Zavedení
This manual provides essential information for the proper use, maintenance, and care of your Oster OS CryogenX Blade 7. Designed for professional animal grooming, this high-quality blade ensures efficient and precise cutting when used with compatible detachable blade clippers. Please read these instructions carefully before first use to ensure optimal performance and longevity of your blade.
Konec produktuview
Obrázek: Přední strana view of the Oster CryogenX Blade 7, clearly showing the number '7' and 'Oster CryogenX AgION' branding. This blade is designed for precise grooming.
Obrázek: Zadní view of an Oster CryogenX blade, highlighting the attachment mechanism and the Oster logo. This view shows the back of the blade where it connects to the clipper.
The Oster OS CryogenX Blade 7 is a precision-engineered grooming tool featuring CryogenX technology for enhanced durability and sharpness, and AgION antimicrobial coating for improved hygiene. It is a skip-tooth blade, ideal for specific grooming tasks requiring a coarser cut or for preparing coats for finer finishing.
Nastavení
- Kontrola kompatibility: Ensure your clipper is compatible with detachable Oster A5-style blades. This blade is designed to fit most professional detachable blade clippers.
- Clean Clipper Drive Lever: Before attaching the blade, ensure the clipper's drive lever is clean and free of hair or debris.
- Připojit čepel: With the clipper turned off and unplugged, align the blade's hinge with the clipper's hinge slots. Push the blade down firmly until it clicks securely into place. The blade should sit flush against the clipper head.
- Initial Oiling: Apply a few drops of clipper blade oil to the teeth and bearing surfaces of the blade before first use. This lubricates the blade and helps prevent overheating.
Návod k obsluze
For optimal grooming results and to ensure the longevity of your blade, follow these operating guidelines:
- Prepare the Animal: Ensure the animal's coat is clean, dry, and free of mats or tangles. Bathe and dry the animal thoroughly before clipping, if necessary.
- Apply Oil Regularly: During extended grooming sessions, re-oil the blade every 10-15 minutes. This reduces friction, heat, and wear on the blade.
- Správná technika: Hold the clipper firmly and move it smoothly against the direction of hair growth. Use long, even strokes. Avoid pressing too hard, as this can cause irritation to the animal's skin and dull the blade.
- Monitor teploty čepele: Periodically check the blade temperature by touching it. If it becomes too hot, turn off the clipper, remove the blade, and allow it to cool. Using a hot blade can cause discomfort or burns to the animal.
- Čistěte během používání: Use a blade brush to remove accumulated hair from the blade teeth frequently during grooming.
Údržba
Proper maintenance is crucial for extending the life and performance of your Oster CryogenX Blade 7.
- Čištění po každém použití:
- Vypněte a odpojte zastřihovač ze zásuvky.
- Vyjměte čepel ze zastřihovače.
- Use a stiff brush to remove all hair and debris from between the blade teeth and from the blade's underside.
- For thorough cleaning, use a blade wash solution. Dip the blade into the solution while the clipper is running (for a few seconds only), then turn off the clipper, remove the blade, and wipe it dry immediately.
- Olejování: After cleaning and before storage, apply 2-3 drops of clipper blade oil across the top of the blade teeth and 1-2 drops on each rail guide (the flat surfaces where the cutter blade slides). Run the clipper for a few seconds to distribute the oil, then wipe off any excess.
- Skladování: Store blades in a clean, dry, and secure location, preferably in a blade case or tray, to prevent damage and corrosion. Avoid storing in humid environments.
- Ostření: Over time, blades will become dull. For best results, have your Oster CryogenX blades professionally sharpened by a reputable blade sharpening service. Do not attempt to sharpen them yourself unless you have specialized equipment and training.
- Inspekce: Regularly inspect the blade for any signs of damage, such as bent teeth or cracks. Replace damaged blades immediately to prevent injury or poor grooming results.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Nůž neřeže efektivně | Dull blade, hair buildup, insufficient oil, incorrect blade attachment. | Clean and oil the blade. Ensure blade is properly attached. If still dull, professional sharpening or replacement is needed. |
| Blade gets hot quickly | Lack of lubrication, excessive friction, dirty blade, prolonged use. | Apply more clipper blade oil. Clean the blade thoroughly. Allow blade to cool down. Consider using a blade coolant spray. |
| Blade pulls hair | Dull blade, hair buildup, improper grooming technique. | Clean and oil the blade. Ensure the animal's coat is clean and tangle-free. Use proper grooming strokes. Sharpen or replace blade if necessary. |
| Blade rusts | Improper drying after cleaning, storage in humid conditions. | Always dry blades thoroughly after cleaning. Apply oil before storage. Store in a dry environment. |
Specifikace
- Značka: Oster
- Model: 008OST-78919-056
- Materiál: Nerez
- Barva: Stříbro
- Počet zubů: 7 (Skip-Tooth)
- Styl: Kompaktní
- Kompatibilní materiál: Fur, Hair
- Hmotnost položky: 0.01 unce (přibližně 0.28 gramu)
- Rozměry balení: 4.72 x 3.54 x 0.87 palce
- UPC: 034264416543
- Výrobce: Oster-Sunbeam
Záruka a podpora
Specific warranty information for the Oster OS CryogenX Blade 7 is not provided within this manual. For details regarding warranty coverage, terms, and conditions, please refer to the official Oster website or contact Oster customer support directly.
For technical support, product inquiries, or to locate authorized service centers, please visit the Oster Official Store on Amazon nebo úředník výrobce website. Always ensure you are purchasing genuine Oster products and replacement parts from authorized retailers.
