1. Konec produktuview
The Moen Renzo 124738CSL Wand Kit is a replacement pull-out spray wand designed for compatible Moen kitchen faucets. This kit provides a functional and aesthetic replacement for a worn or damaged spray wand, restoring full functionality to your kitchen faucet. It features a classic stainless finish and offers multiple spray functions for various kitchen tasks.
2. Bezpečnostní informace
- Před zahájením jakékoli instalace nebo údržby vždy uzavřete hlavní přívod vody do kohoutku.
- Během instalace používejte vhodné osobní ochranné prostředky, například ochranné brýle.
- Ujistěte se, že všechna připojení jsou bezpečná, aby nedošlo k únikům.
- Pokud si nejste jisti některým krokem, poraďte se s kvalifikovaným instalatérem.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Moen Renzo 124738CSL Spray Wand (Classic Stainless)
- Hose connection components (may vary by specific kit)
4. Instalace
Follow these steps to replace your existing pull-out spray wand:
- Vypněte přívod vody: Locate the hot and cold water supply valves under your sink and turn them off completely. Open the faucet handle to relieve any remaining water pressure.
- Disconnect Old Wand: Unscrew the old spray wand from the pull-out hose. This usually involves twisting the wand counter-clockwise. A towel may be useful to catch any residual water.
- Prepare New Wand: Inspect the new Moen Renzo 124738CSL Wand Kit. Ensure any necessary gaskets or O-rings are properly seated on the new wand's connection point.
- Connect New Wand: Carefully screw the new spray wand onto the pull-out hose. Hand-tighten first, then use an adjustable wrench or pliers to gently tighten an additional quarter turn. Avoid over-tightening, which can damage the connection.
- Zkontrolujte, zda se hodí: Some installations may require transferring specific components, such as a black adapter ring, from the original wand to the new one for optimal fit and function. Refer to your original faucet's manual if you encounter fitting issues.
- Obnovení zásobování vodou: Pomalu znovu otevřete ventily přívodu teplé a studené vody.
- Zkouška těsnosti: Turn on the faucet and check all connections for leaks. If leaks are present, tighten the connection slightly until the leak stops.
- Testovací provoz: Verify that the spray wand extends and retracts smoothly and that both spray functions (stream and spray) operate correctly.
This image displays the Moen Renzo 124738CSL Wand Kit, featuring its classic stainless finish and ergonomic design. The wand includes a button for switching between spray patterns.
5. Provoz
The Moen Renzo 124738CSL Wand Kit typically features a button or switch on the spray head to toggle between two spray patterns:
- Provzdušněný proud: Ideální pro plnění hrnců a běžné mytí.
- Silný sprej: Vhodné k oplachování nádobí a čištění dřezu.
Press the button to switch between these modes as needed during use.
6. Údržba
Čištění povrchové úpravy
To maintain the classic stainless finish, clean with a damp cloth and mild liquid dish soap. Rinse thoroughly with warm water and dry with a soft cloth. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
Cleaning Spray Nozzles
Mineral deposits can accumulate in the spray nozzles over time, affecting water flow. To clean, gently rub the rubber nozzles with your finger or a soft brush to dislodge any buildup. For stubborn deposits, a solution of equal parts white vinegar and water can be applied to the nozzles for a few minutes before scrubbing.
7. Řešení problémů
- Nízký průtok vody: Check if the water supply valves are fully open. Inspect the spray wand nozzles for mineral buildup and clean them as described in the Maintenance section.
- Netěsnosti v místě připojení: Ensure the spray wand is securely tightened to the hose. If leaks persist, check for damaged gaskets or O-rings and replace if necessary.
- Nekonzistentní vzor postřiku: Clean the spray nozzles to remove any obstructions.
- Wand Does Not Retract Properly: Check the hose and weight under the sink for any obstructions or tangles that might prevent smooth retraction.
8. Specifikace
| Funkce | Specifikace |
|---|---|
| Výrobce | Moen |
| Číslo dílu | 124738CSL |
| Hmotnost položky | 0.01 unce |
| Rozměry produktu | 12 x 7.5 x 2 palce |
| Barva | Classic Stainless |
| Dokončit | Classic Stainless |
| Materiál | Nerez |
| Způsob instalace | Montáž na palubu s jedním otvorem |
| Počet úchytů | 1 (referring to the faucet it connects to) |
| Typ montáže | Deck Mount (referring to the faucet it connects to) |
9. Záruka a podpora
Moen products are manufactured under the highest standards of quality and workmanship. For specific warranty information, please refer to the warranty documentation included with your original Moen faucet or visit the official Moen website. For technical assistance, replacement parts, or customer support, please contact Moen customer service directly.
Zákaznický servis Moen: Prosím navštivte www.moen.com/customer-support pro kontaktní údaje a další pomoc.
