Zavedení
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the Intermatic P1353ME 3-Circuit Pool/Spa Digital Time Switch. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.
The Intermatic P1353ME is designed for aftermarket retrofit applications, allowing for an upgrade to a digital control system without replacing the existing enclosure. It features 3 timed circuits for various pool and spa components, including filter pumps (up to 3 HP), 2-speed pumps, pool lights, landscape lights, fountain pumps, blowers, and cleaner pumps.
Důležité bezpečnostní informace
VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem.
Always turn off power at the main panel before servicing this switch or the equipment it controls. Use 75°C copper conductors only. Reinstall the insulator after wiring.
This device must be installed by a qualified electrician in accordance with all local and national electrical codes.
Observe all safety precautions to prevent injury or damage to the equipment.
Konec produktuview
The Intermatic P1353ME is a versatile digital time switch designed for precise control of pool and spa equipment. Key features include:
- Controls single- and two-speed pumps, along with cleaner/booster pumps.
- Three ON/OFF events per circuit per day for customizable scheduling.
- Seven preprogrammed modes for easy setup.
- Built-in freeze and heater protection.
- Vícesvtage input and output (120V or 208-240V).
- LCD display for clear monitoring.
- Memory back-up.
- Fireman switch capability.
Obrázek: Přední strana view of the Intermatic P1353ME Digital Time Switch, showing the LCD display, control buttons (MODE, PROG, ENTER, UP/DOWN arrows), and ON/OFF buttons for Circuit 1, Circuit 2, and Circuit 3. A caution label regarding electrical shock and mode key usage is visible at the bottom.
Nastavení a instalace
Kontrolní seznam před instalací:
- Ensure power is OFF at the main breaker.
- Verify existing enclosure compatibility (designed to snap into any Intermatic enclosure).
- Confirm required voltage (120V or 208-240V) matches the unit's capabilities.
- Připravte si potřebné nástroje: šroubovák, odizolovací kleště,tage tester.
Kroky instalace:
- Odpojení napájení: Turn off power to the existing time switch at the main electrical panel. Verify power is off using a voltage tester.
- Odstraňte starý mechanismus: Carefully remove the old mechanical time switch mechanism from the Intermatic enclosure.
- Instalace nového mechanismu: Snap the P1353ME digital mechanism into the existing Intermatic enclosure. Ensure it is securely seated.
- Zapojení: Connect the electrical wiring according to the wiring diagram provided with the unit. Ensure all connections are tight and secure. Use 75°C copper conductors only.
- Reinstall Insulator: After wiring, reinstall any insulators or protective covers that were removed.
- Zavřít přílohu: Securely close the enclosure cover.
- Obnovit napájení: Turn power back on at the main electrical panel.
For detailed wiring diagrams, refer to the official product documentation or consult a qualified electrician.
Návod k obsluze
Initial Power-Up and Time Setting:
- Upon initial power-up, the LCD display will illuminate.
- Set the current time and date using the PROG, ENTER, and UP/DOWN arrow keys. Follow the on-screen prompts.
Programming Circuits:
The P1353ME allows for three ON/OFF events per circuit per day.
- Programování přístupu: Stiskněte tlačítko PROG key to cycle through menu options.
- Nastavení procházení: Použijte UP a DOLŮ arrow keys to change program settings (e.g., ON/OFF times for each circuit).
- Confirm Changes: Stiskněte tlačítko ENTER key to save changes and exit programming mode.
Ruční provoz:
To manually turn devices ON or OFF:
- Stiskněte příslušné tlačítko ON/OFF buttons located below the LCD display for Circuit 1, Circuit 2, or Circuit 3.
Preprogrammed Modes:
The unit features seven preprogrammed modes for common applications. Consult the full user manual (PDF link provided in product details) for details on selecting and customizing these modes.
Údržba
The Intermatic P1353ME is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Pravidelná prohlídka: Annually inspect the unit for any signs of physical damage, loose connections, or corrosion.
- Čištění: Keep the exterior of the unit clean and free of dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Cyklus napájení: If the unit behaves unexpectedly, try cycling the power off and on at the main breaker for a few minutes.
- Bateriová záloha: The unit includes memory back-up. While not user-serviceable, prolonged power outages may eventually deplete the internal battery. If settings are lost after a power outage, reprogram the unit.
CAUTION: Always disconnect power before performing any maintenance inside the enclosure.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný. | Jednotka není napájena. | Check main breaker. Ensure wiring connections are secure. |
| Unit does not turn ON/OFF at programmed times. | Incorrect programming; Time/date incorrect. | Verify programmed ON/OFF times. Check and correct current time/date. Ensure unit is not in manual override mode. |
| Equipment (pump, light) does not respond. | Faulty equipment; Wiring issue; Overload. | Check the equipment directly. Inspect wiring for loose connections. Check for tripped circuit breakers on the equipment's circuit. |
| Nastavení se po výpadku napájení ztratítage. | Internal memory backup battery depleted. | Reprogram the unit. The internal battery is designed for long life but can eventually deplete. |
If troubleshooting steps do not resolve the issue, contact Intermatic customer support or a qualified electrician.
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | P1353ME |
| Výrobce | Intermatic |
| Vstupní objemtage | 120V nebo 208-240V |
| Obvody | 3 timed circuits |
| Kompatibilita čerpadla | Single- and two-speed pumps up to 3 HP |
| ON/OFF Events | 3 per circuit per day |
| Ochranné funkce | Freeze and Heater Protection |
| Zobrazit | Čtení LCD |
| Hmotnost položky | 1.55 libry |
| Rozměry produktu | 1 x 1 x 1 palce |
| Osvědčení | CSA |
Informace o záruce
The Intermatic P1353ME is covered by a manufacturer's warranty. According to the product specifications, the warranty description is "Replace product". For specific terms, conditions, and duration of the warranty, please refer to the official warranty statement provided with your product or contact Intermatic customer support.
Uschovejte si doklad o koupi pro záruční reklamaci.
Podpora a kontaktní informace
For technical assistance, product inquiries, or warranty claims, please contact Intermatic customer support:
- Výrobce: Intermatic
- Webmísto: www.intermatic.com (Please note: This is a general placeholder, actual support link may vary. Refer to product packaging or official website for precise contact details.)
- Oficiální uživatelská příručka (PDF): Stáhnout PDF
When contacting support, please have your product model number (P1353ME) and purchase date available.
