Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your Kolpin UTV Rear/Side Mirror, Model 98300. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Kolpin UTV Rear/Side Mirror 98300 is designed to provide enhanced rear and side visibility for UTVs. It features a wide-angle convex lens and a quick-pivot design for easy adjustment.
Bezpečnostní informace
Always ensure the mirror is securely mounted before operating your UTV. Regularly check all mounting hardware for tightness. Do not obstruct your view of the road or trail with the mirror. Adjust the mirror only when the vehicle is stationary.
Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o nichž je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné poškození reprodukce.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Kolpin UTV Rear/Side Mirror - 98300 (1 unit)
- Mounting Hardware (included with mirror)
Nastavení a instalace
The Kolpin UTV Rear/Side Mirror 98300 offers universal overhead mounting options. It can be mounted on 1-1/2" to 2" round tubes or flat drillable surfaces. The clamp design allows for overhead mounting even with a roof installed.
Mounting on Round Tubes:
- Identify a suitable location on your UTV's roll bar or overhead tube (1-1/2" to 2" diameter) that provides optimal rear/side visibility without obstructing your forward view.
- Position the mirror clamp around the chosen tube.
- Zajistěte třamp using the provided hardware. Ensure the clamp is tightened sufficiently to prevent movement, but do not overtighten.
- Adjust the mirror angle using the quick-pivot design to achieve the desired viewúhel.
Image: The Kolpin UTV Rear/Side Mirror 98300 securely mounted on a UTV's overhead roll bar, showing the clamp mechanismus.
Obrázek: Interiér view of a UTV cabin with the Kolpin Rear/Side Mirror installed overhead, providing a clear rearward perspective for the driver.
Mounting on Flat Drillable Surfaces:
- Select a flat, sturdy surface on your UTV's roof or interior that can accommodate drilling and provides an unobstructed view.
- Mark the drilling points using the mirror's mounting bracket as a template.
- Drill pilot holes appropriate for the mounting hardware.
- Attach the mirror bracket to the surface using suitable fasteners (not included, as specific fasteners depend on surface material).
- Secure the mirror to the bracket and adjust its angle.
Image: A wider interior shot of a UTV showing the Kolpin Rear/Side Mirror mounted, highlighting its position relative to the windshield and driver's area.
Návod k obsluze
The Kolpin UTV Rear/Side Mirror features a highly engineered quick-pivot design, allowing for easy adjustment of the mirror angle while seated in the UTV cabin.
- Ensure your UTV is stationary and in a safe location before adjusting the mirror.
- Grasp the mirror housing and gently pivot it to achieve your desired rear or side viewing angle. The quick-pivot mechanism allows for smooth, tool-free adjustments.
- Verify that the mirror provides a clear and unobstructed view of the area behind and to the sides of your UTV.
Image: The rear casing of the Kolpin UTV Rear/Side Mirror, displaying the "KOLPIN" brand logo, indicating the product's design and branding.
Údržba
To ensure the longevity and optimal performance of your Kolpin UTV Rear/Side Mirror, follow these maintenance guidelines:
- Čištění: Clean the mirror surface with a soft cloth and a mild glass cleaner. Avoid abrasive cleaners or materials that could scratch the lens.
- Inspekce: Periodically inspect all mounting hardware for tightness. Vibrations during UTV operation can loosen fasteners over time. Tighten any loose bolts or screws as needed.
- Kontrola poškození: Regularly check the mirror housing and lens for any signs of damage, cracks, or wear. Replace the mirror if it becomes damaged to maintain clear visibility.
Odstraňování problémů
If you encounter issues with your Kolpin UTV Rear/Side Mirror, consider the following common solutions:
- Mirror Vibrates Excessively:
- Ensure all mounting hardware is securely tightened. Loose connections can cause vibration.
- Verify that the mounting surface is stable and not contributing to vibrations.
- Difficulty Adjusting Mirror:
- Check for any obstructions around the pivot mechanism.
- Ensure the pivot point is clean and free of debris.
- Poor Visibility:
- Důkladně očistěte povrch zrcadla.
- Adjust the mirror angle to optimize your field of view.
- Ensure the mirror is not scratched or damaged.
Specifikace
| Číslo modelu | 98300 |
| Značka | Kolpin |
| Pozice dílu | Zadní / boční |
| Dimensions (Mirror) | 10 palce x 3 palců |
| Celkové rozměry produktu | 12.25 x 11.75 x 3.5 palce |
| Hmotnost položky | 1.3 liber (0.59 kilogramů) |
| Materiál | Plast |
| Typ montáže | Roof Mount (Universal for 1.5"-2" round tubes or flat surfaces) |
| Zakřivení čočky | Konvexní |
| Speciální funkce | Adjustable, Quick-Pivot Design |
| Fit Type | Vehicle Specific Fit (UTV) |
| UPC | 028752983006 |
Záruka a podpora
For specific warranty information and customer support, please refer to the official Kolpin website or contact Kolpin customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
Výrobce: Kolpin
Číslo dílu výrobce: 23-2023
