Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your Rugged Ridge Heavy Duty Steering Box Brace, Model 18021.02. Designed for 1976-1986 Jeep CJ7 and CJ8 models equipped with power steering, this brace is engineered to enhance steering stability by holding the steering box firmly in place under extreme stress. Please read all instructions carefully before beginning installation.
Image: The Rugged Ridge Heavy Duty Steering Box Brace, featuring a black powder-coated bar with a clamp on one end and a mounting bracket on the other.
Bezpečnostní informace
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Always wear appropriate personal protective equipment, such as safety glasses and gloves, during installation. Ensure the vehicle is securely supported on jack stands before working underneath. Disconnect the battery before performing any electrical work. Follow all local safety regulations and guidelines.
Specifikace produktu
| Atribut | Detail |
|---|---|
| Číslo modelu | 18021.02 |
| Název produktu | Heavy Duty Steering Box Brace |
| Značka | Robustní hřeben |
| Materiál | Ocel |
| Typ dokončení | Černá prášková barva |
| Rozměry produktu (D x Š x V) | 23 x 5 x 1 palce |
| Hmotnost položky | 3 libry |
| Kompatibilita | 1976-1986 Jeep CJ7 and CJ8 with power steering |
| UPC | 804314076856 |
| Země původu | Tchaj-wan |
Instalace (Nastavení)
This section outlines the general steps for installing the Rugged Ridge Steering Box Brace. Specific vehicle configurations may vary, and professional installation is recommended if you are unsure about any steps.
Požadované nástroje:
- Standardní sada klíčů
- Sada zásuvek
- Momentový klíč
- Jack a jack stojany
- Ochranné brýle a rukavice
- WD-40 or similar lubricant (optional, for stubborn bolts)
Kroky instalace:
- Zaparkujte vozidlo na rovném a stabilním povrchu a zatáhněte parkovací brzdu.
- Safely lift the front of the vehicle using a jack and support it securely with jack stands.
- Locate the steering box on the driver's side frame rail.
- Identify the mounting points for the steering box brace. One end of the brace will attach to the frame, often utilizing an existing shackle hanger bolt, and the other end will clamp around the steering gearbox.
- Loosely install the frame-side bolt(s) for the brace. Some users report needing a coarse-thread 7/16" x 14 bolt for the rear hole on the passenger side, as the supplied bolt may be fine-thread.
- Umístěte třamp end of the brace around the steering gearbox.
- Install the bolts, washers, and nuts for the clamp end, ensuring a snug fit around the gearbox.
- Once all bolts are in place, progressively tighten all fasteners to the manufacturer's recommended torque specifications. Ensure the brace is securely holding the steering box without causing undue stress or misalignment.
- Bezpečně spusťte vozidlo dolů.
- Test the steering for proper operation and ensure no new noises or vibrations are present.
Note: Some installations may require minor adjustments or modifications due to vehicle age or previous modifications.
Operace
The Rugged Ridge Steering Box Brace is a passive component designed to reinforce the steering box mounting. Once properly installed, it operates continuously to reduce flex and movement of the steering box, contributing to improved steering feel and reduced "steering wander" or "death wobble" common in older Jeep CJ models.
No active user operation is required after installation. The brace works in conjunction with your existing power steering system to provide a more stable and responsive steering experience.
Údržba
Regular inspection of the steering box brace is recommended to ensure continued performance and safety.
Plán údržby:
- Every 3 months or 3,000 miles (whichever comes first):
- Visually inspect the brace for any signs of damage, cracks, or corrosion.
- Check all mounting bolts for tightness. Re-torque if necessary according to the vehicle's service manual or general automotive torque specifications for the bolt size.
- Ensure the brace is not interfering with any other vehicle components.
- After any off-road excursion:
- Perform a quick visual inspection for impacts or damage from debris.
Clean the brace periodically with mild soap and water to remove dirt and grime, especially if exposed to harsh conditions like road salt or mud. The black powder-coated finish is designed for durability but can be compromised by severe impacts or prolonged exposure to corrosive elements without cleaning.
Odstraňování problémů
This section addresses common issues that may arise after installing the steering box brace.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Steering still feels loose or has excessive play. |
|
|
| New noises or vibrations after installation. |
|
|
| Difficulty installing bolts or achieving proper fit. |
|
|
If issues persist, contact Rugged Ridge customer support or consult a qualified automotive technician.
Oficiální video produktu
Video: An official video from Rugged Ridge showcasing the spirit of adventure associated with Jeep vehicles and the range of accessories they offer. This video highlights the lifestyle aspect of Jeep ownership and the role of Rugged Ridge products in enhancing that experience.
Záruka a podpora
Rugged Ridge products are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information included with your product packaging or visit the official Rugged Ridge webmísto.
For technical assistance, installation questions, or warranty claims, please contact Rugged Ridge customer support:
- Webmísto: www.RuggedRidge.com
- Telefon: Viz webstránky s aktuálními kontaktními čísly.
- E-mail: Viz webstránky pro kontaktní e-mail.
Při kontaktování podpory mějte prosím po ruce číslo modelu produktu (18021.02) a informace o nákupu.
