Zavedení
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Marley EFF1500 Qmark Electric Ceiling Mounted Heater. This high-output commercial heater is designed for areas requiring heat where wall space is not available, such as commercial, industrial, or institutional settings. Please read this manual thoroughly before installation or use.
Bezpečnostní informace
WARNING: To reduce the risk of fire, electric shock, or injury, read and understand all instructions before installing or using this heater.
- Always disconnect power at the main service panel before installing or servicing this heater.
- Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
- Do not install this heater in areas where flammable vapors or liquids are present.
- Zajistěte správné uzemnění, abyste zabránili úrazu elektrickým proudem.
- Keep combustible materials at least 3 feet (0.9 meters) away from the front of the heater.
- Neblokujte vstupy nebo výstupy vzduchu.
- The front cover is heavy-duty stamped steel with 1/4" mesh backing the louvers to prevent the insertion of foreign objects. Do not attempt to bypass this safety feature.
Nastavení a instalace
The Marley EFF1500 heater is designed for ceiling mount installation. Due to its weight and electrical requirements, professional installation is recommended.
Vybalování
Carefully remove the heater from its packaging. Inspect for any shipping damage. Report any damage to your supplier immediately.
Místo montáže
- Choose a location that allows for proper air circulation and is away from obstructions.
- Ensure the mounting surface can support the heater's weight (approximately 23 pounds).
- Maintain required clearances from walls and ceilings as per local codes.
Elektrické připojení
Tento ohřívač pracuje na 120 voltech a odebírá 12.5 Amps, s vodoutage of 1500 watts. A dedicated circuit is highly recommended for optimal performance and safety.
- Turn off power at the circuit breaker before beginning any wiring.
- Route appropriate gauge wiring to the heater's junction box.
- Connect the power supply wires to the heater's terminals as per the wiring diagram located inside the unit's access panel. Ensure all connections are secure.
- Secure the heater to the ceiling structure using appropriate fasteners. The entire heat and fan assembly can be easily removed to facilitate mounting the housing.
- Once the housing is mounted, re-install the heat/fan unit.
Figure 1: Marley EFF1500 Qmark Electric Ceiling Mounted Heater. This image shows the white rectangular heater with a slatted grille, designed for ceiling installation. The metal housing is visible above the white grille.
Návod k obsluze
The Marley EFF1500 heater features an automatic fan delay for comfortable operation.
Turning On the Heater
Once properly installed and wired, turn on the power at the circuit breaker. The heater is typically controlled by a wall-mounted thermostat (not included) or a dedicated switch.
Automatické zpoždění ventilátoru
A fan delay is standard on all units. This feature prevents the unit from discharging cold air before the heating element warms up. When the heater is activated, the heating element will begin to warm, and the fan will engage automatically after a short delay (typically a minute or so) once sufficient heat is generated. This ensures that only warm air is circulated into the room.
Nastavení tepelného výkonu
The heater has 3 fan speeds. Heat output is controlled by the external thermostat or control switch connected to the unit. Adjust the thermostat to your desired temperature setting. The heater will cycle on and off to maintain the set temperature.
Údržba
Regular maintenance ensures the longevity and efficient operation of your heater. Always disconnect power before performing any maintenance.
Čištění
- Pravidelně čistěte vnější povrch ohřívače měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Ensure the air intake and exhaust grilles are free from dust and debris. A vacuum cleaner with a brush attachment can be used to gently clean the grilles.
Roční kontrola
It is recommended to have a qualified technician inspect the heater annually to check electrical connections, heating elements, and fan operation.
Odstraňování problémů
Než kontaktujete zákaznickou podporu, znovuview následující běžné problémy a jejich řešení.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ohřívač se nezapne. | No power to the unit; tripped circuit breaker; faulty thermostat. | Check circuit breaker and reset if tripped. Ensure power is supplied to the unit. Verify thermostat settings and functionality. |
| Ventilátor běží, ale netopí. | Heating element failure; thermal cutout activated. | Turn off power, wait 10 minutes, then restore power. If problem persists, contact a qualified technician. |
| Topení se příliš často zapíná a vypíná. | Thermostat set too high; improper sizing for room; obstructed airflow. | Adjust thermostat to a lower setting. Ensure proper airflow around the unit. Consult with an HVAC professional for sizing concerns. |
| Unusual noise from heater. | Loose components; fan motor issue; debris in fan. | Disconnect power and inspect for loose parts or debris. If noise persists, contact a qualified technician. Note: A slight fan noise (around 45-50 decibels) is normal for this type of unit. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | EFF1500 |
| Značka | Marley |
| Typ | Electric Ceiling Mounted Heater |
| Wattage | 1500 wattů |
| svtage | 120 voltů |
| Ampvymazat | 12.5 Amps |
| Rozměry (D x Š x V) | 19.13 x 15.75 x 4.75 palce |
| Hmotnost položky | 23 libry |
| Typ montáže | Stropní držák |
| Speciální funkce | Automatické zpoždění ventilátoru |
| Počet rychlostí | 3 |
| Země původu | Spojené státy |
Záruka a podpora
Informace o záruce
For specific warranty details regarding your Marley EFF1500 heater, please refer to the warranty card included with your product packaging or visit the official Marley webUschovejte si účtenku jako doklad o koupi pro případ reklamace.
Zákaznická podpora
If you require further assistance, have questions not covered in this manual, or need to report a problem, please contact Marley customer support. Contact information can typically be found on the manufacturer's webmístě nebo na obalu produktu.
Pro více informací můžete navštívit Obchod Marley na Amazonu.
