Sada vinutých pružin MOOG 81010 pro Chevrolet Express 2500 - návod k obsluze

Zavedení

This instruction manual provides essential information for the proper handling, installation, and maintenance of your MOOG 81010 Coil Spring Set. MOOG Problem Solver products are engineered with proven design features to ensure like-new steering performance, ease of installation, and extended service life. Adhering to these guidelines will help ensure optimal performance and safety.

Konec produktuview

The MOOG 81010 Coil Spring Set is a critical component for your vehicle's suspension system, designed to restore ride height and handling characteristics. These coil springs are 100% load tested to ensure consistent performance and are designed to lower stresses for a longer service life, providing like-new steering feel.

Image: Two black MOOG 81010 coil springs, designed for vehicle suspension systems.

Kompatibilita

This coil spring set is compatible with the following vehicle models:

• Chevrolet Express 1500, rok výroby 2003-2014
• Chevrolet Express 2500, rok výroby 2003-2016
• Chevrolet Express 2500, rok výroby 2003-2005
• GMC Savana 1500, rok výroby 2003-2014
• GMC Savana 2500, rok výroby 2003-2016
• GMC Savana 2500, rok výroby 2003-2005

Před nákupemasing or installing, it is crucial to research and ensure that the part will fit your specific vehicle. Always enter all vehicle information (year, make, model, engine, and trim) for compatibility verification and check any qualifier notes.

Co je v krabici

Your MOOG 81010 Coil Spring Set package should contain:

• Coil Spring Set

Pokyny pro instalaci

Installation of suspension components should be performed by a qualified professional. Improper installation can lead to vehicle damage or personal injury. The MOOG 81010 Coil Spring Set is designed for easy installation, but professional expertise is recommended.

1. Ensure the vehicle is safely supported on a lift or sturdy jack stands on a level surface.
2. Refer to your vehicle's specific service manual for detailed removal and installation procedures for coil springs.
3. Carefully remove the old coil springs, noting their orientation and any associated components.
4. Install the new MOOG 81010 Coil Springs, ensuring proper seating in the spring pockets and alignment with all mounting points.
5. Reassemble all components, including shocks, struts, and control arms, according to manufacturer specifications.
6. After installation, it is highly recommended to perform a professional wheel alignment to prevent premature tire wear and ensure proper vehicle handling.

Bezpečnostní upozornění:

Coil springs are under significant compression and can cause serious injury if not handled correctly. Always use appropriate spring compressors and personal protective equipment (PPE) during removal and installation.

Údržba a péče

MOOG coil springs are designed for long service life. To ensure continued optimal performance and longevity, regular vehicle inspections are recommended:

• Periodically inspect coil springs for any signs of damage, such as cracks, corrosion, or deformation.
• Address any issues with worn or sagging coil springs promptly, as they can cause premature tire wear due to vehicle misalignment and negatively impact ride quality.
• Keep suspension components clean to prevent the accumulation of dirt, salt, and debris, which can accelerate wear.

Odstraňování problémů

If you experience issues after installing your MOOG 81010 Coil Spring Set, consider the following common points:

• Nerovnoměrná výška jízdy: Verify that the correct springs were installed on the correct side of the vehicle (if applicable) and that they are properly seated in their mounts.
• Nadměrný hluk: Check for loose fasteners or components rubbing against each other. Ensure all suspension components are torqued to the vehicle manufacturer's specifications.
• Premature Tire Wear: This is often a symptom of worn or sagging coil springs, or improper wheel alignment after installation. A professional alignment is crucial after any suspension work.

For persistent or complex issues, it is always best to consult a certified automotive technician.

Specifikace

Záruka a podpora

For information regarding warranty coverage and technical support for your MOOG 81010 Coil Spring Set, please refer to the official MOOG website or contact MOOG customer service directly. MOOG is committed to providing quality products and support.

MOOG Customer Support:

• Webmísto: www.moogparts.com
• Kontaktní údaje: Zkontrolujte prosím webweb s nejaktuálnějšími kontaktními údaji, včetně telefonních čísel a e-mailových adres.