1. Bezpečnostní pokyny
Always observe basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury. Read all instructions carefully before operating this belt sander.
- Bezpečnost pracovního prostoru: Udržujte pracovní prostor čistý a dobře osvětlený. Nepořádek nebo tmavé prostory vedou k nehodám. Nepoužívejte elektrické nářadí ve výbušném prostředí, například v přítomnosti hořlavých kapalin, plynů nebo prachu.
- Elektrická bezpečnost: Zástrčky elektrického nářadí musí odpovídat zásuvce. Nikdy zástrčku nijak neupravujte. Zabraňte kontaktu těla s uzemněnými povrchy, jako jsou potrubí, radiátory, sporáky a ledničky.
- Osobní bezpečnost: Vždy používejte ochranu očí. V případě potřeby používejte protiprachovou masku, protiskluzovou bezpečnostní obuv, ochrannou přilbu nebo ochranu sluchu. Nenaklánějte se příliš daleko. Vždy udržujte stabilní postoj a rovnováhu.
- Použití a péče o nářadí: Netlačte na elektrické nářadí silou. Používejte správné elektrické nářadí pro danou aplikaci. Před prováděním jakýchkoli úprav, výměnou příslušenství nebo uložením elektrického nářadí odpojte zástrčku od zdroje napájení.
- Odsávání prachu: This tool is equipped with an integrated dust extraction system and an adapter for external dust extraction. Always use dust collection to minimize exposure to harmful dust.
2. Konec produktuview
The Einhell TE-BS 8540 is a high-performance belt sander designed for flexible and effective grinding tasks. It features variable speed control, precise belt tracking adjustment, and a quick, tool-free sanding belt change mechanism.
Obrázek 2.1: Celkově view of the Einhell TE-BS 8540 Belt Sander. This image displays the complete tool, highlighting its ergonomic design with the main handle and auxiliary handle, the sanding belt area, and the dust collection box.
Klíčové vlastnosti:
- Výkonný motor: 850 W motor for efficient sanding on various surfaces.
- Large Sanding Surface: 75 mm x 140 mm grinding/sanding face for quick and precise results on large areas.
- Elektronické ovládání rychlosti: Adjustable speed settings to match the material and application requirements.
- Precision Belt Adjustment: Ensures exact belt positioning for optimal performance.
- Hinged Front Cover: Allows for sanding close to edges.
- Ergonomický design: Soft grip and tool-free adjustable additional handle for comfortable use.
- Integrované odsávání prachu: Includes a dust collection box and an adapter for connecting an external dust extractor.
- Quick Belt Change: Tool-free sanding belt replacement via a locking lever.
- Kabelová svorka: For tidy storage of the power cable.
3. Nastavení
3.1. Installing the Sanding Belt
- Ensure the sander is disconnected from the power supply.
- Locate the locking lever for the sanding belt (see Figure 3.1).
- Pull the locking lever to release the tension on the sanding belt.
- Remove the old sanding belt, if present.
- Place the new sanding belt onto the rollers, ensuring the arrow on the inside of the belt matches the direction of rotation indicated on the sander (see Figure 3.2).
- Push the locking lever back to tension the new sanding belt.
Obrázek 3.1: The locking lever for quick and tool-free sanding belt changes. Pushing this lever releases tension, allowing for easy belt removal and installation.
Obrázek 3.2: A typical sanding belt, showing the internal arrow indicating the correct direction of rotation for installation on the sander.
3.2. Adjusting Belt Tracking
After installing a new belt, it is crucial to adjust the belt tracking to ensure the belt runs centrally on the rollers and does not rub against the housing.
- Briefly switch on the sander (without touching the workpiece) and observe the belt's movement.
- Use the belt tracking adjustment knob (see Figure 3.3) to fine-tune the belt's position. Turn the knob clockwise to move the belt in one direction and counter-clockwise to move it in the other until it runs centrally.
- Repeat this process if the belt tracking shifts during operation.
Obrázek 3.3: The knob used for precise adjustment of the sanding belt's tracking, ensuring it remains centered during operation.
3.3. Odsávání prachu
The sander comes with an integrated dust collection box. For enhanced dust control, an adapter is provided to connect an external dust extractor.
- Attach the dust collection box to the designated port on the sander.
- Alternatively, connect a suitable external dust extractor hose to the adapter and then to the sander's dust port.
- Regularly empty the dust collection box or external extractor to maintain optimal performance and prevent clogging.
Obrázek 3.4: Strana view of the belt sander, showing the dust extraction port where the collection box or an external extractor can be attached.
3.4. Adjusting the Auxiliary Handle
The additional handle can be adjusted without tools to provide optimal grip and comfort for different working positions. Loosen the knob on the handle, adjust to the desired angle, and then tighten the knob securely.
4. Provoz
4.1. Zapnutí/vypnutí
- Zapojte brusku do vhodné elektrické zásuvky.
- To switch on, press the ON/OFF switch. For continuous operation, engage the lock-on button.
- To switch off, release the ON/OFF switch. If locked on, press the switch again briefly to release the lock.
4.2. Řízení s proměnnou rychlostí
The electronic speed control allows you to adjust the sanding speed to suit the material and desired finish.
Obrázek 4.1: Close-up of the variable speed control dial, allowing users to select the appropriate sanding speed for different materials and tasks.
- Rotate the speed control dial to select the desired speed setting (typically from 1 to 6).
- Lower speeds are suitable for delicate materials or fine finishing, while higher speeds are for rapid material removal.
4.3. Sanding Techniques
Always hold the sander firmly with both hands. Apply even, moderate pressure and move the sander smoothly across the workpiece. Avoid excessive pressure, which can lead to uneven sanding and premature belt wear.
Obrázek 4.2: A user demonstrating the proper two-handed grip and technique for operating the belt sander on a flat surface.
- Obecné broušení: Move the sander in the direction of the wood grain for best results. Overlap each pass slightly to ensure uniform sanding.
- Broušení hran: The front cover of the sander can be folded up to allow sanding closer to edges and in confined spaces (see Figure 4.3).
Obrázek 4.3: Přední view of the belt sander, illustrating the hinged cover that can be lifted to facilitate sanding in areas close to edges.
5. Údržba
Regular maintenance ensures the longevity and optimal performance of your belt sander. Always disconnect the tool from the power supply before performing any maintenance.
- Čištění: After each use, clean the tool, especially the ventilation slots and the dust collection system, to prevent dust buildup. Use a soft brush or compressed air.
- Sanding Belt Replacement: Replace worn or damaged sanding belts promptly following the instructions in Section 3.1.
- Kontrola kabelů: Regularly inspect the power cable for any signs of damage. If damaged, have it replaced by a qualified electrician.
- Skladování: Store the belt sander in a dry, secure place, out of reach of children. Use the integrated cable clip (see Figure 5.1) for tidy cable storage.
Obrázek 5.1: Zadní view of the belt sander, showing the practical cable clip for securing the power cord during storage.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Bruska nestartuje. | Chybí napájení; vadný vypínač. | Check power connection and outlet. Ensure switch is fully engaged. If problem persists, seek professional service. |
| Sanding belt slips or runs off. | Belt not tensioned correctly; belt tracking not adjusted; worn belt. | Ensure locking lever is engaged. Adjust belt tracking (Section 3.2). Replace worn belt. |
| Špatný brusný výkon. | Worn sanding belt; incorrect grit for material; insufficient pressure. | Replace sanding belt. Use appropriate grit for the task. Apply even, moderate pressure. |
| Nadměrný prach. | Dust collection box full or improperly attached; clogged dust port. | Empty dust box. Ensure proper attachment. Clear any blockages in the dust port. |
7. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Einhell |
| Číslo modelu | TE-BS 8540 |
| Zdroj napájení | Elektrický kabel |
| svtage | 230 voltů |
| Wattage | 850 wattů |
| Rozměry produktu (D x Š x V) | 12.99 cm x 6.69 cm x 4.72 cm |
| Hmotnost položky | 3.1 kilogramů (6.82 liber) |
| Typ zrna | Medium (P80 included) |
| Maximální rychlost otáčení | 12000 RPM (Motor speed, not belt speed) |
| Sanding Surface Area | 75 mm x 140 mm |
8. Záruka a podpora
Informace o záruce naleznete v záručním listu, který je součástí vašeho produktu, nebo navštivte oficiální webové stránky společnosti Einhell. website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly. Keep your purchase receipt as proof of purchase.
Kontaktní údaje: Please refer to the contact details provided in your product packaging or on the official Einhell webstránky pro váš region.
