1. Úvod
This manual provides instructions for the installation and maintenance of the Streamlight Battery Door, designed specifically as a replacement part for Streamlight TLR-1 and TLR-2 Weapon-Mounted Tactical Flashlights.
Figure 1: Streamlight Battery Door for TLR-1/TLR-2. This image shows the replacement battery door assembly.
2. Instalace
The Streamlight Battery Door is a direct replacement for the original battery door and switch assembly on TLR-1 and TLR-2 weapon lights. Installation requires careful handling of a small pin.
2.1 Požadované nástroje
- Small flathead jeweler's screwdriver (optional, for pin alignment)
2.2 kroky instalace
- Remove the Old Battery Door: Carefully push out the retaining pin from your existing battery cap assembly. This pin secures the battery door to the flashlight body.
- Position the New Battery Door: Place the new Streamlight Battery Door into the slot on the flashlight body where the old cap was removed.
- Vložte pojistný kolík: Slide the retaining pin back through the flashlight body and the new battery door.
- Aligning the Pin (if needed): If the pin does not slide easily, use a small flathead jeweler's screwdriver to gently lift or adjust the internal components of the battery door assembly to align the pin holes. Do not force the pin.
- Zajistěte kolík: Ensure the pin is fully inserted and secure, holding the new battery door firmly in place.
Poznámka: Proper installation ensures the battery door functions correctly, providing both power connection and environmental sealing for your TLR-1 or TLR-2 flashlight.
3. Provoz
Once installed, the battery door facilitates the power connection for your Streamlight TLR-1 or TLR-2 flashlight. Ensure the door is fully closed and secured by the retaining pin for proper operation and to maintain the flashlight's water resistance.
- Vložení baterie: Open the battery door, insert the correct batteries (not included) according to the polarity markings inside the flashlight, then close the door securely.
- Funkce spínače: The battery door assembly includes the switch mechanism for momentary-on or constant-on light functions, depending on your TLR model. Verify that the switch operates smoothly after installation.
4. Údržba
Regular maintenance of the battery door ensures the longevity and reliability of your Streamlight flashlight.
- Inspekce: Periodically inspect the battery door and its gasket for any signs of wear, damage, or corrosion. A damaged gasket can compromise the flashlight's water resistance.
- Čištění: Clean the battery door and contact points with a dry, lint-free cloth. Avoid using abrasive cleaners or solvents.
- Péče o těsnění: If the gasket appears dry, a small amount of silicone grease can be applied to maintain its flexibility and sealing properties. Ensure the gasket is seated correctly before closing the door.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Flashlight does not turn on after battery door replacement. |
|
|
| Dvířka baterie se správně nezavírají. |
|
|
6. Specifikace
- Typ produktu: Replacement Battery Door and Switch Assembly
- Kompatibilita: Streamlight TLR-1 and TLR-2 Weapon-Mounted Tactical Flashlights
- Výrobce: Společnost Streamlight, Inc.
- Země původu: USA
- Hmotnost položky: Přibližně 45 g (1.6 oz)
- Baterie v ceně: Žádný
7. Informace o záruce
This product is covered by a warranty policy. For detailed information regarding warranty terms and conditions, please refer to the official Streamlight website or contact Streamlight customer support. A 10-day replacement policy may be available through your retailer.
For warranty claims or service, retain your proof of purchase.
8. Zákaznická podpora
For further assistance, technical support, or inquiries regarding your Streamlight Battery Door, please visit the official Streamlight webnebo kontaktujte jejich oddělení zákaznických služeb.
Oficiální Webmísto: www.streamlight.com
Poznámka: Specific contact details may vary by region. Please check the webstránky s nejaktuálnějšími informacemi.
