your alarm control panel according to the panel's instructions and the SS102 wiring terminals. Typically, this involves connecting to a zone input and power supply.

• Identify the alarm output terminals and power input terminals on the SS102.
• Connect the power supply (e.g., 12V DC) to the designated power terminals.
• Connect the alarm output to a supervised zone input on your control panel.
• Ensure proper polarity for power connections.

4.4 Sensitivity and Pulse Count Adjustment

The SS102 features adjustable sensitivity and pulse count to prevent false alarms while ensuring reliable detection.

• Nastavení citlivosti: Use a small screwdriver to adjust the sensitivity screw (refer to Figure 1). Turn clockwise to increase sensitivity, counter-clockwise to decrease. Test the sensor after each adjustment.
• Počet pulzů: The pulse count setting determines how many consecutive shock events are required within a short period to trigger an alarm. This helps differentiate between genuine threats from minor environmental disturbances. Consult your control panel or sensor documentation for specific pulse count settings if available, or adjust based on thorough testing.

5. Provoz

Once installed and configured, the DSC SS102 sensor continuously monitors for seismic vibrations. When the detected vibration level exceeds the set sensitivity threshold for the specified pulse count, the sensor will trigger an alarm condition, signaling the connected control panel.

• LED indikátor: The integrated LED (refer to Figure 1) provides visual feedback during testing and operation. It typically illuminates briefly upon detection of a shock event, and may indicate an alarm condition depending on the system's configuration.
• Testování: Regularly test the sensor by applying controlled impacts to the protected surface (e.g., tapping firmly near the sensor) to ensure it triggers an alarm at the desired sensitivity level.

6. Údržba

The DSC SS102 sensor requires minimal maintenance to ensure long-term reliability.

• Čištění: Periodically wipe the sensor's exterior with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents, as these may damage the casing nebo vnitřních součástí.
• Testování: Perform functional tests at least annually, or more frequently in high-security applications, to verify proper operation and sensitivity settings.
• Kontrola prostředí: Ensure the sensor remains free from moisture, extreme temperatures, and physical damage.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized DSC dealer or distributor. Keep your proof of purchase for warranty claims.

For further assistance, visit the official DSC webnebo kontaktujte jejich oddělení zákaznických služeb.