MENABO BRIO 12173

Uživatelská příručka k střešním nosičům MENABO BRIO 120 cm

For Vehicles with Open Roof Rails

1. Úvod

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your MENABO BRIO 120 cm Roof Bars. Please read this manual thoroughly before installation and retain it for future reference. Proper installation and use are crucial for safety and product longevity.

Two silver MENABO BRIO roof bars with black end caps and locking mechanisms

Image 1.1: MENABO BRIO 120 cm Roof Bars

2. Bezpečnostní informace

VAROVÁNÍ: Nedodržení těchto bezpečnostních pokynů může vést k vážnému zranění nebo poškození majetku.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

Close-up of the end of a silver roof bar showing the black foot, locking mechanism, and rubber end cap

Image 3.1: Detail of Roof Bar End with Locking Mechanism

4. Nastavení a instalace

The MENABO BRIO roof bars are designed for quick and easy assembly on vehicles with open roof rails. No additional tools are required beyond the included Allen spanner.

  1. Identifikujte komponenty: Separate the two roof bars. Note the four carrier feet; two have integrated locks, and two do not.
  2. Attach Carrier Feet: Slide the carrier feet onto the ends of each aluminum bar. Ensure the feet are oriented correctly to grip the open roof rails of your vehicle. The pre-assembled foot design includes protective rubber to prevent damage to your vehicle's roof rails.
  3. Insert Rubber Strips: The included rubber strips serve two purposes: a padding strip at the top protects items from sliding, and a strip at the bottom helps reduce wind noise. Insert these into the designated channels on the top and bottom of the aluminum bars. The top strip protrudes slightly to protect your items.
  4. Pozice na vozidle: Place the assembled roof bars onto your vehicle's open roof rails. Adjust the spacing between the front and rear bars according to the cargo you intend to carry and your vehicle's recommendations. Ensure the bars are parallel to each other.
  5. Secure to Roof Rails: Using the Allen spanner, tighten the clamping mechanism on each carrier foot to firmly secure the roof bars to your vehicle's open roof rails. Ensure a snug fit without over-tightening.
  6. Lock the Bars: Use the provided keys to lock the two carrier feet that have integrated locking mechanisms. This provides security against theft.
  7. Install End Caps: Place the four end caps onto the ends of the aluminum bars.
  8. Závěrečná kontrola: Gently pull and push on each roof bar to confirm it is securely attached and does not move. Re-check all fastenings after driving a short distance (approx. 5-10 km) and before every journey.
Two silver MENABO BRIO roof bars installed on the open roof rails of a dark-colored car

Image 4.1: MENABO BRIO Roof Bars Installed on a Vehicle

5. Návod k obsluze

Once installed, your MENABO BRIO roof bars are ready to transport various types of cargo, such as ski equipment, bicycles, or luggage boxes. Always adhere to the following guidelines:

6. Údržba

Regular maintenance will ensure the longevity and safe operation of your roof bars:

7. Řešení problémů

ProblémMožná příčinaŘešení
Nadměrný hluk větruImproperly seated rubber strips; incorrect bar spacing; cargo not aerodynamic.Ensure rubber strips are fully inserted. Adjust bar spacing. Consider a roof box for cargo.
Roof Bars Feel LooseClamping mechanisms not tightened sufficiently.Znovu utáhněte všechny třamping bolts using the Allen spanner. Check regularly.
Keys Not Working SmoothlyLock mechanism dirty or dry.Naneste malé množství grafitového maziva na válec zámku.
End Caps Falling OffNot fully seated or damaged.Ensure caps are pushed firmly into place. Replace if damaged.

8. Specifikace

9. Záruka a podpora

MENABO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your product or visit the official MENABO website. In case of questions, technical issues, or to order replacement parts, please contact MENABO customer support through their official channels.

Pro další pomoc můžete navštívit MENABO Brand Store on Amazon.

Související dokumenty - BRIO 12173

Předview Menabo MANIA 320 MARATHON 320 Montážní návod a průvodce střešním boxem
Komplexní návod k montáži a instalaci střešního boxu Menabo MANIA 320 MARATHON 320. Obsahuje seznam dílů, kroky montáže, bezpečnostní pokyny a specifikace. Naučte se, jak bezpečně namontovat a používat střešní box Menabo.
Předview Návod k instalaci systému střešních tyčí MENABO TEMA
Komplexní návod k instalaci střešního systému MENABO TEMA, včetně upevňovacích sad pro kryty, sad tyčí a podpůrných sad. Obsahuje schémata a vícejazyčné pokyny.
Předview Menabo Mania, Marathon, Venom 400/460 Průvodce instalací střešního boxu
Komplexní pokyny k instalaci a specifikace pro střešní boxy Menabo Mania, Marathon a Venom 400/460. Naučte se, jak bezpečně upevnit střešní box pomocí T-systému nebo U-Bolt.
Předview Návod k montáži střešního nosiče Menabo Satellite Duo
Komplexní návod pro montáž a instalaci střešního nosiče Menabo Satellite Duo. Obsahuje podrobný seznam dílů, podrobné vizuální pokyny přeložené do textu, rozměry a informace o bezpečném nakládání.
Předview MENABO PROFESSIONAL FIX 603FP Roof Rack Fitting System - Installation Guide
Detailed fitting instructions and parts list for the MENABO PROFESSIONAL FIX 603FP roof rack system. Includes assembly steps, safety guidelines, and load capacities for professional use.
Předview Stojan na kola Menabo Motus: Instalační návod a specifikace
Komplexní instalační návod pro stojan na kola Menabo Motus s podrobným popisem identifikace součástí, kroků montáže, zatížení jízdního kola, specifikací a bezpečnostních opatření.