Zavedení
Děkuji za nákupasing the Acctim Auric 12342 Superbrite Crescendo Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use and retain it for future reference.
Důležité bezpečnostní informace
- Nevystavujte jednotku extrémním teplotám, přímému slunečnímu záření nebo vysoké vlhkosti.
- Zabraňte pádu jednotky na zem nebo jejímu vystavení silným nárazům.
- Nepokoušejte se jednotku rozebírat ani upravovat. Ztratíte tak záruku.
- Používejte pouze specifikovaný typ baterií (2 x AA baterie).
- Staré baterie zlikvidujte zodpovědně v souladu s místními předpisy.
- Uchovávejte mimo dosah dětí.
Obsah balení
- Acctim Auric 12342 Digital Alarm Clock
- Uživatelská příručka (tento dokument)
Poznámka: 2 x AA batteries are required and are ne součástí balení.
Vlastnosti produktu

Obrázek 1: Přední view of the Acctim Auric 12342 digital alarm clock, showcasing its large LCD display and compact design.
- Large digit LCD display
- Battery operated for portability
- Superbrite blue backlight for clear visibility
- Crescendo alarm with increasinobjem v g
- Funkce Snooze
- Elegantní design
- Indikátor AM/PM
Konec produktuview
Familiarize yourself with the alarm clock's components before operation.

Obrázek 2: Nahoru view of the Acctim Auric 12342 alarm clock, illustrating the control buttons and approximate dimensions. The large button at the top is for SNOOZE/LIGHT. Below it are the MIN and HR buttons for setting time and alarm. A slider switch is visible for selecting Time Set (T.SET), Alarm Set (AL.SET), Alarm On (AL.ON), and Alarm Off (AL.OFF) functions.
- Tlačítko ODLOŽENÍ/OSVĚTLENÍ: Activates the backlight and snooze function.
- Tlačítko HR: Upraví hodiny pro nastavení času a budíku.
- Tlačítko MIN: Upraví minuty pro nastavení času a budíku.
- Function Slider Switch:
- T.SET: Time Setting mode.
- AL.SET: Alarm Setting mode.
- AL.ON: Alarm On.
- AL.OFF: Alarm vypnutý.
- LCD displej: Shows time, AM/PM indicator, and alarm status.
Nastavení
1. Instalace baterie
- Najděte krytku přihrádky na baterie na zadní straně budíku.
- Kryt sejměte jeho posunutím nebo zvednutím.
- Insert 2 new AA batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Bezpečně nasaďte kryt prostoru pro baterie.
The clock will power on automatically once batteries are inserted. The display may flash, indicating it's ready for time setting.
Návod k obsluze
1. Nastavení času
- Slide the Function Switch to the T.SET position. The time digits will start flashing.
- Stiskněte tlačítko HR button repeatedly to set the hour. Observe the AM/PM indicator for correct 12-hour format.
- Stiskněte tlačítko MIN button repeatedly to set the minutes.
- Once the desired time is set, slide the Function Switch back to the AL.VYP. or AL.ON position to save the time.
2. Nastavení alarmu
- Slide the Function Switch to the AL.SET position. The alarm time digits will start flashing.
- Stiskněte tlačítko HR button repeatedly to set the alarm hour. Observe the AM/PM indicator.
- Stiskněte tlačítko MIN button repeatedly to set the alarm minutes.
- Once the desired alarm time is set, slide the Function Switch back to the AL.ON position to activate the alarm, or AL.VYP. jej deaktivovat.
3. Aktivace/deaktivace alarmu
- To activate the alarm, slide the Function Switch to the AL.ON position. An alarm icon will appear on the display.
- To deactivate the alarm, slide the Function Switch to the AL.VYP. position. The alarm icon will disappear.
4. Using the Snooze and Backlight Function
- Když zazvoní budík, stiskněte velké SNOOZE / SVĚTLO button on top of the clock to temporarily stop the alarm. The alarm will sound again after approximately 4-5 minutes.
- To activate the blue backlight at any time, press the large SNOOZE / SVĚTLO tlačítko. Podsvícení se na několik sekund rozsvítí.
Údržba
- Čištění: Hodiny otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Výměna baterie: When the display dims or the alarm function becomes unreliable, replace both AA batteries with new ones. Follow the battery installation steps in the Setup section.
- Skladování: Pokud hodiny nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej hodin je prázdný nebo tmavý. | Baterie jsou slabé nebo nesprávně vložené. | Vyměňte za nové baterie typu AA a dbejte na správnou polaritu. |
| Alarm se nespustí. | Alarm is not activated (AL.OFF). Alarm time is incorrectly set. | Slide the Function Switch to AL.ON. Check and reset the alarm time. |
| Time or alarm cannot be set. | Function Switch is not in the correct position. | Ensure the Function Switch is set to T.SET for time or AL.SET pro poplach. |
| Podsvícení nefunguje. | Baterie jsou vybité. | Vyměňte baterie za nové AA. |
Specifikace
- Značka: Acctim
- Číslo modelu: 12342
- Barva: Bílý
- Materiál: Plast
- Typ displeje: Digitální LCD
- Zdroj napájení: Battery powered (2 x AA batteries, not included)
- Rozměry produktu (D x Š x V): 5.21 x 3.81 x 10.49 cm (přibližně 2.05 x 1.5 x 4.13 palce)
- Hmotnost položky: 102 gramů (přibližně 0.22 libry)
- Speciální vlastnosti: Alarm, Snooze, Superbrite Blue Backlight, Crescendo Alarm
- Vnitřní/venkovní použití: Krytý
Záruka a podpora
The Acctim Auric 12342 Digital Alarm Clock comes with a jednoletá záruka from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact Acctim customer service through their official webna webu nebo u prodejce, kde byl produkt zakoupen.
Uschovejte si prosím doklad o koupi pro účely záruky.





