1. Úvod
This manual provides essential information for the proper installation, operation, and maintenance of the Robertshaw A12-701 Thermostat. The A12-701 is a genuine OEM replacement part designed for specific applications requiring precise temperature control. Please read this manual thoroughly before attempting any installation or operation.
2. Bezpečnostní informace
VAROVÁNÍ: Failure to follow these safety instructions could result in property damage, personal injury, or death.
- Always disconnect power to the appliance or system before installing, servicing, or removing the thermostat.
- Installation should only be performed by a qualified technician or licensed professional.
- Ujistěte se, že všechna elektroinstalace jsou bezpečná a splňují místní elektrotechnické předpisy.
- Nepoužívejte termostat, pokud se jeví poškozený.
- Udržujte děti v dostatečné vzdálenosti od elektrických součástí.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- Robertshaw A12-701 Thermostat Unit (with capillary tube)
- Ovládací knoflík
- Protective Cover/Housing
- Montážní šrouby (obvykle 2)
Obrázek 1: Rozložené view of the Robertshaw A12-701 Thermostat components, showing the main thermostat unit with its coiled capillary tube, a separate black control knob, a black protective housing, and two small mounting screws.
4. Nastavení a instalace
Installation of the Robertshaw A12-701 Thermostat typically involves replacing an existing thermostat. Due to the nature of electrical and refrigeration components, professional installation is highly recommended.
4.1 Kroky před instalací
- Odpojit napájení: Ensure the power supply to the appliance or system is completely disconnected at the circuit breaker or fuse box.
- Přístup ke starému termostatu: Carefully remove the access panel or cover to expose the existing thermostat.
- Zapojení dokumentů: Before disconnecting any wires, take clear photographs or draw a diagram of the existing wiring connections. Note the color and terminal location of each wire.
- Odstraňte starý termostat: Disconnect the wires and unmount the old thermostat.
4.2 kroky instalace
- Montáž nového termostatu: Position the new Robertshaw A12-701 thermostat unit in the designated mounting location. Secure it using the provided mounting screws.
- Připojení kabeláže: Refer to your documented wiring diagram and connect the wires to the appropriate terminals on the new thermostat. Ensure all connections are tight and secure.
- Poloha kapilární trubice: Carefully route the capillary tube to the sensing area as per the appliance manufacturer's specifications. Avoid kinking or sharply bending the tube. The end of the capillary tube is the temperature sensing element.
- Instalace ochranného krytu: Place the protective cover/housing over the thermostat unit if applicable, ensuring it fits securely.
- Attach Control Knob: Push the control knob onto the thermostat shaft. Ensure it aligns correctly with any indexing marks.
Obrázek 2: Sestaveno view of the Robertshaw A12-701 Thermostat, showing the main unit with its coiled capillary tube, the black control knob attached, and the black protective housing. Two mounting screws are also visible. The knob has markings for "OFF" and "COLDER".
4.3 Kontrola po instalaci
- Obnovit napájení: Once all connections are secure and the thermostat is properly mounted, restore power to the appliance or system.
- Testovací provoz: Turn the control knob to a desired setting and observe if the appliance responds as expected.
5. Návod k obsluze
The Robertshaw A12-701 Thermostat is operated via a rotary control knob. The knob typically features markings such as "OFF" and a range indicating colder settings.
- Zapnutí/vypnutí: Rotate the knob to the "OFF" position to disable the cooling function. Rotate it away from "OFF" to activate the thermostat.
- Nastavení teploty: Rotate the knob towards the "COLDER" indication to decrease the target temperature, or away from it to increase the target temperature. The specific temperature range will depend on the appliance it is installed in.
- Počáteční nastavení: For initial use, set the thermostat to a mid-range setting and allow the appliance to stabilize for several hours before making further adjustments.
6. Údržba
The Robertshaw A12-701 Thermostat is designed for reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.
- Čištění: If necessary, gently wipe the exterior of the thermostat and control knob with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Capillary Tube Inspection: Periodically inspect the capillary tube for any signs of damage, kinks, or dislodgement from its sensing position. Ensure it remains securely in place.
- Elektrické připojení: With power disconnected, occasionally check electrical connections for tightness.
7. Řešení problémů
If the appliance or system controlled by the thermostat is not functioning correctly, consider the following troubleshooting steps:
- Bez napájení:
- Check the circuit breaker or fuse for the appliance.
- Ensure the thermostat control knob is not in the "OFF" position.
- Nesprávná teplota:
- Ověřte nastavení termostatu.
- Ujistěte se, že kapilární trubice je správně umístěna a není poškozená.
- Allow sufficient time for the appliance to reach the set temperature.
- Appliance Runs Continuously or Not at All:
- This may indicate a faulty thermostat or other component. Professional diagnosis is recommended.
Pokud kroky pro řešení potíží problém nevyřeší, obraťte se na kvalifikovaného servisního technika.
8. Specifikace
| Funkce | Detail |
|---|---|
| Výrobce | Robertshaw |
| Číslo dílu | A12-701 |
| Číslo modelu položky | A12-701 |
| Hmotnost položky | 1 liber |
| Rozměry balení | 1 x 1 x 1 palce |
| Položka Množství v balení | 1 |
| Jsou vyžadovány baterie? | Žádný |
9. Informace o záruce
The Robertshaw A12-701 Thermostat is a genuine OEM replacement part. For specific warranty terms and conditions, please refer to the original appliance manufacturer's documentation or contact Robertshaw directly. Typically, OEM parts carry a limited warranty against manufacturing defects.
10. Podpora
For technical assistance, replacement parts, or further inquiries regarding the Robertshaw A12-701 Thermostat, please contact Robertshaw customer support or visit their official website. When contacting support, have your product model number (A12-701) and any relevant appliance information ready.
Poznámka: Robertshaw je registrovaná ochranná známka.
