Aurora 806-B

Uživatelská příručka k plnicímu peru Aurora 806-B 88 LG

Model: 806-B

Zavedení

Welcome to the world of fine writing with your new Aurora 806-B 88 LG Fountain Pen. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your fountain pen, ensuring a long-lasting and enjoyable writing experience. Please read through these instructions carefully before first use.

Konec produktuview

Aurora 806-B 88 LG Fountain Pen with Chrome Cap and Broad Nib

Image: The Aurora 806-B 88 LG Fountain Pen, featuring a black barrel, a silver-colored chrome cap, and a broad nib. The pen is shown uncapped, revealing the intricate design of the nib.

Nastavení

Before using your fountain pen for the first time, it needs to be filled with ink. Your Aurora 806-B 88 LG Fountain Pen typically uses a piston-filling mechanism or can accommodate ink cartridges/converters, depending on the specific model variant. This manual assumes a piston-filling mechanism.

Ink Filling Procedure (Piston Filler)

  1. Prepare the Pen: Remove the cap and unscrew the barrel from the section to expose the piston knob.
  2. Submerge Nib: Dip the entire nib and a portion of the section into a bottle of fountain pen ink. Ensure the ink level covers the breather hole on the nib.
  3. Draw Ink: Slowly turn the piston knob counter-clockwise until the piston is fully extended (all air is expelled). Then, slowly turn the piston knob clockwise to draw ink into the reservoir. Avoid drawing ink too quickly, as this can create air bubbles.
  4. Vytlačte vzduch (volitelné): Turn the piston knob slightly counter-clockwise to expel a few drops of ink back into the bottle. This helps to remove any trapped air bubbles and ensures a full fill.
  5. Clean Excess Ink: Carefully wipe any excess ink from the nib and section with a soft, lint-free cloth or tissue.
  6. Znovu sestavit: Screw the barrel back onto the section. Your pen is now ready for use.

Provozní

Using your Aurora fountain pen is a delightful experience. Proper handling ensures smooth ink flow and comfortable writing.

Writing Posture and Grip

  • Hold the pen comfortably between your thumb and index finger, resting it on your middle finger.
  • Maintain a relaxed grip; excessive pressure is not required with a fountain pen.
  • Angle the nib to the paper at approximately 45 degrees for optimal ink flow and line variation.
  • Allow the ink to flow naturally; do not press down hard as you would with a ballpoint pen.

Capping and Uncapping

  • To uncap, gently pull the cap straight off. Avoid twisting if it's a snap-on cap.
  • To cap, align the cap and push it firmly until it clicks or seats securely. This prevents the nib from drying out.

Údržba

Regular cleaning and proper storage are crucial for the longevity and performance of your fountain pen.

Rutinní úklid

  1. Empty Ink: If the pen contains ink, expel it back into the bottle or flush it out.
  2. Opláchněte vodou: Fill a glass with clean, cool water. Submerge the nib and section, then repeatedly draw water into the pen and expel it until the water runs clear.
  3. Schnout: Gently blot the nib and feed with a lint-free cloth. Allow the pen to air dry completely, nib down, for several hours or overnight before refilling or storing.

Poznámka: For best results, clean your pen when changing ink colors or if it will be unused for an extended period (more than a week).

Skladování

  • Always store your fountain pen capped to prevent the nib from drying.
  • Store horizontally or nib-up to prevent ink from pooling in the cap.
  • Keep away from direct sunlight, extreme temperatures, and high humidity.

Odstraňování problémů

Most common issues with fountain pens can be resolved with simple steps.

ProblémMožná příčinaŘešení
Ink flow is inconsistent or stopsDried ink in nib/feed, low ink level, wrong ink type, or paper fibers clogging.Clean the pen thoroughly. Check ink level. Ensure you are using fountain pen ink. Try different paper.
Pen skips or scratchesNib misalignment, dried ink, or writing angle.Clean the nib. Adjust writing angle. If nib is misaligned, seek professional repair.
Ink leaks from nib or sectionOverfilling, loose components, or temperature changes.Do not overfill. Ensure all parts are securely tightened. Avoid extreme temperature fluctuations.

Specifikace

  • Model: Aurora 806-B 88 LG Fountain Pen
  • Číslo dílu výrobce: a03806
  • Značka: Aurora
  • Barva: Černý
  • Materiál: Chrome (Cap)
  • Typ bodu: Broad Nib
  • Barva inkoustu: Černá (výchozí)
  • Uzavření: Zaklapávací víčko
  • Hmotnost položky: Approximately 3.01 pounds (Note: This weight seems unusually high for a pen and may refer to shipping weight or packaging.)

Záruka a podpora

Aurora stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Aurora website. For technical support or service inquiries, please contact Aurora customer service through their official channels.

Více informací a kontaktní údaje naleznete na Aurora Brand Store on Amazon.

Související dokumenty - 806-B

Předview Aurora 918 EHD-CA a SRD-CA: Inhalační extraktové cartridge s léčebným konopím
Prozkoumejte inhalační extraktové cartridge z léčebného konopí Aurora 918 EHD-CA (Sativa) a 918 SRD-CA (Indica). Zjistěte více o extrakci CO2, obsahu THC/CBD, dávkování a použití.
Předview Uživatelská příručka k skartovačce papíru Aurora AU120MB - Obsluha, údržba a řešení problémů
Komplexní uživatelská příručka pro skartovačku Aurora AU120MB, která zahrnuje informace o instalaci, provozu, údržbě, řešení problémů a záruce. Naučte se, jak bezpečně a efektivně používat skartovačku Aurora.
Předview Plán interakce úředníka veřejné bezpečnosti a záchranářů v Auroře: Toyota Sienna Hybrid
Tato příručka poskytuje úředníkům veřejné bezpečnosti a záchranným složkám základní informace o interakci s autonomními hybridními vozidly Toyota Sienna Hybrid společnosti Aurora, včetně identifikace, provozních postupů, reakce na mimořádné události a odtahu.
Předview LED svítidlo Aurora AU-R6CWSBF: Instalační průvodce a specifikace
Tento dokument obsahuje pokyny k instalaci LED svítidla Aurora AU-R6CWSBF. Podrobně popisuje bezpečnostní opatření, zapojení a návod k instalaci.tagVýběr teploty e a barev a informace o ekologické likvidaci. Pro optimální výkon a bezpečnost zajistěte správnou instalaci kvalifikovaným elektrikářem.
Předview Průvodce řešením problémů se skartovačkou Aurora AU870MA: Zasekávání papíru a přehřátí
Průvodce odstraňováním problémů s 8listovým skartovačem papíru Aurora AU870MA s mikrořezem, který zahrnuje řešení pro zasekávání papíru, chybné podávání, rychlé podávání, přeplněné koše a přehřívání.
Předview Návod k instalaci a záruka pro vysoce výkonné LED světlomety řady Aurora EN-FLC
Instalační příručka a informace o záruce pro vysoce výkonné LED světlomety Aurora řady EN-FLC (modely EN-FLC30, EN-FLC50, EN-FLC80, EN-FLC100, EN-FLC150, EN-FLC200). Podrobnosti zahrnují elektrické specifikace, bezpečnost, montáž, zapojení, krytí IP65, třídu I a 5letou záruku. Zahrnuje shodu s předpisy OEEZ (Elektronická a elektrotechnická zařízení).