Zavedení
The Mount-It! ML1 Ultra Slim Wall Mount is designed to provide a sleek, low-profile mounting solution for your LED television. This mount allows your TV to sit exceptionally close to the wall, mimicking the appearance of a picture frame. It is an alternative solution for Samsung LED TVs ranging from 40 to 55 inches, supporting VESA 400x400 standard flat screen TVs up to 100 lbs. With a depth of less than 15mm (0.57 inches) from the wall, it offers one of the slimmest mounting profiles available. The design incorporates high-quality mounting hardware and a convenient "kick-stand" lever for easy cable access.
Obsah balení
Please verify that all components listed below are present before beginning installation. If any parts are missing or damaged, please contact Mount-It! customer support.
Image: All components included with the Mount-It! ML1 Ultra Slim Wall Mount. This includes two large silver wall discs, two black TV brackets with integrated wires, one metal kick-stand, various black and silver screws, washers, and wall anchors.
- 2 x Wall Mounting Discs (Silver, circular)
- 2 x TV Mounting Brackets (Black, with integrated hanging wires)
- 1 x Kick-Stand Lever (Metal, U-shaped)
- Set of M8 Screws for TV attachment
- Various Washers and Spacers
- Wall Anchors and Screws for wall attachment
Nastavení a instalace
Proper installation is crucial for the safety and stability of your television. It is recommended to have a second person assist with lifting the TV during the final steps. Ensure you have a drill, level, and stud finder available.
- Připravte televizor: Before mounting, connect all necessary cables (HDMI, power, etc.) to your TV. Accessing the back of the TV can be difficult once mounted due to the ultra-slim profile.
- Připevnění držáků televizoru: Secure the black TV mounting brackets to the back of your television using the provided M8 screws and appropriate washers/spacers. Ensure the hanging wires are correctly positioned and secured.
- Determine Wall Mounting Location: Identify the desired height and center point for your TV on the wall. Use a stud finder to locate wall studs. For optimal security, it is highly recommended to mount the wall discs directly into wall studs. If mounting into drywall without studs, consider using heavy-duty drywall anchors (not always included, and may require separate purchase for enhanced security).
- Install Wall Mounting Discs: Mark the positions for the two silver wall mounting discs. Drill pilot holes and securely fasten the discs to the wall using the provided screws and anchors. Use a level to ensure the discs are perfectly aligned horizontally.
- Zavěste televizi: With assistance, carefully lift the television and align the hanging wires from the TV brackets with the wall mounting discs. Gently lower the TV, allowing the wires to engage with the discs, effectively hanging the TV like a picture frame.
- Secure the TV (Optional but Recommended): Some TVs may include an additional anchor point for added security. If available, utilize this feature to further secure the bottom of the TV to the wall.
Návod k obsluze
The Mount-It! ML1 features a unique "kick-stand" lever designed to facilitate access to the TV's rear ports.
- Using the Kick-Stand: To access cables or ports on the back of your mounted TV, gently pull the bottom of the TV away from the wall. Insert the metal kick-stand lever into the designated slot on the TV bracket. This will prop the TV slightly forward, providing space to reach connections.
- Removing the Kick-Stand: Once you have finished accessing the cables, remove the kick-stand lever and gently push the TV back against the wall until it rests flush.
Údržba
Pravidelná údržba zajistí dlouhou životnost a bezpečnost vašeho nástěnného držáku.
- Čištění: Use a soft, dry cloth to wipe down the mount components. Avoid abrasive cleaners or solvents.
- Pravidelné kontroly: Periodically inspect all screws and connections to ensure they remain tight and secure. Check for any signs of wear or damage to the hanging wires or brackets.
Odstraňování problémů
- TV není vodorovně: Re-check the horizontal alignment of the wall mounting discs using a level. Adjust as necessary. Ensure the TV brackets are securely and evenly attached to the TV.
- Difficulty Hanging TV: Ensure the hanging wires are fully extended and properly aligned with the wall discs. Verify that the TV's weight and VESA pattern are within the mount's specifications.
- Mount Does Not Fit TV: Confirm your TV's VESA mounting pattern (distance between screw holes on the back of the TV) is 400x400mm. This mount is specifically designed for this standard and for Samsung LED TVs between 40-55 inches.
- Limited Cable Access: Utilize the integrated kick-stand feature as described in the Operating Instructions section. If cables were not connected prior to mounting, this feature will provide temporary access.
Specifikace
| Funkce | Detail |
|---|---|
| Rozměry produktu | 8.8 x 1.9 x 6.9 palce |
| Hmotnost položky | 1.19 libry |
| Číslo modelu položky | ML1 |
| Typ montáže | Držák na zeď |
| Typ pohybu | Tilt (via kick-stand) |
| Značka | Mount-It! |
| Materiál | Legovaná ocel, hliník |
| Maximální kompatibilní velikost | 55 Inches (Supports 40", 42", 46", 55" Samsung LED models) |
| Minimální kompatibilní velikost | 40 palce |
| Barva | Černá, Stříbrná |
| Kompatibilní zařízení | Televize |
| Kompatibilita VESA | 400x400 standard |
| Hmotnostní kapacita | Až 100 liber |
| Vzdálenost od zdi | 14.5 mm (0.57 palce) |
| UPC | 797734393668 |
Záruka a podpora
For any questions, technical assistance, or warranty inquiries regarding your Mount-It! ML1 Ultra Slim Wall Mount, please contact Mount-It! customer support. Refer to the product packaging or the official Mount-It! webstránky s nejaktuálnějšími kontaktními informacemi.
Note: This product is manufactured by Mount World and is an alternative to the Samsung WMN1000B.
