Uživatelská příručka k tradičnímu elektronickému zámku Kwikset 910 SmartCode s technologií Z-Wave

1. Konec produktuview

The Kwikset 910 SmartCode Traditional Electronic Deadbolt with Z-Wave Technology offers keyless entry and enhanced security for your home. This deadbolt integrates with Z-Wave home automation systems, allowing for remote control and monitoring. It features a backlit keypad for increased visibility and SmartKey Security as a backup keyway.

Klíčové vlastnosti:

• Keyless entry with a customizable keypad.
• Z-Wave technology for integration with compatible smart home systems.
• Program up to 30 user access codes.
• One-touch locking motorized deadbolt.
• SmartKey Security for easy re-keying and advanced break-in protection.
• Operates on 4 AA batteries.

2. Nastavení a instalace

Co je zahrnuto:

• Electronic deadbolt assembly
• Montážní hardware
• Klíče

Požadované nástroje:

• Šroubovák s křížovou hlavou
• Svinovací metr

Kroky instalace:

1. Připravte dveře: Ensure your door is properly prepped for a deadbolt. Check backset, cross-bore, and edge-bore dimensions.
2. Install Latch: Insert the latch into the door edge. Ensure the bolt is facing the correct direction. Secure with screws.
3. Instalace protiplechu: Nainstalujte západku na rám dveří a zarovnejte ji se západkou. Zajistěte ji šrouby.
4. Instalace vnější sestavy: Place the exterior keypad assembly on the door, ensuring the torque blade passes through the latch.
5. Instalace vnitřní montážní desky: Route the wiring harness through the mounting plate and secure the plate to the exterior assembly with screws.
6. Connect Wiring and Install Interior Assembly: Connect the wiring harness to the interior assembly. Align the torque blade with the turn piece shaft and secure the interior assembly to the mounting plate with screws.
7. Nainstalujte baterie: Vložte 4 baterie typu AA do bateriového bloku.
8. Proveďte proces manipulace s dveřmi: While holding down the Lock button on the keypad, insert the battery pack. Continue holding until the deadbolt cycles and stops, indicating successful door handing.

3. Návod k obsluze

Zamykání dveří:

• Zamykání jedním dotykem: Press the Lock button on the keypad. The deadbolt will extend to lock the door.
• Ruční zamykání: From the interior, turn the thumb turn to the locked position.

Odemykání dveří:

• Použití uživatelského kódu: Enter a valid 4-8 digit user code on the keypad. The deadbolt will retract to unlock the door.
• Použití klíče: Insert the physical key into the keyway and turn it to unlock the door.
• Manual Unlocking: From the interior, turn the thumb turn to the unlocked position.

Programování uživatelských kódů:

1. Otevřete dveře.
2. Stiskněte jednou tlačítko Program.
3. Zadejte nový 4–8místný uživatelský kód.
4. Press the Lock button to save the code.
5. Test the new user code with the door open to ensure it works correctly.

To add additional user codes, repeat the process, pressing the Program button the corresponding number of times (e.g., twice for the second code, three times for the third, etc.).

4. Údržba

Výměna baterie:

When the batteries are low, the lock will emit a series of beeps and the keypad will flash red. To replace the batteries:

1. Sejměte vnitřní kryt.
2. Vyjměte baterii.
3. Replace all four AA batteries with new alkaline batteries.
4. Reinsert the battery pack and replace the cover.

SmartKey Re-keying:

The SmartKey Security feature allows you to re-key your lock to a new key in seconds, providing convenience and enhanced security.

1. Insert your functioning key (the key currently operating the lock) and turn it 90 degrees clockwise.
2. Zasuňte nástroj SmartKey zcela a pevně do otvoru SmartKey.
3. Odstraňte nástroj SmartKey.
4. Vyjměte funkční klíč.
5. Insert your new key fully and firmly into the keyway.
6. Turn the new key 90 degrees counter-clockwise.
7. Remove the new key. The lock is now re-keyed to the new key.

5. Řešení problémů

Běžné problémy a řešení:

• Zámek nereaguje: Check battery levels and replace if necessary. Ensure the battery pack is properly seated.
• Uživatelský kód nefunguje: Verify the code is entered correctly. Re-program the user code if unsure.
• Závora se nevysouvá/nezasouvá plynule: Check for obstructions in the door frame or latch. Ensure the lock is properly aligned and mounted.
• Z-Wave connectivity issues: Refer to your Z-Wave hub's instructions for pairing and troubleshooting. Ensure the lock is within range of the hub.
• Klávesnice se nerozsvítí: Check batteries. If the issue persists, contact customer support.

6. Specifikace

7. Záruka a podpora

Kwikset products are designed for durability and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Kwikset website. For technical assistance, troubleshooting, or to inquire about replacement parts, please contact Kwikset customer support.

Online zdroje: Další podporu a zdroje naleznete na Kwikset Store on Amazon.