Transformers Universe Deluxe Figure Acid Storm Instruction Manual

1. Úvod

The Transformers Universe Deluxe Figure Acid Storm is a highly intelligent, eager, and dedicated Decepticon air warrior. Known as one of "The Rainmakers," Acid Storm possesses Hyperion3 blasters capable of seeding natural clouds with a highly destructive form of acid rain. This figure transforms between a formidable robot mode and a sleek fighter jet mode, offering dynamic play and display options.

Image: Transformers Universe Deluxe Figure Acid Storm in Robot Mode.

2. Bezpečnostní informace

• Nebezpečí udušení: Malé díly. Není určeno pro děti do 3 let.
• Chraňte před otevřeným ohněm nebo extrémními teplotami.
• Avoid excessive force during transformation to prevent damage to the figure.
• U mladších dětí se doporučuje dohled dospělé osoby.

3. Součásti

Your Transformers Universe Deluxe Figure Acid Storm package includes:

• Acid Storm Figure (Robot Mode)
• 2 Launching Missiles (accessories)
• Double Hyperion3 Blasters (accessories)

Image: Back of packaging detailing figure components and modes.

4. Transformation

Acid Storm transforms between Robot Mode and Fighter Jet Mode. Follow these steps carefully.

4.1. Robot Mode to Fighter Jet Mode

1. Remove all accessories (missiles, blasters) from the figure.
2. Složte robotovi ruce do předloktí.
3. Otočte pas o 180 stupňů.
4. Collapse the chest panel down to form the nosecone of the jet.
5. Fold the robot's legs together, aligning them to form the rear fuselage of the jet.
6. Rotate the wings from the back of the robot to align with the jet mode. Ensure the Decepticon insignias are facing upwards.
7. Adjust the tail fins to their jet mode position.
8. Attach the launching missiles to the designated ports under the wings.
9. Ensure all panels are securely tabbed into place for a compact jet form.

4.2. Fighter Jet Mode to Robot Mode

1. Remove all accessories (missiles, blasters) from the jet.
2. Untab the fuselage sections and separate the legs.
3. Rotate the legs into their robot mode orientation.
4. Unfold the nosecone section to reveal the robot's chest and head.
5. Otočte pas o 180 stupňů, abyste směřovali dopředu.
6. Rotate the wings and tail fins to position them on the robot's back.
7. Extend the robot's arms and unfold the hands.
8. Attach the Double Hyperion3 Blasters to the robot's hands.
9. Ensure all parts are locked into their robot mode positions.

5. Provozní funkce

• Launching Missiles: Insert the two launching missiles into the designated ports on the jet's wings. Press the small button near the missile to launch.
• Double Hyperion3 Blasters: These blasters can be held by the figure in robot mode. They can also be stored on the jet mode by attaching them to the underside ports.
• Flip Down Landing Gear: In fighter jet mode, locate the small landing gear components on the underside of the jet. Flip them down for ground display or up for flight mode.

6. Údržba

• Čištění: Wipe the figure with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Skladování: Figurku skladujte na chladném a suchém místě mimo dosah přímého slunečního záření, abyste zabránili změně barvy nebo degradaci materiálu.
• Péče o klouby: If joints become loose, apply a small amount of clear nail polish to the joint and allow it to dry completely to restore tightness.

7. Řešení problémů

• Parts not aligning during transformation: Ensure all previous steps are completed correctly and that no parts are obstructing the movement. Refer to the transformation steps.
• Nevhodné příslušenství: Zkontrolujte orientaci příslušenství a portu. Nevkládejte příslušenství na místo násilím.
• Volné klouby: Refer to the "Joint Care" section under Maintenance.

8. Specifikace

9. Záruka a podpora

For warranty information or product support, please contact Hasbro customer service directly. Refer to the packaging for specific contact details or visit the official Hasbro webmísto.

Online zdroje: For additional information and community discussions, visit Transformers.com.