Zavedení
The Intermatic FF430M is a mechanical, spring-wound timer designed to provide automatic shut-off for various electrical loads. This energy-saving device requires no electricity to operate and is ideal for controlling fans, lights, motors, and heaters. It is designed to replace any standard wall switch, fitting into single or multi-gang boxes, and features an easy 'press-on' knob design for quick installation.
Klíčové vlastnosti
- Mechanický provoz: Requires no electricity to operate, providing energy savings.
- Nastavitelné časování: Offers a timing range from 0 to 30 minutes.
- DPST Contact Form: Double Pole, Single Throw contacts for robust control.
- Všestranná aplikace: Suitable for automatically limiting the 'ON' time of fans, lights, motors, and heaters.
- Snadná instalace: Features 'up front' terminal connections with teeter-type terminals and a 'press-on' knob design.
- Estetický design: Supplied with a molded white time dial plate designed to fit both toggle and decorator style switch plates without field modifications.
- Odolná konstrukce: Rugged time dial plate designed to withstand commercial environments.
- certifikace: UL Listed (E76987) and CSA Certified (Lr3730) for safety and compliance.
Technické specifikace
| Atribut | Hodnota |
|---|---|
| Číslo modelu | FF430M |
| Rozsah časování | 0 až 30 minut |
| Kontaktní formulář | DPST (Double Pole, Single Throw) |
| HP @ 120V | 1 HP |
| HP @ 240V | 2 HP |
| Load Capacity @ 125V | 20A (Inductive) / 7A (Tungsten) |
| Load Capacity @ 250V | 10A |
| Load Capacity @ 277V | 10A |
| Barva čelní desky | Silver / Brushed Metal Finish |
| Materiál | Kov |
| Rozměry produktu (D x Š x V) | 2.3 cm x 2.9 cm x 4.5 cm |
| Hmotnost položky | 0.35 libry (5.6 unce) |
| Typ montáže | Zeď |
| Certifikace | UL Listed (E76987), CSA Certified (Lr3730) |
| UPC | 078275184350 |
Průvodce instalací
Bezpečnost především: Before beginning any installation, ensure that the power to the circuit is turned OFF at the service panel (breaker box or fuse box) to prevent electrical shock.
The FF430M timer is designed to replace a standard wall switch. It can be installed in single or multi-gang electrical boxes. The 'up front' terminal connections and 'press-on' knob design facilitate a quick and easy installation process.
Schémata zapojení
For the FF430M (DPST model), refer to the diagram titled "Example for breaking both sides of a 240 volt load using DPST contacts" or "Example for controlling two loads simultaneously by using DPST contacts" in Figure 3. Ensure all connections are secure using the teeter-type terminals.
- Vypněte napájení jističem.
- Odstraňte stávající nástěnný vypínač.
- Connect the timer's wires to the circuit wires according to the appropriate DPST wiring diagram.
- Secure the timer within the wall box.
- Attach the time dial plate and press on the knob.
- Obnovte napájení na jističi.
Operace
The Intermatic FF430M timer is simple to operate:
- To activate the timer, simply turn the knob clockwise to the desired time setting (up to 30 minutes).
- The timer will automatically count down and turn off the connected load once the set time has elapsed.
- The timer does not have a 'hold' feature; it is designed for automatic shut-off only.
Údržba
The Intermatic FF430M timer requires minimal maintenance. Periodically, you may wipe the faceplate with a soft, damp cloth to remove dust or smudges. Do not use abrasive cleaners or solvents, as these may damage the finish.
Odstraňování problémů
- Timer does not turn on/off: Ensure the power to the circuit is on. Verify all wiring connections are secure and correct according to the installation diagrams.
- Timer knob is stiff or difficult to turn: This is typically not an issue with new units. If it becomes stiff over time, ensure no debris is obstructing the mechanism. Do not force the knob.
- Timer does not complete full cycle: Check the load capacity to ensure it does not exceed the timer's specifications. Overloading can affect performance.
If issues persist after checking these points, please contact customer support.
Informace o záruce
The Intermatic FF430M Spring Wound Timer is covered by a 1letá omezená záruka. During this period, if the unit fails due to manufacturing defects, it will be replaced. Please retain your proof of purchase for warranty claims.
Zákaznická podpora
For technical assistance, troubleshooting beyond the scope of this manual, or warranty inquiries, please contact Intermatic customer support. Detailed contact information can typically be found on the official Intermatic webmístě nebo na obalu produktu.
