Zavedení
The Technoline WS 9140-IT is a temperature station designed for monitoring both indoor and outdoor temperatures. It features a DCF-77 radio-controlled clock for automatic time synchronization, an alarm with snooze function, and records minimum and maximum temperature values. This device can be conveniently placed on a table or mounted on a wall.
Obsah balení
Please check that all components are present in the package:
- 1 x WS 9140-IT Base Station
- 1 x TX37-IT Outdoor Sensor
- Uživatelská příručka (tento dokument)
Konec produktuview
The Technoline WS 9140-IT consists of a main base station and a wireless outdoor sensor. The base station displays time, indoor temperature, and outdoor temperature. It also features control buttons for settings and functions.
Obrázek 1: Technoline WS 9140-IT Temperature Station and its packaging.
Obrázek 2: Přední view of the base station and the outdoor sensor, showing display elements and technical specifications.
Base Station Display Elements:
- Zobrazení času: Shows current time, synchronized via DCF-77 radio signal.
- Vnitřní teplota: Displays the temperature measured by the base station.
- Venkovní teplota: Displays the temperature received from the wireless sensor.
- MIN/MAX Indicators: Shows recorded minimum and maximum temperatures.
- Indikátor baterie: Upozornění na nízký stav baterií.
Ovládací tlačítka:
- SOUBOR: Vstupuje do režimu nastavení.
- POPLACH: Activates/deactivates alarm and enters alarm setting mode.
- MIN/MAX RESET: Displays minimum/maximum values and resets them.
- '+' / '-': Adjusts values during setting or changes display options.
Nastavení
1. Instalace baterie
For the Outdoor Sensor (TX37-IT):
- Otevřete kryt přihrádky na baterie na zadní straně venkovního senzoru.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
For the Base Station (WS 9140-IT):
- Open the battery compartment cover on the back of the base station.
- Insert 2 x AA Mignon LR06 batteries, observing the correct polarity (+/-).
- Bezpečně zavřete kryt bateriového prostoru.
Note: Always insert batteries into the outdoor sensor first, then into the base station to ensure proper synchronization.
2. Umístění senzoru
Place the outdoor sensor in a shaded, dry location, protected from direct sunlight and rain, to ensure accurate temperature readings. The maximum transmission distance is 100 meters in open air. Avoid placing it near large metal objects or electrical appliances that may interfere with the signal.
3. Initial Synchronization (DCF-77 Radio Clock)
After battery installation, the base station will automatically begin searching for the DCF-77 radio signal. This process may take several minutes. Once the signal is received, the time will be set automatically. A radio tower icon will appear on the display, indicating successful synchronization.
4. Manual Time Setting (Optional)
If the radio signal is not available or if you prefer to set the time manually:
- Stiskněte a podržte SOUBOR tlačítko, dokud nezačnou blikat číslice hodin.
- Použijte '+' or '-' tlačítka pro nastavení hodiny.
- Stiskněte SOUBOR again to confirm and move to minute setting.
- Použití '+' or '-' upravit minuty.
- Stiskněte SOUBOR to confirm and exit manual time setting.
5. Úprava časového pásma
To adjust for different time zones (± 12 hours):
- V normálním režimu zobrazení času stiskněte a podržte SOUBOR tlačítko, dokud nezačnou blikat číslice hodin.
- Stiskněte SOUBOR repeatedly until the time zone offset (e.g., '00') flashes.
- Použijte '+' or '-' buttons to adjust the time zone offset.
- Stiskněte SOUBOR pro potvrzení a ukončení.
Návod k obsluze
1. Naměřená teplota
The current indoor and outdoor temperatures are continuously displayed on the base station's screen.
2. Minimum/Maximum Temperature Recording
The station automatically records the minimum and maximum indoor and outdoor temperatures since the last reset.
- Stiskněte tlačítko MIN/MAX RESET button once to display the maximum recorded temperatures.
- Stiskněte tlačítko MIN/MAX RESET button a second time to display the minimum recorded temperatures.
- Stiskněte a podržte MIN/MAX RESET button to clear the recorded minimum and maximum values. The display will show the current temperatures, and new min/max values will begin recording.
3. Alarm Setting and Snooze Function
Nastavení budíku:
- Stiskněte tlačítko POPLACH jednou stiskněte tlačítko pro zobrazení času budíku.
- Stiskněte a podržte POPLACH tlačítko , dokud nezačnou blikat číslice hodin budíku.
- Použijte '+' or '-' tlačítka pro nastavení hodiny budíku.
- Stiskněte POPLACH again to confirm and move to alarm minute setting.
- Použití '+' or '-' pro nastavení minut budíku.
- Stiskněte POPLACH pro potvrzení a ukončení nastavení budíku.
Aktivace/deaktivace alarmu:
- V normálním režimu zobrazení času stiskněte POPLACH button repeatedly to toggle the alarm ON or OFF. An alarm icon will appear on the display when the alarm is active.
Funkce odložení:
- Když zazní budík, stiskněte libovolné tlačítko (kromě POPLACH) to activate the snooze function. The alarm will sound again after approximately 5 minutes.
- Chcete-li alarm úplně zastavit, stiskněte tlačítko POPLACH button when it is sounding.
4. Indikátor slabé baterie
A low battery icon will appear on the display when the batteries in either the base station or the outdoor sensor need to be replaced. Replace all batteries promptly to ensure continuous operation and accurate readings.
Údržba
1. Výměna baterie
When the low battery indicator appears, replace the batteries in both the base station and the outdoor sensor. Use 2 x AA Mignon LR06 batteries for each unit. Ensure correct polarity during installation.
2. Čištění
Otřete jednotky měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit displej neboasing. Ensure the units are dry before re-inserting batteries or operating.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| No outdoor temperature display or '---' | No signal from outdoor sensor; Batteries in sensor are low or incorrectly inserted; Sensor too far from base station or obstructed. | Check sensor batteries and polarity. Move sensor closer to base station. Avoid obstructions like thick walls or metal objects. Re-synchronize by removing and re-inserting batteries in both units (sensor first). |
| Nesprávné zobrazení času | DCF-77 signal not received; Incorrect time zone setting. | Ensure base station is placed away from electronic interference. Allow time for automatic synchronization. Manually set time or adjust time zone if necessary. |
| Displej je tmavý nebo prázdný | Low batteries in base station. | Replace batteries in the base station. |
| Alarm nezazní | Alarm is not activated; Alarm time is incorrectly set. | Ensure the alarm icon is visible on the display. Verify the alarm time setting. |
Specifikace
- Model: WS 9140-IT
- Značka: Technoline
- Base Station Dimensions (L x W x H): 73 x 25 x 158 mm
- Outdoor Sensor Dimensions (L x W x H): 38 x 21 x 128 mm
- Base Station Power: 2 x AA Mignon LR06 batteries (not included)
- Napájení venkovního senzoru: 2 x AA Mignon LR06 batteries (not included)
- Rozsah vnitřní teploty: -10°C až +40°C
- Rozsah venkovních teplot: -40°C až +60°C
- Přenosová frekvence: 868 MHz
- Přenosová vzdálenost: Až 100 metrů (otevřené pole)
- Speciální vlastnosti: DCF-77 Radio-controlled clock, Manual time setting option, Time zone adjustment (± 12 h), MIN/MAX temperature memory, Alarm with snooze function, Low battery indicator, Wall mount or table stand.
- Materiál: Plast
Obrázek 3: The Technoline WS 9140-IT base station can be wall-mounted for convenient viewIng.
Záruka a podpora
Specific warranty information and detailed support contacts are not provided in the product data. For warranty claims or technical assistance, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. You may also visit the official Technoline webweb s obecnými informacemi o podpoře.
