Konec produktuview
The Oster Professional 103 Stim-U-Lax Massager is a heavy-duty, single-speed device designed for professional and personal use. It provides a refreshing and energizing massage, ideal for use after cutting services or for general muscle relaxation.
- Made of 100% ball bearing construction for durability.
- Traditional frame design with a special contour to fit the hand and reduce fatigue during use.
- Features a chrome housing and a comfortable rubber hand pad.
- Heavy-duty, single speed operation.
- Operates on 120 volts, 60 Hz, AC.
Důležité bezpečnostní informace
Before operating this device, please read and understand all safety instructions. Improper use can result in injury or damage to the product.
Právní prohlášení: Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition. This product is intended for massage purposes only.
- Vždy po použití a před čištěním odpojte masážní přístroj od elektrické zásuvky.
- Nepoužívejte při koupání nebo ve sprše.
- Neumisťujte ani neskladujte masážní přístroj na místa, kde by mohl spadnout nebo být vtažen do vany či umyvadla.
- Nevkládejte do vody nebo jiné kapaliny ani je nepouštějte do vody.
- Nikdy nepoužívejte tento spotřebič, pokud má poškozený kabel nebo zástrčku, pokud nefunguje správně, pokud spadl nebo je poškozen nebo spadl do vody.
- Udržujte kabel mimo horké povrchy.
- Never use on swollen or inflamed areas or skin eruptions.
- Consult your doctor before using this massager if you have any medical conditions.
Nastavení
The Oster Professional 103 Stim-U-Lax Massager is designed for ease of use. Follow these steps for initial setup:
- Rozbalit: Carefully remove the massager from its packaging. Retain packaging for future storage or transport.
- Kontrolovat: Check the device for any visible damage. Ensure the power cord and plug are intact.
- Umístění: The massager is designed to be held in hand. Ensure a comfortable grip before operation.
- Připojení napájení: Plug the massager into a standard 120-volt, 60 Hz AC electrical outlet.
Návod k obsluze
The Stim-U-Lax Massager provides a powerful, invigorating massage. Its lightweight and ergonomic contoured design helps reduce hand fatigue during extended use.
- Držet: Securely hold the massager by placing your hand through the straps, ensuring a firm and comfortable grip.
- Aktivovat: Locate the power switch, typically a toggle switch, and flip it to the "ON" position. The massager will begin to vibrate.
- Použít: Gently apply the vibrating surface of the massager to the desired area of the body. Move the massager in slow, circular motions or back and forth, depending on the area and desired effect.
- Trvání: Use for short periods, typically 5-15 minutes per area, or as recommended by a professional. Avoid prolonged use on a single spot.
- Deaktivovat: Po dokončení přepněte vypínač do polohy „VYPNUTO“.
- Odpojit: Unplug the massager from the electrical outlet.
This massager is particularly effective for providing a refreshing, energizing massage following any cutting service, or for general muscle relaxation.
Údržba
Proper maintenance ensures the longevity and optimal performance of your Oster Professional 103 Stim-U-Lax Massager.
- Čištění: Před čištěním masážní přístroj vždy odpojte ze zásuvky. Vnější povrchy otřete měkkým hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani neponořujte jednotku do vody.
- Skladování: Store the massager in a cool, dry place, away from direct sunlight and moisture. Coil the power cord loosely to prevent damage.
- Inspekce: Periodically inspect the power cord and plug for any signs of wear or damage. If damage is found, discontinue use and contact customer support.
Odstraňování problémů
If you encounter issues with your massager, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Masážní přístroj se nezapne. | Not plugged in; power switch is off; power outlet is not working; internal fault. | Ensure the massager is securely plugged into a live electrical outlet. Check the power switch is in the "ON" position. Test the outlet with another appliance. If the issue persists, contact customer support. |
| Slabé vibrace. | Nízký objemtage; internal component issue. | Ensure the massager is connected to a stable power source. Avoid using with extension cords that may cause voltage drop. If the problem continues, contact customer support. |
| Neobvyklý zvuk nebo zápach. | Vnitřní porucha. | Immediately turn off and unplug the massager. Do not attempt to repair. Contact customer support for assistance. |
Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 76103 |
| Zdroj napájení | 120 Volts, 60 Hz, AC |
| Konstrukce | 100% Ball Bearing |
| Materiál bydlení | Chrome |
| Hand Pad Material | Pryž |
| Rozměry produktu | 1 x 1 x 1 palce |
| Hmotnost položky | 2.6 libry |
| Výrobce | Oster |
| První dostupný termín | 2. ledna 2004 |
Vizuály produktu



Oficiální videa produktů
There are currently no official product videos from the manufacturer available for embedding in this manual.
Záruka a podpora
For warranty information, technical support, or to inquire about replacement parts, please contact Oster customer service. Keep your purchase receipt and product model number (76103) handy when contacting support.
Contact details can typically be found on the product packaging or the official Oster webmísto.





