Zavedení
Thank you for choosing the Streamlight Stinger 75783 HP LED Flashlight. This high-performance, rechargeable flashlight is designed for durability and optimal illumination in various conditions. It features a robust anodized aluminum construction, a comfortable non-slip rubber grip, and a deep parabolic reflector for a powerful, long-range beam with excellent peripheral light.
This manual provides essential information for the proper setup, operation, and maintenance of your Stinger HP LED Flashlight to ensure its longevity and performance.
Obrázek: Úhlový view of the Streamlight Stinger 75783 HP LED Flashlight, showcasing its sleek black design and textured grip.
Nastavení a nabíjení
The Streamlight Stinger 75783 HP LED Flashlight comes with a 120V AC Piggyback Charger. Ensure the flashlight is fully charged before its first use to maximize battery life and performance.
- Rozbalení: Carefully remove all components from the packaging. Verify that the flashlight, 120V AC Piggyback Charger, and any included accessories are present.
- Umístění nabíječky: Select a dry, stable location for the charger. Plug the 120V AC charger into a standard wall outlet.
- Počáteční nabíjení: Insert the flashlight into the charging cradle. Ensure it is securely seated. The charging indicator light on the charger will illuminate, typically red, to indicate charging is in progress.
- Plné nabití: Allow the flashlight to charge for approximately 10-12 hours for the initial charge. Subsequent charges typically take less time, depending on battery depletion. The indicator light will change color (e.g., green) or turn off when fully charged, depending on the charger model.
- Battery Installation (if replacing): The flashlight includes a rechargeable battery. If replacing, ensure the battery is inserted with the correct polarity as indicated inside the battery compartment.
Obrázek: Boční view of the Streamlight Stinger 75783 HP LED Flashlight, highlighting the power button and ribbed grip.
Operace
The Stinger HP LED Flashlight features a multi-function push-button switch for easy mode selection.
- Zapnutí/vypnutí: Press the push-button switch once to turn the flashlight on. Press again to turn it off.
- Výběr režimu: From the ON position, rapidly press the switch to cycle through the different output modes:
- Vysoký: Maximum brightness for intense illumination.
- Střední: Balanced brightness for general use and extended run time.
- Nízký: Reduced brightness for close-up work or when minimal light is needed, conserving battery.
- Funkce stroboskopu: To activate the strobe mode, rapidly double-press the switch from any ON mode. Press once more to return to the previous steady mode.
- Vlastnosti paprsku: The deep parabolic reflector is engineered to produce a concentrated, long-range targeting beam while also providing optimal peripheral illumination, allowing for a wide field of view.
Image: Diagram illustrating the High Performance (HP) beam pattern, showing a focused central beam with wide peripheral spill.
Image: A man using the Streamlight Stinger flashlight to illuminate and inspect intricate components of an engine, demonstrating its utility in detailed work.
Údržba
Proper maintenance will ensure the longevity and optimal performance of your Streamlight Stinger HP LED Flashlight.
- Čištění: Očistěte tělo svítilny měkkým hadříkemamp cloth. Avoid abrasive cleaners or solvents that could damage the anodized finish or rubber grip.
- Péče o čočky: The unbreakable polycarbonate lens has an anti-scratch coating. Clean the lens gently with a clean, soft cloth. For stubborn smudges, a small amount of lens cleaner designed for optics can be used. Do not use harsh chemicals.
- O-kroužky: The flashlight is O-ring sealed for water resistance. Periodically inspect the O-rings for any signs of wear or damage. If necessary, apply a thin coat of silicone grease to keep them pliable and maintain the seal. Replace damaged O-rings promptly.
- Péče o baterie:
- Always use the provided 120V AC Piggyback Charger.
- Do not overcharge the battery. Once fully charged, remove the flashlight from the charger if not needed for immediate use.
- If storing the flashlight for an extended period, ensure the battery is partially charged (around 50%) and recharge it every few months to prevent deep discharge.
- Skladování: Uchovávejte svítilnu na chladném a suchém místě mimo přímé sluneční světlo a extrémní teploty.
Odstraňování problémů
If you encounter issues with your Streamlight Stinger HP LED Flashlight, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Svítilna se nezapne. | Baterie je vybitá nebo není správně nainstalována. | Charge the battery fully. Ensure the battery is correctly inserted with proper polarity. |
| Světlo je tlumené nebo bliká. | Low battery charge or loose connections. | Recharge the battery. Check the battery cap and ensure it is tightened securely. |
| Charger indicator light not illuminating. | Charger not plugged in, faulty outlet, or poor contact with flashlight. | Verify the charger is securely plugged into a working outlet. Ensure the flashlight is properly seated in the charging cradle. |
| Vnikání vody. | Poškozené nebo nesprávně usazené O-kroužky. | Inspect O-rings for damage or debris. Clean and lubricate O-rings, or replace if damaged. Ensure all caps are tightly sealed. |
If the problem persists after attempting these solutions, please contact Streamlight customer support for further assistance.
Specifikace
Detailed specifications for the Streamlight Stinger 75783 HP LED Flashlight:
| Funkce | Detail |
|---|---|
| Značka | Streamlight |
| Číslo modelu | 75783 |
| Barva | Černý |
| Zdroj napájení | Napájení z baterie (dobíjecí) |
| svtage | 14.4 V (DC) |
| Hmotnost | 386 g (13.6 oz) |
| Stavební materiál | Anodized Aluminum with Non-slip Rubber Grip |
| Materiál čočky | Unbreakable Polycarbonate with Anti-scratch Coating |
| Utěsnění | O-kroužek utěsněn |
| Typ nabíječky | 120V AC Piggyback Charger |
Performance Specifications (FL1 Standard)
Image: Table detailing the FL1 Standard performance metrics for High, Medium, and Low modes, including Lumens, Run Time, Beam Distance, and Candela.
| Režim | Lumeny | Doba běhu | Vzdálenost paprsku | Peak Beam Intensity (Candela) |
|---|---|---|---|---|
| Vysoký | 350 | 2 hodin | 473 metrů | 56,000 cd |
| Střední | 175 | 3 hodiny 45 minut | 335 metrů | 28,000 cd |
| Nízký | 85 | 7 hodiny 15 minut | 237 metrů | 14,000 cd |
Záruka a podpora
Streamlight products are known for their quality and durability. For specific warranty information regarding your Stinger 75783 HP LED Flashlight, please refer to the warranty card included with your product or visit the official Streamlight webmísto.
For technical support, service, or to inquire about replacement parts, please contact Streamlight Customer Service directly. Contact information can typically be found on the Streamlight webmístě nebo na obalu produktu.
Note: Information regarding spare parts availability is not provided in this manual. Please contact the manufacturer for details.
