Zavedení
This manual provides essential information for the proper installation, operation, and maintenance of the Intermatic 2T2502GA Pool/Spa Plastic Enclosure. This enclosure is designed to house compatible Intermatic T100 series time switches, offering protection in various environmental conditions.
Konec produktuview
The Intermatic 2T2502GA is a durable, rainproof plastic enclosure specifically engineered for pool and spa timer applications. Its robust construction ensures longevity and protection for internal electrical components.
- Materiál: Heavy-duty industrial grade plastic, beige finish.
- Environmentální hodnocení: NEMA 3R rated for both indoor and outdoor installations, providing protection against rain, sleet, and external ice formation.
- Prevence rzi: Constructed from plastic to prevent rust, making it ideal for humid or wet environments.
- Kompatibilita: Designed to house Intermatic T100 series time switches.
- Vyřazení: Features combination 0.5 and 0.75 inch nominal knockouts (one on the back, one on each side, and two on the bottom) for wiring convenience.
Obrázek 1: Přední strana view of the Intermatic 2T2502GA Plastic Enclosure in its closed position. This image displays the beige finish and the Intermatic logo.
Bezpečnostní informace
VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Instalaci a servis smí provádět pouze kvalifikovaný personál.
- Always disconnect power at the circuit breaker before installing or servicing the enclosure or any internal components.
- Ujistěte se, že veškeré zapojení splňuje národní a místní elektrotechnické předpisy.
- This plastic enclosure does not provide grounding for internal components. Proper grounding of the time switch and associated wiring must be established independently according to electrical codes.
- Do not exceed the maximum electrical ratings of the time switch installed within the enclosure.
Instalace a nastavení
- Místo montáže: Select a suitable indoor or outdoor location that is easily accessible for servicing and protected from physical damage. Ensure the surface is flat and capable of supporting the enclosure's weight.
- Mounting the Enclosure:
- Otevřete dvířka skříně.
- Use appropriate screws or fasteners (not included) to secure the enclosure to the mounting surface through the designated mounting holes.
- Preparing Knockouts:
- Identify the required knockout locations (back, sides, bottom) for conduit entry.
- Carefully remove the desired knockouts using a screwdriver and hammer. Exercise caution to avoid cracking the plastic.
- Install appropriate conduit connectors and conduits.
- Installing the Time Switch:
- The enclosure is designed for tool-free installation of compatible Intermatic T100 series time switches. The timer mechanism snaps into proprietary clips inside the box.
- Refer to the specific instruction manual for your Intermatic T100 series time switch for detailed wiring instructions.
- Ujistěte se, že všechna elektrická připojení jsou bezpečná a řádně izolovaná.
- Základy: As this is a plastic enclosure, it does not provide an inherent ground path. Ensure that the time switch and all associated wiring are properly grounded according to local electrical codes. This may involve using a separate grounding conductor.
- Uzavření krytu: Once installation and wiring are complete, securely close the enclosure door. The door features a tongue-in-groove design for a rainproof seal.
Obrázek 2: Interiér view of the Intermatic 2T2502GA Plastic Enclosure with the door open. This image shows the internal mounting clips for the time switch and the knockout locations.
Údržba
The Intermatic 2T2502GA enclosure requires minimal maintenance to ensure its protective function.
- Čištění: Periodically clean the exterior of the enclosure with a damp hadříkem odstraňte nečistoty a usazeniny. Nepoužívejte abrazivní čisticí prostředky.
- Inspekce: Regularly inspect the enclosure for any signs of physical damage, such as cracks, loose hinges, or a compromised latch. Ensure the door closes securely to maintain its rainproof rating.
- Integrita těsnění: Verify that the tongue-in-groove seal around the door remains intact and free of debris to prevent water ingress.
Odstraňování problémů
This section addresses common issues related to the enclosure itself. For issues with the time switch, refer to its specific manual.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Water inside enclosure | Door not fully closed; damaged seal; improperly installed conduit fittings. | Ensure door is latched securely. Inspect door seal for damage and replace if necessary. Verify conduit fittings are tight and sealed. |
| Enclosure door does not close securely | Damaged latch or hinges; obstruction. | Inspect latch and hinges for damage. Clear any obstructions. If damaged, the enclosure may need replacement. |
| Prasklý plast | Physical impact; improper knockout removal. | A cracked enclosure compromises its NEMA 3R rating. Replace the enclosure immediately to maintain protection. |
Specifikace
- Model: 2T2502GA
- Značka: Intermatic
- Materiál: Heavy-duty Industrial Grade Plastic
- Dokončit: Béžový
- Environmentální hodnocení: NEMA 3R (Rainproof)
- Rozměry (V x Š x H): 9-3/8 inches (23.8 cm) x 5-1/2 inches (14.0 cm) x 3-5/8 inches (9.2 cm)
- Vyřazení: Combination 0.5 and 0.75 inch nominal (one back, two sides, two bottom)
- Kompatibilita: Intermatic T100 series time switches
Záruka a podpora
Záruka: This product is covered by a 1-year warranty for replacement of the unit. Labor costs are not included.
For technical support or warranty claims, please contact Intermatic customer service. Refer to the official Intermatic webstránky s aktuálními kontaktními informacemi.
Note: Warranty terms are subject to change. Please refer to the official Intermatic warranty statement for the most up-to-date information.
