Zavedení
This manual provides instructions for the installation, operation, and maintenance of the Altronix OLS120 Power Supply/Charger. The OLS120 is designed to provide regulated 12VDC or 24VDC power at 4 amps, with integrated AC and battery monitoring capabilities, utilizing a 115VAC input.
Důležité bezpečnostní pokyny
- Instalaci a servis by měl provádět pouze kvalifikovaný servisní personál.
- To reduce the risk of electric shock, disconnect AC power before servicing.
- Zajistěte správné větrání, aby nedošlo k přehřátí.
- Nevystavujte jednotku dešti nebo vlhkosti.
- Use only recommended battery types for backup power.
Konec produktuview
The Altronix OLS120 is a robust power supply/charger unit engineered for reliable performance in various applications requiring stable DC power and battery backup.
Klíčové vlastnosti
- Selectable 12VDC or 24VDC output.
- 4 amp continuous supply current.
- Integrated AC and battery monitoring.
- 115VAC input for power.
Identifikace součásti
This image displays the Altronix OLS120 circuit board, highlighting various components essential for its operation. Familiarize yourself with these components before installation.
Klíčové komponenty:
- svtage Přepínač voliče: Located at the top right, labeled "OFF 24VDC ON 12VDC". This switch allows selection between 12VDC and 24VDC output.
- AC Input Terminals: Positioned at the bottom left, marked for 115VAC input connections.
- DC výstupní svorky: Located at the bottom right, these terminals are for connecting devices that require 12VDC or 24VDC power.
- Svorky baterie: Found at the bottom right, near the PTCs, for connecting backup batteries.
- AC Fail Indicator (LED): An LED near the "AC FAL" label, which illuminates upon loss of AC power.
- Low Battery Indicator (LED): An LED near the "LOW BAT" label, indicating a low battery condition.
- Transformátor: A central component, often labeled with part numbers like "P POL-30030", responsible for stepping down the AC voltage.
- Kondenzátory: Large cylindrical components (e.g., "C2", "C29A") used for filtering and energy storage.
- Fuses/PTCs: Overcurrent protection devices (e.g., "PTC1", "PTC2") to safeguard the circuit.
Nastavení a instalace
Krok 1: Montáž
Securely mount the OLS120 in a suitable enclosure or location, ensuring adequate ventilation to prevent heat buildup.
Krok 2: Svtage Výběr
Najděte voltage selector switch (labeled "OFF 24VDC ON 12VDC") on the circuit board. Set the switch to the desired output voltage (12VDC or 24VDC) before connecting any power.
Step 3: AC Power Connection
Connect the 115VAC input power to the designated AC input terminals. Ensure proper polarity and secure connections. Refer to local electrical codes for wiring practices.
Step 4: DC Output Connection
Connect your devices requiring DC power to the DC output terminals. Observe correct polarity to prevent damage to the connected equipment.
Step 5: Battery Connection (Optional)
For battery backup functionality, connect a suitable rechargeable battery to the battery terminals. Ensure correct polarity. The OLS120 will charge the battery and automatically switch to battery power upon AC failure.
Operace
Zapnutí
Once all connections are secure and verified, apply 115VAC power to the unit. The unit will power on and begin providing regulated DC output.
Stavové indikátory
- AC Fail (LED): This indicator illuminates when the AC input power is lost, signaling that the unit is operating on battery backup (if connected).
- Low Bat (LED): This indicator illuminates when the connected battery voltage drops below a pre-set threshold, indicating that the battery requires charging or replacement.
Údržba
Obecná péče
Keep the unit clean and free from dust accumulation. Ensure that all ventilation openings are not obstructed to maintain optimal operating temperature.
Údržba baterie
If a backup battery is used, periodically check its condition and charge level. Replace the battery as recommended by the battery manufacturer or when its performance degrades.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný DC výstup | No AC input power | Check AC power source and connections. |
| Žádný DC výstup | Nesprávný svtage výběr | Ověřte svtage selector switch is set correctly (12VDC or 24VDC). |
| AC Fail LED On | Loss of AC power | Restore AC power. |
| Low Bat LED On | Vybitá nebo vadná baterie | Check battery charge and condition; replace if necessary. |
| Přerušovaný výstup | Uvolněné spoje | Zajistěte všechna kabelová spojení. |
For issues not listed above, or if troubleshooting steps do not resolve the problem, please contact Altronix technical support for further assistance.
Specifikace
- Rozměry produktu: 8.4 x 5.7 x 2.9 palce
- Hmotnost položky: 1.2 libry
- Výstupní objemtage: 12VDC or 24VDC (selectable)
- Výstupní proud: 4 amp
- Vstupní objemtage: 115VAC
- Výrobce: ALTRONIX
- Číslo modelu: OLS120D2X
- Datum první dostupnosti: 31. července 2010
Záruka a technická podpora
Altronix products are backed by a manufacturer's warranty. For specific warranty details, terms, and conditions, please refer to the official Altronix webwebu nebo v dokumentaci dodané s vaším nákupem.
For technical assistance, product inquiries, or support, please contact Altronix customer service directly. Contact information can typically be found on the manufacturer's webmísto.
Manufacturer: Altronix Corp.
