APC Smart-UPS 750VA (SMT750) Instruction Manual

1. Úvod a konecview

The APC Smart-UPS 750VA (SMT750) is an Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for your electronic devices. Featuring pure sine wave output, it ensures compatibility with active PFC power supplies and sensitive electronics. This 120V unit offers 750VA / 500W capacity, safeguarding your equipment against power disruptions and ensuring continuous operation during power outages.

2. Vlastnosti produktu

• Záložní baterie 750VA / 500W: Poskytuje nezbytnou energii běhemtages to protect connected equipment.
• Výstup čisté sinusové vlny: Ensures the highest degree of compatibility with active Power Factor Correction (PFC) power supplies and sensitive electronics, delivering clean and stable power.
• 6 Battery Backup and Surge Protector Outlets: Offers comprehensive protection for multiple devices.
• Smart UPS with LCD Display: Provides real-time status updates and configuration options directly on the unit.
• Network-Grade Power Conditioning: Protects from damaging surges and disruptive noise.
• Solid State Automatic Voltage Regulace (AVR): Boosts low input voltage and trims high voltage without relying on battery operation, preserving battery life.
• Spravovatelné v síti: Connectivity via serial, USB, or optional Ethernet for remote monitoring and management.
• Line Interactive Topology: Efficient and reliable power protection.
• Note: This SMT750 model is not sold in Vermont.

3. Pokyny k nastavení

Follow these steps to set up your APC Smart-UPS SMT750 for optimal performance.

1. Vybalte UPS: Carefully remove the UPS and all accessories from its packaging. Inspect for any shipping damage.
2. Připojte baterii: The UPS is shipped with the battery disconnected for safety. Locate the battery connector on the rear panel. Remove the protective cap from the battery connector. Connect the battery cable to the battery connector. Ensure a secure connection.
3. Connect Equipment to UPS Outlets: Plug your critical electronic devices (computers, monitors, network equipment) into the 'Battery Backup + Surge' outlets. For devices that only require surge protection (e.g., printers, scanners), use the 'Surge Only' outlets.
4. Připojení k síťovému napájení: Plug the UPS power cord into a grounded 120V AC wall outlet.
5. Počáteční poplatek: Allow the UPS to charge for at least 24 hours before initial use to ensure maximum runtime capacity. The LCD display will indicate the battery charge level.
6. Turn On the UPS: Press the power button on the front panel to turn on the UPS. The LCD display will illuminate, showing the current status.

4. Návod k obsluze

Once set up, your APC Smart-UPS SMT750 operates largely automatically. The LCD display provides crucial information and allows for basic configuration.

• Normální provoz: When utility power is present, the UPS charges its battery and provides surge-protected power to connected devices. The LCD will show 'On Line' status.
• Provoz na baterie: Během výkonu outage, the UPS automatically switches to battery power, providing uninterrupted power to connected devices. An audible alarm may sound, and the LCD will indicate 'On Battery' status and estimated runtime.
• LCD displej: Use the display buttons to cycle through various information screens, including input/output voltage, zatížení procenttage, battery charge level, and estimated runtime.
• Správa sítě: For advanced monitoring and management, connect the UPS to your network via the USB or serial port, or an optional Ethernet card. Install the PowerChute software (available from APC) on your computer for detailed control and graceful shutdown capabilities.
• Ochrana proti přetížení: If the UPS is overloaded, it will sound an alarm and may shut down. Reduce the load by unplugging non-essential devices and press the 'Overload Protector' button on the rear panel to reset.

5. Údržba

Pravidelná údržba zajišťuje dlouhou životnost a spolehlivost vašeho UPS.

• Výměna baterie: The internal 12V lead-acid battery has a finite lifespan. When the battery needs replacement, the UPS will indicate this on the LCD. Refer to the APC website or contact support for compatible replacement battery cartridges (RBCs). Battery replacement is typically user-serviceable.
• Čištění: Keep the UPS clean and free of dust. Use a dry cloth to wipe down the exterior. Ensure ventilation openings are not obstructed.
• Podmínky prostředí: Operate the UPS within recommended temperature and humidity ranges to maximize battery life and overall performance.

6. Řešení problémů

Tato část se zabývá běžnými problémy, se kterými se můžete setkat u vaší UPS.

• UPS se nezapíná: Ensure the battery is properly connected and the UPS is plugged into a live wall outlet. Check the circuit breaker on the rear panel.
• Krátká doba běhu: The battery may not be fully charged, or it may be nearing the end of its service life. Allow for a full 24-hour charge or consider battery replacement.
• Neustálé pípání: To obvykle znamená, že UPS pracuje na baterii kvůli výpadku proudu ze sítě.tage or a low battery condition. Check your utility power.
• Indikace přetížení: If the UPS displays an overload warning, disconnect non-essential equipment from the battery backup outlets and press the overload protector reset button.
• Žádné napájení do zásuvek: Verify the UPS is turned on and receiving utility power. Check if the outlets are 'Battery Backup + Surge' or 'Surge Only'.

7. Specifikace

8. Záruka a podpora

For detailed warranty information, product registration, and technical support, please visit the official APC by Schneider Electric webnebo se obraťte na jejich zákaznický servis. Uschovejte si doklad o koupi pro případ reklamace.