1. Konec produktuview
The Chicago Pneumatic CP857 is a heavy-duty 7-inch (180mm) air angle grinder designed for general maintenance applications. This tool offers efficient metal removal capabilities and high durability, making it suitable for various industrial tasks.
Its robust construction and ergonomic design contribute to comfortable and reliable performance in demanding environments.
2. Bezpečnostní informace
UPOZORNĚNÍ: Tento výrobek vás může vystavit chemikáliím včetně olova, které je ve státě Kalifornie známo, že způsobuje rakovinu a vrozené vady nebo jiné poškození reprodukce. Pro více informací přejděte na www.P65Warnings.ca.gov.
Always adhere to general safety guidelines when operating pneumatic tools. Failure to do so may result in serious injury or property damage.
- Ochrana očí: Always wear ANSI-approved safety goggles or a face shield.
- Ochrana sluchu: Use earplugs or earmuffs to protect against noise levels.
- Ochrana rukou: Wear appropriate gloves to protect hands from sparks and debris.
- Ochrana dýchacích cest: Use a respirator in dusty environments.
- Pracovní oblast: Ensure the work area is clean, well-lit, and free of obstructions. Keep bystanders away.
- Stav nástroje: Inspect the tool, air hose, and grinding wheel for damage before each use. Do not operate damaged equipment.
- Přívod vzduchu: Ensure the air supply is clean, dry, and at the correct pressure.
- Proper Guard: Always use the wheel guard provided with the tool.
3. Vlastnosti produktu
- Výkonný a efektivní: Equipped with a 1.26 HP (940 W) motor, providing high efficiency and rapid metal removal.
- Vysoká rychlost: Achieves a free speed of 7,500 RPM.
- Wheel Capacity: Supports a maximum wheel capacity of 7 inches (180 mm).
- Ergonomický design: Features an aluminum alloy housing for a rugged yet lightweight construction.
- Trvanlivost: Helical bevel gearing in the angle head ensures extended tool life and smooth, low-vibration operation.
- Všestranné aplikace: Suitable for cleaning, deburring, blending, and smoothing tasks.
4. Pokyny k nastavení
4.1 Připojení přívodu vzduchu
- Ensure your air compressor can provide the required air pressure and volume (6 CFM average air consumption, 24 CFM free speed air consumption).
- Connect a 3/8-inch minimum diameter air hose to the tool's 3/8-inch NPTF air inlet.
- Install an in-line air filter/lubricator as close to the tool as possible to ensure clean, lubricated air.
- Set the air pressure at the regulator to the recommended operating pressure, typically around 90 PSI (6.2 bar), or as specified for your grinding wheel.
4.2 Instalace brusného kotouče
- Disconnect the tool from the air supply before installing or changing any accessories.
- Ensure the grinding wheel is rated for at least 7,500 RPM and is compatible with a 7-inch diameter and 5/8-11 spindle thread.
- Position the wheel guard correctly to deflect sparks and debris away from the operator.
- Mount the grinding wheel onto the spindle, ensuring it is seated properly. Use the provided wrench to securely tighten the retaining nut. Do not overtighten.
- Verify that the wheel rotates freely and is not obstructed by the guard or other components.
5. Návod k obsluze
5.1 Obecná obsluha
- Ensure all safety precautions are in place (PPE, clear work area).
- Připojte nářadí k přívodu vzduchu.
- Hold the grinder firmly with both hands, utilizing the removable side handle for increased maneuverability and control.
- Start the grinder before making contact with the workpiece.
- Apply light, even pressure to the workpiece. Allow the tool's speed and the abrasive action of the wheel to do the work. Avoid excessive force, which can damage the wheel or tool.
- Move the grinder smoothly across the surface to achieve an even finish.
- For tasks such as weld preparation, rust removal, deburring, and blending of steel, cast iron, and aluminum, use appropriate grinding wheels.
- When finished, lift the grinder from the workpiece before releasinstiskněte spoušť.
- Disconnect the air supply after use.
6. Údržba
Regular maintenance ensures optimal performance and extends the lifespan of your CP857 air angle grinder.
- Mazání: If an in-line lubricator is not used, add a few drops of pneumatic tool oil into the air inlet before and after each use.
- Čištění: Keep the tool clean and free of debris. Periodically blow out the air inlet and exhaust ports with compressed air.
- Inspekce: Regularly inspect the grinding wheel for wear, cracks, or damage. Replace worn or damaged wheels immediately. Check the wheel guard for proper positioning and integrity.
- Vzduchová hadice: Inspect the air hose for cuts, kinks, or leaks. Replace damaged hoses.
- Spojovací materiál: Ujistěte se, že všechny šrouby a upevňovací prvky jsou pevně utažené.
7. Řešení problémů
7.1 Běžné problémy
- Loss of Power or Slow Speed:
- Check air pressure at the tool. Ensure it is at the recommended 90 PSI.
- Inspect air hose for kinks, leaks, or insufficient diameter.
- Verify the air compressor can deliver adequate CFM.
- Check for blockages in the air inlet or exhaust.
- Ensure proper lubrication.
- Nadměrné vibrace:
- Inspect the grinding wheel for damage, imbalance, or improper installation. Replace if necessary.
- Check for loose components on the tool.
- Úniky vzduchu:
- Utáhněte všechny vzduchové přípojky.
- Inspect the air hose for damage.
If problems persist after attempting these troubleshooting steps, contact Chicago Pneumatic customer support or an authorized service center.
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Chicago Pneumatic |
| Číslo modelu | CP857 |
| Zdroj napájení | Pneumatic-powered |
| Výkon motoru | 1.26 HP (940 W) |
| Maximální rychlost otáčení | 7500 ot./min |
| Velikost kola | 7palcový (180 mm) |
| Závit vřetena | 5/8-11 |
| Průměrná spotřeba vzduchu | 6 CFM (11.3 l/s) |
| Free Speed Air Consumption | 24 CFM (11.3 l/s) |
| Přívod vzduchu | 3/8-Inch NPTF |
| Minimum Hose Size | 3/8 palce |
| Materiál | Hliník |
| Rozměry produktu (D x Š) | 13.15" × 7" (334 mm × 178 mm) |
| Hmotnost položky | 6.25 lb (2.83 kg) |
| Hladina akustického tlaku | 102 dB(A) |
| Hladina akustického výkonu | 113 dB(A) |
| Zahrnuté komponenty | Air Angle Die Grinder; Wrench Spanner |
| UPC | 015451016708, 015451410339 |
9. Informace o záruce
The Chicago Pneumatic CP857 Air Angle Grinder comes with a 2letá omezená záruka. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and claim procedures, please refer to the official warranty documentation included with your product or contact Chicago Pneumatic customer service.
10. Zákaznická podpora
For technical assistance, spare parts, or service inquiries regarding your Chicago Pneumatic CP857 Air Angle Grinder, please contact Chicago Pneumatic customer support. You can find contact information on the official Chicago Pneumatic webna webu nebo prostřednictvím autorizovaného prodejce.
Online zdroje: Visit the official Chicago Pneumatic website for product manuals, FAQs, and service center locations.
