1. Úvod
The Trimble Recon is a rugged handheld computer designed for outdoor and demanding environments. It features a 200MHz processor, 64MB RAM, 128MB Flash Memory, and a 4000 mAh battery, all operating on Microsoft Windows Mobile 6. Its sunlight-readable VGA display ensures visibility in various lighting conditions. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Trimble Recon device.
Figure 1: Trimble Recon Handheld Computers. This image displays five Trimble Recon devices, showcasing their robust design and form factor, suitable for field use.
2. Průvodce nastavením
2.1 Vybalení a počáteční kontrola
Upon receiving your Trimble Recon, carefully unpack all components and inspect for any signs of damage. The complete factory kit includes:
- Trimble Recon PDA unit
- Nabíjecí baterie
- USB kabel
- Napájecí kabel (síťový adaptér)
- Řemínek na ruku
- CD se softwarem
- Various Accessories/Adapters
- Průvodce pro začátečníky
2.2 Instalace a nabíjení baterie
- Před instalací baterie se ujistěte, že je zařízení vypnuté.
- Vyhledejte přihrádku na baterii na zadní straně zařízení.
- Insert the 4000 mAh battery, ensuring proper alignment of the contacts.
- Zajistěte kryt přihrádky na baterie.
- Connect the power cable to the device and plug the AC adapter into a power outlet.
- Allow the device to charge fully before first use. A full charge typically takes several hours.
2.3 Zapnutí/vypnutí
- Zapnutí: Press and hold the power button (usually marked with a circle and a vertical line) until the screen illuminates.
- Vypnutí: Press and hold the power button until the power-off options appear on the screen, then select "Power Off" or "Shut Down". Alternatively, a quick press may put the device into sleep mode.
3. Návod k obsluze
3.1 Navigating Windows Mobile 6
The Trimble Recon operates on Microsoft Windows Mobile 6. Navigation is primarily done via the touchscreen using the included stylus or your finger, and through the physical navigation buttons.
- Použití stylusu: Tap the screen to select items, double-tap to open applications, and drag to scroll.
- Navigační podložka: Use the directional pad (up, down, left, right) to move through menus and options.
- Tlačítko OK/Enter: Potvrzuje výběr.
- Softwarová tlačítka: The buttons directly below the screen often correspond to on-screen labels for specific functions.
3.2 Connecting to a Computer (Syncing Data)
To transfer data between your Trimble Recon and a computer, use the provided USB cable.
- Install the necessary synchronization software (e.g., Microsoft ActiveSync for Windows XP/2000 or Windows Mobile Device Center for Windows Vista/7/8/10) from the included CD or Trimble's official webstránky do vašeho počítače.
- Connect one end of the USB cable to the Trimble Recon and the other end to an available USB port on your computer.
- The synchronization software should automatically detect the device and initiate a partnership or allow for file procházení.
3.3 Používání aplikací
The Trimble Recon comes pre-loaded with standard Windows Mobile applications. Additional applications can be installed as needed.
- Access applications via the "Start" menu (usually located at the top-left of the screen).
- Tap on an application icon to launch it.
- Refer to specific application documentation for detailed usage instructions.
4. Údržba
4.1 Čištění zařízení
- Použijte měkký hadřík, který nepouští vlákna dampened with water or a mild, non-abrasive cleaning solution to clean the screen and casing.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the device's display or finish.
- Ensure all ports are free of dust and debris. Use compressed air if necessary, but do so carefully.
4.2 Péče o baterii
- Chcete-li maximalizovat životnost baterie, vyhněte se častému úplnému vybíjení.
- Pokud zařízení delší dobu nepoužíváte, skladujte jej na chladném a suchém místě.
- If storing for a long time, charge the battery to approximately 50% before storage.
4.3 Aktualizace softwaru
Periodically check Trimble's official website for any available software or firmware updates for your Recon device. Keeping the software updated can improve performance and address potential issues.
5. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Zařízení se nezapne. | Low or depleted battery; battery not properly seated. | Plně nabijte baterii. Ujistěte se, že je baterie správně vložena. |
| Obrazovka nereaguje. | Software glitch; screen calibration issue. | Perform a soft reset (refer to starter guide for specific button combination). Recalibrate the screen if the issue persists after reset. |
| Nelze se připojit k počítači. | Incorrect USB cable; driver issues; synchronization software not running. | Ensure you are using the correct USB cable. Reinstall synchronization software and drivers on your computer. Check USB port functionality. |
| Device runs slowly or freezes. | Too many applications running; low memory; software conflict. | Close unnecessary applications. Perform a soft reset. If issues persist, consider a hard reset (data will be lost, back up first). |
6. Specifikace
| Funkce | Detail |
|---|---|
| Procesor | 200 MHz |
| BERAN | 64 MB |
| Flash paměť | 128 MB |
| Operační systém | Microsoft Windows Mobile 6 |
| Zobrazit | Sunlight Readable VGA Display |
| Baterie | 4000 XNUMX mAh |
| Barva | Žluť |
| Číslo modelu | RES-VY2BMX-00 |
7. Záruka a podpora
The Trimble Recon comes with a full manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Trimble webmísto.
For technical support, software updates, or additional resources, please visit the official Trimble support portal or contact their customer service. Keep your product's model number (RES-VY2BMX-00) and serial number ready when seeking support.
Official Trimble Webmísto: www.trimble.com
