TC Electronic 996004005

TC Electronic VoiceTone D1 Vocal Effects Processor User Manual

Model: 996004005

Zavedení

The TC Electronic VoiceTone D1 is a compact vocal effects processor designed to enhance live vocals with realistic doubling, octave, and detune effects. This pedal provides studio-quality vocal thickening in an easy-to-use format, making it ideal for live performances.

Key features include bringing studio doubling to live performance, Mic-Control for remote on/off via TC-Helicon MP-75 microphone, and offering a classic hit vocal effect.

Konec produktuview

Přední view of the TC Electronic VoiceTone D1 pedal, showing the TIGHT/LOOSE and DRY/WET knobs, the footswitch, and the D1 Doubling & Detune label.

Přední view of the VoiceTone D1, highlighting the main controls and effect indicator.

Úhlové view of the TC Electronic VoiceTone D1 pedal, showing the top surface with controls and the right side with the Mic Gain knob.

Úhlové view of the pedal, showcasing its compact design and the Mic Gain control on the side.

Další úhlový view of the TC Electronic VoiceTone D1 pedal, showing the top surface with controls and the left side with the Mic Control input.

Alternate angled view, providing a clear look at the Mic Control input on the left side.

Zadní view of the TC Electronic VoiceTone D1 pedal, displaying the USB port, power input, XLR OUT, and XLR MIC input.

Rear panel of the D1, detailing the various input and output connections for audio and power.

Bottom label of the TC Electronic VoiceTone D1 pedal, showing compliance information, manufacturer details, and power requirements (12V 400mA).

Product label with regulatory compliance and power specifications.

Nastavení

Vybalování

Carefully remove the VoiceTone D1 from its packaging. Retain the packaging for future transport or storage. Inspect the unit for any signs of damage that may have occurred during shipping.

Připojení napájení

Connect the included 9V DC power adapter to the 'POWER' input on the rear of the VoiceTone D1. Plug the power adapter into a suitable electrical outlet. Ensure the power source provides stable voltage to prevent damage to the unit.

Audio připojení

  • Vstup MIC: Connect your microphone to the 'MIC' XLR input on the rear panel using a standard XLR 3-pin cable.
  • OUT Output: Connect the 'OUT' XLR output to your mixer, audio interface, or next pedal in your signal chain using a standard XLR 3-pin cable.

Připojení USB

The VoiceTone D1 features a USB port for firmware updates and potential future software integration. Connect a standard USB cable from the pedal to your computer if required for these purposes. This connection is not necessary for basic operation.

Návod k obsluze

Ovládání je ukončenoview

  • TIGHT/LOOSE Knob: This rotary knob selects the doubling effect type. Rotate it to choose between various doubling and detune styles.
  • DRY/WET Knob: This knob controls the blend between your original (dry) vocal signal and the processed (wet) effect signal. Turn clockwise to increase the effect level.
  • Nožní spínač: The large footswitch on the front of the pedal toggles the effect on and off. The LED indicator will illuminate when the effect is active.
  • Knoflík MIC GAIN: Located on the side, this knob adjusts the input sensitivity for your microphone. Set it to an appropriate level to avoid clipping or low signal.
  • MIC CONTROL Input: This input allows for remote control of the effect via a compatible TC-Helicon MP-75 microphone.

Režimy efektů

The TIGHT/LOOSE knob offers a range of doubling and detune effects:

  • TĚSNÝ: Creates a precise, in-unison doubling effect, ideal for a clean, layered sound.
  • VOLNÝ: Produces a more natural, slightly offset doubling, simulating two distinct vocalists.
  • SKUPINA: Simulates multiple voices, adding depth and presence to your lead vocal.
  • ROZLADIT: Adds a slight pitch shift to the doubled voice for a thicker, chorused sound.
  • THICK: Combines doubling with a subtle detune for a rich, full vocal texture.
  • OCT UP: Adds a voice an octave higher than your original vocal.
  • OCT DN: Adds a voice an octave lower than your original vocal.
  • SHOUT: Provides a powerful, layered vocal effect, often used for anthemic or impactful sections.

Pomocí nožního spínače

Press the footswitch to engage or bypass the selected effect. The LED will light up when the effect is active. For hands-free control, connect a TC-Helicon MP-75 microphone to the MIC CONTROL input, allowing you to toggle the effect directly from your microphone.

Údržba

To ensure the longevity and optimal performance of your VoiceTone D1, follow these maintenance guidelines:

  • Čištění: Keep the unit clean and free from dust. Use a soft, dry cloth to wipe down the exterior. Do not use liquid cleaners, abrasive materials, or solvents, as these can damage the finish and internal components.
  • Prostředí: Avoid exposing the pedal to extreme temperatures, high humidity, direct sunlight, or excessive vibrations. Operate the unit in a well-ventilated area.
  • Skladování: When not in use for extended periods, disconnect the power adapter and store the unit in a cool, dry place, preferably in its original packaging or a protective case.
  • Moc: Always use the specified 9V DC power adapter. Using an incorrect power supply can damage the unit and void the warranty.

Odstraňování problémů

If you encounter issues with your VoiceTone D1, refer to the table below for common problems and their solutions.

ProblémMožná příčinaŘešení
Žádný zvukový výstup.Incorrect cable connections, power issue, DRY/WET knob set to dry.Verify all XLR cables are securely connected to the MIC input and OUT output. Ensure the power adapter is properly connected and the unit is powered on. Increase the DRY/WET knob setting.
Effect is too subtle or too strong.DRY/WET knob setting is not optimal.Adjust the DRY/WET knob to achieve the desired balance between your original vocal and the effect.
Jednotka se nezapne.Power supply issue, faulty outlet.Ensure the power adapter is correctly plugged into both the pedal and a working electrical outlet. Confirm the power adapter is the correct 9V DC type.
Zkreslený nebo zašuměný zvuk.Input gain too high, faulty cables.Adjust the MIC GAIN knob to a lower setting. Test with different XLR cables to rule out cable issues.

Specifikace

  • Značka: TC Electronic
  • Model: 996004005
  • Hmotnost položky: Přibližně 1.23 libry (560 gramů)
  • Rozměry produktu: Přibližně 6 x 7 x 3.5 palce
  • Zdroj napájení: Elektrický kabel
  • svtage: 9 V DC
  • Amperage: 0.01 miliamps (typical operating current)
  • Hardwarové rozhraní: USB
  • Formát signálu: Analogový
  • První k dispozici: 11. ledna 2011

Záruka a podpora

Specific warranty details for the TC Electronic VoiceTone D1 are not provided within this manual. Please refer to the warranty information included with your product packaging or visit the official TC Electronic webstránky, kde najdete nejaktuálnější záruční podmínky.

For technical support, service, or further assistance with your VoiceTone D1, please contact TC Electronic customer support through their official website or authorized service centers. Provide your product model number and serial number when seeking support.

Související dokumenty - 996004005

Předview Stručný návod k obsluze TC Electronic M100
Stručný návod k obsluze stereo multiefektového procesoru TC Electronic M100 s podrobným popisem jeho funkcí, ovládacích prvků, efektů a bezpečnostních informací.
Předview Stručný návod k obsluze TC Electronic PLETHORA X3: Pedalboard TonePrint
Stručný návod k nastavení a používání pedalboardu TC Electronic PLETHORA X3 TonePrint, který obsahuje 127 desek, 3 sloty pro pedály, nožní spínače MASH a looper Tape Deck. Naučte se o vytváření desek, používání TonePrints a připojení Bluetooth.
Předview TC Electronic PLETHORA X5 Quick Start Guide: TonePrint Pedalboard with MASH Footswitches
Get started quickly with the TC Electronic PLETHORA X5, a versatile TonePrint pedalboard featuring five MASH footswitches. Learn about its controls, features, specifications, and how to transfer TonePrints.
Předview Uživatelská příručka k TC Electronic Ditto X4 Looper - Průvodce kytarovými efektovými pedály
Komplexní uživatelská příručka pro TC Electronic Ditto X4 Looper, dvoustopý kytarový looper. Seznamte se s jeho funkcemi, ovládacími prvky, efekty, nastavením, schématy zapojení a pokročilými funkcemi pro vytváření a správu smyček.
Předview Stručný návod k obsluze pro IMPULSE IR LOADER od TC Electronic
Stručný návod k použití pro načítač TC Electronic IMPULSE IR LOADER, podrobný popis ovládacích prvků, režimů, načítání vlastních IR a informace o shodě s FCC.
Předview Uživatelská příručka k mini kompresoru TC Electronic HyperGravity
Uživatelská příručka pro kompresor TC Electronic HyperGravity Mini s podrobným popisem jeho funkcí, nastavení, ovládacích prvků, funkce TonePrint, aktualizací firmwaru a specifikací. Naučte se, jak dosáhnout profesionálně vybroušených tónů s jeho nejmodernější vícepásmovou kompresí.