Mount-It! MI-601

Mount-It! Full-Motion TV Wall Mount Instruction Manual

Model: MI-601

Zavedení

Thank you for choosing the Mount-It! Full-Motion TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 23" to 42" flat screen panels with VESA patterns up to 200x200 and a maximum weight capacity of 66 lbs, this mount offers full articulation for optimal viewing angles. Please read this manual thoroughly before installation and keep it for future reference.

Mount-It! Full-Motion TV Wall Mount

Image: The Mount-It! Full-Motion TV Wall Mount, showcasing its articulating design and VESA plate.

Bezpečnostní informace

VAROVÁNÍ: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or Mount-It! customer support.

  • Neinstalujte tento výrobek na stěny, které nejsou konstrukčně pevné. Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a displeje.
  • This mount is designed for installation into a single wood stud. Do not install into drywall alone.
  • Nepřekračujte maximální nosnost 30 kg (66 liber).
  • Ensure the VESA mounting pattern of your TV is compatible with this mount (75x75mm, 100x100mm, 200x100mm, 200x200mm).
  • Pro zvedání a umisťování televizoru během instalace vždy používejte dvě osoby.
  • Pravidelně kontrolujte všechny spoje a spojovací prvky, abyste se ujistili, že jsou bezpečné.

Obsah balení

Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer support.

  • Sestava nástěnné desky
  • TV Plate Assembly
  • Sada montážního hardwaru (různé šrouby, podložky, distanční podložky pro upevnění televizoru a na zeď)
  • Návod k použití
Labeled diagram of Mount-It! TV mount components

Obrázek: Podrobný view of the mount with key components labeled, including the easy-grip tilt locking knob and removable TV plate.

Nastavení a instalace

Požadované nástroje (nejsou součástí dodávky)

  • Vyhledávač cvočků
  • Tužka
  • Vrtat
  • 5/32" (4mm) Drill Bit (for wood studs)
  • Úroveň
  • Šroubovák s křížovou hlavou
  • Nástrčný klíč nebo nastavitelný klíč

Instalace krok za krokem

  1. Locate a Wood Stud: Use a stud finder to locate the center of a wood stud at your desired mounting height. Mark the center of the stud with a pencil.
  2. Umístění nástěnné desky: Hold the wall plate assembly against the wall, aligning the center hole with your marked stud center. Use a level to ensure the mount is perfectly horizontal. Mark the two mounting holes.
  3. Vrtací pilotní otvory: Using a drill with a 5/32" (4mm) drill bit, drill pilot holes at the marked locations. Drill to a depth of approximately 2.5 inches (65mm).
  4. Připevnění nástěnné desky: Secure the wall plate assembly to the wall using the provided lag bolts and washers. Tighten the bolts firmly with a socket wrench, but do not overtighten.
  5. Attach TV Plate to TV: Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the TV plate assembly to the back of your TV. Ensure the plate is centered and securely fastened.
  6. Montáž televizoru na nástěnnou desku: With assistance, carefully lift the TV with the attached TV plate. Align the TV plate with the wall plate assembly and slide it into place. Ensure the TV plate is securely seated on the wall plate.
  7. Zajištění televizoru k upevnění: Once the TV is on the mount, use the provided security screws or locking mechanism (if applicable) to prevent accidental dislodgement. Refer to the specific diagram in your hardware kit for this step.
Mount-It! TV mount attached to the back of a television

Image: The Mount-It! TV mount securely attached to the back of a flat-screen television, ready for wall installation.

Provoz a seřízení

Your Mount-It! Full-Motion TV Wall Mount allows for various adjustments to achieve the perfect viewúhel.

Nastavení sklonu

The mount allows for a tilt range of up to 30 degrees total (15 degrees up and 15 degrees down). To adjust the tilt, loosen the easy-grip tilt locking knob located on the mount. Adjust the TV to your desired vertical angle, then firmly tighten the knob to secure the position.

Diagram showing 15 degree tilt range of the TV mount

Image: A visual representation demonstrating the 15-degree upward and 15-degree downward tilt capabilities of the mount.

Otočné nastavení

The mount allows for left and right swivel of up to 60 degrees total. Gently push or pull the TV to the desired horizontal angle. The articulating arm will allow smooth movement. No locking mechanism is typically needed for swivel, as the friction holds the position.

Prodloužení a zatažení

The mount can extend your TV up to 6 inches from the wall and retract to a minimum distance of 3.25 inches from the wall. To adjust the distance, gently pull the TV away from the wall or push it back towards the wall. The articulating arm will move smoothly.

Diagram znázorňující vzdálenosti pro vysunutí a zasunutí držáku televizoru

Image: A side-view diagram illustrating how the TV mount extends up to 6 inches from the wall and retracts to 3.25 inches.

Údržba

Pravidelná údržba zajistí dlouhou životnost a bezpečný provoz vašeho nástěnného držáku televizoru.

  • Čištění: K otření držáku použijte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
  • Kontrola upevňovacích prvků: Periodically (e.g., every 6 months) check all screws and bolts to ensure they are tight and secure. Loose fasteners can compromise the mount's stability.
  • Kontrola pohybu: Test the tilt, swivel, and extension movements to ensure they remain smooth. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV.

Odstraňování problémů

If you encounter any issues with your Mount-It! TV wall mount, refer to the following common problems and solutions:

ProblémMožná příčinaŘešení
Mount feels unstable or wobblyLoose wall plate bolts; Incorrect stud installation; Exceeded weight capacity.Ensure lag bolts are securely tightened into a wood stud. Verify TV weight is within 66 lbs limit. Re-install if necessary.
Televizor není vodorovněNástěnná deska není během instalace v rovině.Carefully loosen wall plate bolts slightly, adjust with a level, and re-tighten. Some mounts have a post-installation leveling adjustment; check your specific model.
Difficulty tilting TVTilt locking knob is too tight.Loosen the easy-grip tilt locking knob before attempting to adjust the tilt. Tighten firmly after adjustment.
Mounting screws don't fit TVZvolena nesprávná velikost nebo typ šroubu.Refer to your TV's manual for correct VESA screw size. Use the appropriate screws, washers, and spacers from the provided hardware kit.

Specifikace

FunkceDetail
Číslo modeluMI-601
Kompatibilní velikosti TV23" to 42" (up to some 50" TVs)
Maximální nosnost66 lb (30 kg)
Kompatibilita VESA75x75mm, 100x100mm, 200x100mm, 200x200mm
Úhel náklonuUp to 15° up / 15° down (30° total)
Úhel otočeníUp to 60° left / 60° right (120° total)
Prodloužení od zdi3.25" (zasunutý) až 6" (vysunutý)
MateriálLegovaná ocel
Rozměry produktu9.4 x 4 x 9 palce
Hmotnost položky2.23 libry
VESA compatibility diagram for Mount-It! TV mount

Image: A diagram illustrating the VESA compliant sizes supported by the mount, including 75x75mm, 100x100mm, 200x100mm, and 200x200mm, along with the 66 lbs capacity.

Dimensions of the Mount-It! TV mount

Image: A diagram showing the physical dimensions of the Mount-It! TV mount, including the wall plate and TV plate measurements.

Záruka a zákaznická podpora

Mount-It! products are designed for durability and performance. For warranty information or technical assistance, please contact Mount-It! customer support. Our US-based customer support team is available to assist with any questions or concerns regarding installation or product functionality.

Navštivte oficiální stránky Mount-It! webweb s nejaktuálnějšími zdroji podpory a kontaktními informacemi.

Mount-It! brand image with text 'Why Mount-It! Over 10 Million Users Since 2006'

Image: A graphic highlighting Mount-It!'s brand presence and customer satisfaction, stating 'Over 10 Million Users Since 2006'.

Související dokumenty - MI-601

Předview Montážní manuál pro nástěnný držák na televizi Mount-It! MI-4112 s plným pohybem
Podrobný instalační návod k montáži nástěnného držáku Mount-It! MI-4112 s plným pohybem pro televizi. Obsahuje bezpečnostní pokyny, seznam dílů, rozměry, nosnost a podrobné pokyny k montáži pro dřevěné sloupky a betonové/cihlové stěny.
Předview Návod k instalaci nástěnného držáku televizoru Mount-It! MI-303B
Komplexní pokyny k instalaci nástěnného držáku televizoru Mount-It! MI-303B. Tato příručka zahrnuje vybalení, bezpečnostní opatření, montáž držáků televizoru k televizoru a připevnění nástěnné desky k různým typům stěn (cihlové, betonové, dřevěné sloupky).
Předview Uživatelská příručka pro stolní držák Mount-It! MI-4752 / MI-4752WHT s plným pohybem pro dva monitory
Komplexní uživatelská příručka pro plně pohyblivé stolní držáky Mount-It! MI-4752 a MI-4752WHT pro dva monitory. Obsahuje montážní pokyny, seznam dílů, rozměry, nosnost a návod k nastavení pro optimální nastavení a použití.
Předview MOUNT-IT! MI-402 Návod k instalaci nástěnného držáku na TV s plným pohybem
Comprehensive installation manual for the MOUNT-IT! MI-402 Full Motion TV Wall Mount with Extra Long Extension. Features safety guidelines, a detailed parts list, dimensions, step-by-step assembly instructions for various wall types (wood stud, concrete, brick), VESA bracket configuration, TV attachment, cable management, and adjustment details. Includes contact information for support.
Předview Návod k instalaci nástěnného držáku pro TV s dlouhým výsuvem a plným pohybem (MI-372v3)
Komplexní návod k instalaci držáku na zeď Mount-It! MI-372(v3) s dlouhým výsuvem a plným pohybem na televizi. Obsahuje seznam dílů, podrobný návod k montáži, možnosti montáže na zeď a návod k nastavení.
Předview Výškově nastavitelný držák na TV s krbem - instalační průvodce MI-384
Komplexní instalační návod pro držák TV s nastavitelnou výškou MOUNT-IT! MI-384, který zahrnuje bezpečnostní pokyny, obsah balení, potřebné nářadí a postupnou montáž pro dřevěné sloupky a betonové/cihlové stěny.