Wayne CWS100

Uživatelská příručka k převodovce studniční pumpy Wayne CWS100

Model: CWS100 | 1 HP

Konec produktuview

The Wayne CWS100 1-horsepower shallow well jet pump is designed for wells up to 90-feet deep. It is capable of pumping up to 560 gallons per hour at a 5-foot depth when operating at 50 PSI. This pump is built with a durable cast iron volute and features a dedicated priming port for easy filling.

Wayne CWS100 Convertible Well Pump

Image: The Wayne CWS100 Convertible Well Pump, showcasing its black cast iron body and motor assembly.

Klíčové vlastnosti

Pokyny pro nastavení

Proper installation is crucial for the optimal performance and longevity of your Wayne CWS100 pump. Ensure all local plumbing and electrical codes are followed. The pump is designed for shallow well applications up to 90 feet deep.

1. Site Selection and Mounting

Choose a dry, well-ventilated location as close to the well as possible. Mount the pump on a solid, level surface to minimize vibration and noise. Use appropriate bolts to secure the pump base.

2. Instalatérské připojení

Connect the suction line (1-1/4 inch NPT) from the well to the pump's suction port. Connect the discharge line (3/4 inch NPT) from the pump to your household plumbing system. Ensure all connections are watertight using thread sealant. Consider increasing suction plumbing diameter or decreasing pipe friction for improved performance.

3. Elektrické zapojení

The pump is factory-set for 240V operation. If 120V operation is desired, consult the wiring diagram provided in the full user manual for proper conversion. Connect the pump to a dedicated, properly grounded electrical circuit with appropriate overcurrent protection. All electrical work should be performed by a qualified electrician.

4. Naplnění čerpadla

Before initial operation, the pump must be primed. Remove the priming plug from the dedicated priming port on the volute. Fill the pump casing and suction line completely with water until it overflows. Replace the priming plug securely. This step is critical for jet pump operation.

Návod k obsluze

Once properly installed and primed, the Wayne CWS100 pump operates automatically based on system pressure.

1. První spuštění

After priming, restore power to the pump. The pump will start and build pressure. The pressure switch is pre-set to turn the pump on at 30 PSI and off at 50 PSI. Allow the pump to run until it reaches the cut-off pressure and shuts off automatically.

2. Normální provoz

The pump will cycle on and off as water is used and system pressure drops below the cut-in setting. Ensure there are no leaks in the plumbing system, as this can cause the pump to short cycle (turn on and off frequently).

3. Vypínání

For temporary shutdown, simply turn off the power to the pump at the circuit breaker. For extended periods of non-use, especially in freezing temperatures, drain the pump and plumbing lines completely to prevent damage.

Údržba

Regular maintenance helps ensure the longevity and efficient operation of your well pump.

Odstraňování problémů

This section provides basic troubleshooting steps for common issues. For more complex problems, consult a qualified professional or refer to the complete user manual.

ProblémMožná příčinaŘešení
Pump runs but no water or low pressureLoss of prime, air leak in suction line, low well water level, clogged impeller.Re-prime the pump. Check all suction line connections for leaks. Verify well water level. Inspect and clean impeller if accessible.
Pump short cycles (turns on/off frequently)Waterlogged pressure tank, air leak in system, pressure switch malfunction.Check pressure tank air charge. Inspect plumbing for leaks. Consult a technician for pressure switch issues.
Čerpadlo se nespustíNo power, tripped circuit breaker, faulty motor, seized pump.Check power supply and circuit breaker. Consult a qualified electrician or pump technician.

Specifikace

AtributDetail
ZnačkaWayne
Číslo modeluCWS100
Koňská síla1 HP
Maximální průtok588 gallons per hour (at 50 PSI)
Maximální výška zdvihuAž 90 stop
svtage120V/240V (dvojitý režim hlasitosti)tage, factory set for 240V)
Velikost výboje3/4 palce NPT
Velikost sání1-1/4 palce NPT
Velikost disku1 palců
Nastavení tlakového spínače30-50 PSI (pre-set)
MateriálLitina
Hmotnost položky40 libry
Rozměry produktu14 x 9 x 8.75 palce
UPC040066105974

Informace o záruce

The Wayne CWS100 Convertible Well Pump comes with a 3letá omezená záruka covering parts only. For specific terms and conditions, please refer to the official warranty documentation included with your product or contact Wayne customer support.

Podpora a další informace

For detailed diagrams, advanced troubleshooting, or to purchase replacement parts, please refer to the complete user manual available as a PDF document. You can often find this on the manufacturer's official webwebu nebo prostřednictvím prodejce, u kterého jste produkt zakoupili.

For direct support, you may visit the official Wayne store or contact their customer service department.
Visit the Wayne Store on Amazon

K dispozici je také ke stažení uživatelská příručka ve formátu PDF: Stáhnout uživatelskou příručku (PDF)

Související dokumenty - CWS100

Předview Vodní systémy s přestavitelným proudovým čerpadlem WAYNE řady CWS: Návod k obsluze a návod k obsluze náhradních dílů
Komplexní návod k obsluze, návod k obsluze dílů a instalační příručka pro systémy vodních čerpadel WAYNE řady CWS s přestavitelnými studničními tryskami. Zahrnuje specifikace, bezpečnost, instalaci, provoz, údržbu a řešení problémů.
Předview Přenosný zavlažovač trávníku a víceúčelové čerpadlo WAYNE PLS100: Návod k obsluze a manuál
Komplexní návod k obsluze, instalační příručka, údržba a řešení problémů pro přenosný zavlažovač trávníku a víceúčelové čerpadlo WAYNE PLS100. Obsahuje specifikace, údaje o výkonu, bezpečnostní varování a informace o omezené záruce.
Předview Návod k instalaci a záruka na ponorný systém Wayne
Komplexní instalační průvodce a informace o záruce pro ponorné jímky Wayne, včetně provozu primárního a záložního čerpadla, vybalení a specifikací produktu.
Předview Ponorná kalová čerpadla Wayne: Instalační, provozní a údržbářská příručka
Komplexní instalační manuál pro ponorná čerpadla Wayne, který zahrnuje informace o provozu, bezpečnosti, řešení problémů a omezené záruce. Zahrnuje specifikace a výkonnostní údaje pro různé modely.
Předview Ponorná kalová čerpadla Wayne: Instalační, provozní a dílní příručka
Komplexní průvodce instalací, provozem, řešením problémů a zárukou pro ponorná čerpadla Wayne, včetně specifikací, údajů o výkonu a pokynů k údržbě.
Předview Ponorné kalové čerpadlo Wayne - návod k obsluze a manuál k dílům
Tato příručka obsahuje provozní pokyny, pokyny pro řešení problémů a seznamy dílů pro ponorná kalová čerpadla Wayne, včetně modelů FLS790, FLS800, SPF33, SPF50, SSCDU800, SSPF50, CDU790, CDU790HH, CDU800 a CDU980. Zahrnuje instalaci, provoz, údržbu, bezpečnostní opatření a informace o záruce.