Konec produktuview
The Behringer DR600 DIGITAL REVERB is a digital stereo reverb effects pedal designed for guitarists and other musicians seeking studio-quality reverb effects in a compact stompbox format. It offers a versatile range of reverb types and intuitive controls for sound shaping.
This pedal features 24-bit high-resolution stereo reverbs, including Spring, Plate, Hall, Gate, Room, and Modulate. It is equipped with dedicated Mode, Time, Tone, and Level controls for comprehensive sound adjustment. The DR600 can be powered by a 9V battery or an optional BEHRINGER PSU-SB DC power supply.
A blue status LED indicates effect on/off status and battery check. The pedal incorporates a first-class electronic On/Off switch to ensure high signal integrity in bypass mode. Its robust construction is designed for long-term durability.
Nastavení a připojení
Before connecting the DR600, ensure all audio equipment is turned off to prevent damage from sudden signal spikes.
Napájení
- Napájení baterie: The DR600 requires one 9V battery (not included). To install, open the battery compartment on the underside of the pedal. The blue status LED will indicate battery status.
- AC adaptér: For extended use, the pedal can be powered by an optional BEHRINGER PSU-SB DC power supply (not included). Connect the power supply to the 9V DC input jack.
Audio připojení
The DR600 features stereo inputs and outputs for versatile connectivity.
- Input A (IN A): Connect your instrument (e.g., guitar) or the output of a preceding effects pedal to this input using a 1/4-inch TS cable.
- Input B (IN B): For stereo input, connect the second channel of your stereo signal source to this input.
- Output A (OUT A): Připojte tento výstup k vašemu amplifier's input or the input of the next pedal in your signal chain.
- Output B (OUT B): For stereo output, connect this output to the second input of a stereo ampzařízení na zhášení žáruvzdornosti nebo mixér.
Obrázek 1: Shora dolů view of the DR600 pedal, highlighting the control knobs and input/output jacks.
Operating the DR600
The DR600 is designed for ease of use with intuitive controls.
Ovládací prvky
- Knoflík LEVEL: Controls the overall output level of the reverb effect. Turn clockwise to increase the effect volume.
- Knoflík TONE: Adjusts the tonal character of the reverb. From "LO" (low) to "HI" (high), this knob shapes the brightness or darkness of the reverb tail.
- Knoflík TIME: Determines the decay time or length of the reverb. Turn clockwise for longer, more expansive reverb tails.
- Knoflík MODE: Selects one of the six available reverb types:
- JARO: Emulates the classic sound of a spring reverb tank, often found in vintage kytara ampzáchranáři.
- TALÍŘ: Simulates the smooth, dense decay of a plate reverb, commonly used in studio recordings.
- HALA: Recreates the expansive and natural reverberation of a large concert hall.
- BRÁNA: Produces a reverb tail that is abruptly cut off, creating a dramatic and percussive effect.
- POKOJ: Simulates the acoustics of a smaller, more intimate room, providing a natural and subtle ambiance.
- MODULOVAT: Adds modulation (e.g., chorus or flanger-like movement) to the reverb tail, creating a swirling, ethereal effect.
- LED dioda ZAPNUTO/BATERIE: This blue LED illuminates when the effect is active. It also serves as a battery check indicator; if the LED dims or does not light up, the battery may need replacement.
- Nožní spínač: Engages or bypasses the reverb effect. Press the footswitch to toggle between effect on and bypass modes. The electronic switch ensures signal integrity when bypassed.
Obrázek 2: Úhlové view of the DR600 pedal, illustrating its compact design and side jacks.
Údržba
Proper maintenance ensures the longevity and optimal performance of your DR600 pedal.
Výměna baterie
When the ON/BATT LED dims or the effect performance degrades, it's time to replace the 9V battery. Turn off all connected equipment, open the battery compartment, remove the old battery, and insert a new one, observing polarity. Close the compartment securely.
Čištění
Clean the pedal's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish and internal components. Ensure no liquids enter the pedal's housing.
Skladování
If storing the pedal for an extended period, remove the battery to prevent leakage and potential damage. Store in a cool, dry place away from direct sunlight and extreme temperatures.
Odstraňování problémů
If you encounter issues with your DR600, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk nebo slabý zvuk. |
|
|
| Effect not engaging (LED off). |
|
|
| Distorted or undesirable sound. |
|
|
Specifikace
| Model: | DR600 |
| Typ efektu: | Digital Stereo Reverb |
| Typy dozvuku: | Spring, Plate, Hall, Gate, Room, Modulate |
| Digitální konverze: | 24-bit high-resolution |
| Ovládání: | Level, Tone, Time, Mode |
| Vstupy: | IN A, IN B (1/4-inch TS) |
| výstupy: | OUT A, OUT B (1/4-inch TS) |
| Napájení: | 9V Battery or BEHRINGER PSU-SB DC power supply (not included) |
| Hmotnost položky: | 11.7 unce (0.73 libry) |
| Rozměry produktu: | 2.76 x 2.13 x 4.84 palce (2.76"D x 2.13"Š x 4.84"V) |
| Typ materiálu: | Kov |
| Barva: | Stříbro |
Záruka a podpora
The Behringer DR600 is designed and engineered in Germany, featuring high-quality components and exceptionally rugged construction to ensure a long operational life. For detailed warranty information and technical support, please refer to the official Behringer webnebo kontaktujte jejich oddělení zákaznických služeb.
It is recommended to register your product online to receive the latest warranty terms and product updates.
Pro další pomoc navštivte stránku Obchod Behringer na Amazonu nebo jejich oficiální podpůrné kanály.
