1. Úvod
The Altronix NETWAY3012 is a 12VDC/30W NetWay midspan adapter designed to provide power and data over a single Ethernet cable to IP cameras and other compatible devices. This manual provides essential information for the proper installation, operation, and maintenance of your NETWAY3012 adapter.
This product is UL/cUL Listed (UL60950-1), ensuring compliance with safety standards for information technology equipment.
2. Konec produktuview
Figure 1: Altronix NETWAY3012 MidSpan Adapter. This image shows the compact black enclosure of the adapter with its label on top, displaying "Altronix Netway Netway3012 Adapter" and a CE mark. The front panel features two Ethernet ports (RJ45) and a terminal block for power connections, along with a small red switch or indicator.
The NETWAY3012 is a compact device that facilitates Power over Ethernet (PoE) functionality, allowing for simplified cabling in network installations. It acts as an intermediary device, injecting power into an Ethernet cable to power remote devices without the need for separate power outlets at the device location.
3. Nastavení a instalace
Before installation, ensure all power sources are disconnected. Refer to local electrical codes and regulations for proper installation procedures.
- Montáž: Position the NETWAY3012 in a secure, dry location, away from direct sunlight and excessive heat. Ensure adequate ventilation.
- Připojení napájení: Connect a 12VDC power source to the designated power input terminals on the adapter. Observe correct polarity (+/-). The adapter requires a 12VDC input to deliver power to the connected PoE device.
- Data Input (LAN): Connect an Ethernet cable from your network switch or router to the "LAN IN" port on the NETWAY3012 adapter. This port receives data from your network.
- PoE Output (PoE OUT): Connect an Ethernet cable from the "PoE OUT" port on the NETWAY3012 adapter to your PoE-compatible device (e.g., IP camera, VoIP phone, wireless access point). This cable will carry both data and power to the device.
- Zapnutí: Once all connections are secure, connect the 12VDC power source to the adapter. Observe any indicator lights for proper operation.
Poznámka: Ensure the connected device is compatible with the 12VDC/30W power output provided by the NETWAY3012 to prevent damage.
4. Návod k obsluze
The Altronix NETWAY3012 operates automatically once properly connected and powered. It functions as a midspan Power over Ethernet injector.
- Dodávka energie: The adapter injects 12VDC power into the Ethernet cable connected to the "PoE OUT" port, allowing the connected PoE device to receive power directly through the network cable.
- Data Passthrough: Network data from the "LAN IN" port is passed through to the "PoE OUT" port without modification, ensuring seamless network communication.
- Indikátory stavu: (If applicable, refer to device for specific LED indicators) Typically, a power LED indicates the unit is receiving input power, and link/activity LEDs on the Ethernet ports indicate data connection and traffic.
No user configuration is typically required for the basic operation of this midspan adapter.
5. Údržba
The NETWAY3012 is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity:
- Čištění: Před čištěním odpojte napájení. K otření vnějšího povrchu použijte měkký, suchý hadřík. Nepoužívejte tekuté ani aerosolové čisticí prostředky.
- Větrání: Ensure that the adapter's ventilation openings (if any) are not blocked to prevent overheating.
- Podmínky prostředí: Operate the device within its specified temperature and humidity ranges. Avoid extreme temperatures and high moisture environments.
- Integrita kabelu: Periodically inspect all connected cables for damage or wear. Replace damaged cables immediately.
6. Řešení problémů
If you encounter issues with your NETWAY3012 adapter, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No power to connected device. |
|
|
| Žádné datové připojení. |
|
|
| Device intermittently loses power/connection. |
|
|
If the problem persists after attempting these solutions, contact Altronix technical support.
7. Specifikace
| Funkce | Detail |
|---|---|
| Model | NETWAY3012 |
| Značka | Altronix |
| Výkon | 12VDC / 30W |
| Zdroj napájení | Corded Electric (requires external 12VDC input) |
| Rozměry (DxŠxV) | 2.52 x 3.82 x 0.98 palce |
| Hmotnost položky | 3.3 libry |
| Certifikace | UL/cUL Listed (UL60950-1) |
| První dostupný termín | 13. srpna 2009 |
8. Informace o záruce
Altronix products are typically covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Altronix webUschovejte si doklad o koupi pro případ reklamace.
9. Technická podpora
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact Altronix technical support directly. Contact information can usually be found on the Altronix official webmístě nebo na obalu produktu.
Altronix Webmísto: www.altronix.com
