Tunze USA 7607/2 Water Level Alarm with 3-Sensors Instruction Manual

1. Úvod

Thank you for choosing the Tunze USA 7607/2 Water Level Alarm. This device is designed to monitor water levels and provide alerts for both run-dry and overflow conditions, ensuring the safety and proper functioning of your aquatic system. It features three independent sensors and a control unit with optical indicators and an audible alarm.

Please read this instruction manual carefully before installation and operation to ensure correct usage and to prevent damage to the unit or your system.

2. Bezpečnostní pokyny

• Před zahájením jakékoli údržby nebo instalace vždy odpojte napájení.
• Ensure the device is installed in a dry location, away from direct water splashes, unless specified for submersible use.
• Pokud je napájecí kabel nebo zástrčka poškozená, zařízení nepoužívejte.
• Toto zařízení je určeno pouze pro vnitřní použití.
• Uchovávejte mimo dosah dětí.
• The switched socket outlet has a maximum switching capacity of 230V / 1,800W (at 115V / 900W). Do not exceed this limit.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• 1x Tunze USA 7607/2 Control Unit
• 3x Water Level Sensors (1x run-dry, 2x overflow)
• 3x Sensor Holding Devices
• 1x Power Cable with Switched Socket Outlet
• 1x Návod k obsluze (tento dokument)

4. Konec produktuview

The Tunze USA 7607/2 Water Level Alarm consists of a central control unit and three independent float sensors. The control unit provides visual feedback via optical indicators for each sensor and an audible alarm for critical events. The sensors are designed for flexible mounting within your system.

Obrázek 1: Tunze USA 7607/2 Water Level Alarm components. This image displays the main control unit, three water level sensors, and their respective holding devices.

4.1 Řídicí jednotka

• Optické indikátory: Individual lights for each of the three sensors, indicating their status.
• Zvukový alarm: Emits a sound when a critical water level is detected.
• Switched Socket Outlet: Connects to a pump or other device, allowing it to be switched on/off based on sensor input.

4.2 Senzory

• Run-Dry Sensor: Typically placed at a low water level to prevent pumps from running dry.
• Overflow Sensors (x2): Placed at higher water levels to detect potential overflows.
• Holding Devices: Can be attached with silicone or clamped to horizontal or vertical panes. Multiple holding devices can be combined for custom configurations.

5. Nastavení a instalace

1. Namontujte řídicí jednotku: Choose a dry, easily accessible location for the control unit. Ensure it is securely mounted and protected from splashes.
2. Position the Sensors:
   • Determine the desired water levels for run-dry and overflow detection.
   • Attach the sensor holding devices to your tank or sump using silicone or by clamping them to the panes.
   • Insert the sensors into their respective holding devices. Ensure the float mechanism moves freely.
   • Connect the sensor cables to the corresponding ports on the control unit.
3. Connect the Pump (Optional): If you wish to control a pump, plug the pump's power cord into the switched socket outlet on the control unit.
4. Zapnutí: Plug the control unit's power cord into a suitable electrical outlet. The optical indicators should illuminate briefly during startup.

Poznámka: For optimal performance, ensure sensor cables are routed neatly and securely to prevent accidental dislodgement.

6. Návod k obsluze

Once installed and powered on, the Tunze USA 7607/2 Water Level Alarm continuously monitors the water levels via its three sensors.

6.1 Sensor Indicators

• Each sensor has a corresponding optical indicator on the control unit.
• When a sensor detects a critical water level (e.g., water too low for run-dry, water too high for overflow), its indicator light will change state (e.g., from green to red, or off to on, depending on the specific model's design).

6.2 Zvukový alarm

• Upon detection of a critical water level by any of the configured sensors, the control unit will emit an audible alarm.
• The alarm serves as an immediate notification of a potential issue.
• Consult the troubleshooting section for steps to address the alarm condition.

6.3 Switched Socket Outlet Functionality

• The switched socket outlet can be configured to turn a connected pump ON or OFF based on specific sensor triggers.
• Napřample, it can turn off a return pump if the run-dry sensor is triggered, or turn on an emergency drain pump if an overflow sensor is triggered. Refer to the specific wiring diagram or advanced settings in the full manual for detailed configuration options.

7. Údržba

• Pravidelný úklid: Periodically clean the sensors to prevent algae, calcium, or other debris buildup that could impede the float mechanism. Use a soft brush and warm water. Do not use harsh chemicals.
• Kontrola senzoru: Manually test each sensor periodically by gently moving the float to ensure it triggers correctly. Observe the optical indicators on the control unit.
• Kontrola kabelů: Inspect all cables for signs of wear, damage, or corrosion. Replace damaged cables immediately.
• Řídicí jednotka: Keep the control unit clean and dry. Wipe with a soft, damp v případě potřeby hadříkem.

8. Řešení problémů

If the problem persists after attempting these solutions, please contact Tunze USA customer support.

9. Specifikace

• Model: 7607/2
• Výrobce: Tunze USA LLC
• Rozměry produktu: 6.35 x 5.08 x 2.54 cm (2.5 x 2 x 1 palce)
• Hmotnost položky: 1.59 kg (3.5 liber)
• svtage: 230 Volts (Control unit input)
• Switched Socket Capacity: Up to 230V / 1,800W (at 115V / 900W)
• Senzory: 3 (1x run-dry, 2x overflow)

10. Záruka a podpora

For warranty information and technical support, please refer to the official Tunze USA webwebu nebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Tunze USA Contact Information:

• Webmísto: www.tunze.com/us/ (Please check for the most current contact details)
• Služby zákazníkům: Viz webweb s telefonními čísly nebo e-mailovou podporou.