AMS F5848

AMS Radio-Controlled Wall Clock 5848

Model: F5848

1. Úvod

Thank you for choosing the AMS Radio-Controlled Wall Clock Model F5848. This modern silver wall clock is designed for precision timekeeping, automatically synchronizing with a radio time signal. Its elegant design, featuring a mineral glass and a large display, makes it a perfect addition to any room, especially a study. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your clock.

AMS Radio-Controlled Wall Clock 5848, front view

Obrázek 1.1: Přední view of the AMS Radio-Controlled Wall Clock 5848. This image shows the round silver and white clock face with black hour, minute, and second hands. The numbers 1 through 12 are clearly visible, with the AMS logo and a radio signal icon below the 12 o'clock position. The outer ring is silver-toned, and the inner face is white.

2. Bezpečnostní informace

Please read all safety instructions carefully before using the clock. Keep this manual for future reference.

  • Bezpečnost baterie:
    • Use only the specified type and size of battery.
    • Insert batteries with correct polarity (+ and -). Incorrect insertion may cause damage.
    • Nekombinujte staré a nové baterie ani různé typy baterií.
    • Vybité baterie ihned vyjměte, abyste zabránili vytečení a poškození.
    • If the clock is not used for a long period, remove the batteries to prevent leakage.
    • Udržujte baterie mimo dosah dětí.
  • Obecná opatření:
    • Nevystavujte hodiny extrémním teplotám, přímému slunečnímu záření ani vysoké vlhkosti.
    • Zabraňte silným vibracím nebo nárazům.
    • Do not disassemble or modify the clock. This will void the warranty.
    • Clean the clock only with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Obsah balení

Po otevření zkontrolujte obsah balení. Pokud některé položky chybí nebo jsou poškozené, obraťte se na prodejce.

  • AMS Radio-Controlled Wall Clock (Model F5848)
  • Uživatelská příručka (tento dokument)
  • (Battery may or may not be included depending on retailer/region)

4. Nastavení

4.1. Instalace baterie

  1. Najděte přihrádku na baterie na zadní straně hodin.
  2. Otevřete kryt bateriového prostoru.
  3. Insert one AA (or specified type) battery, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. Bezpečně zavřete kryt bateriového prostoru.

4.2. Initial Time Synchronization (Radio-Controlled)

Your AMS clock is radio-controlled and will automatically set itself to the correct time once batteries are installed and a signal is received. This process may take a few minutes to several hours depending on your location and signal strength.

  1. After inserting the battery, the clock hands will typically move to the 12 o'clock position and then stop. This indicates it is searching for the radio signal.
  2. Place the clock in an area with good radio signal reception. Avoid placing it near large metal objects, electronic devices, or in basements, which can interfere with the signal. A window-facing wall is often ideal.
  3. Once the signal is received, the clock will automatically adjust to the correct time. This usually happens within a few minutes, but can take longer.
  4. If the clock does not set itself after 24 hours, try relocating it to a different position or refer to the Troubleshooting section.

4.3. Montáž hodin

The clock is designed for wall mounting.

  1. Choose a suitable location on a wall, ensuring it is sturdy enough to hold the clock's weight (approx. 1.6 kg).
  2. Use an appropriate wall anchor and screw (not included) for your wall type.
  3. Zavěste hodiny bezpečně pomocí závěsného otvoru na zadní straně.

5. Provoz

5.1. Zobrazení času

The AMS Radio-Controlled Wall Clock displays time using traditional hour, minute, and second hands. The large display ensures easy readability from a distance.

5.2. Příjem rádiového signálu

The clock continuously monitors the radio time signal to maintain accurate time. In areas with poor reception, the clock may occasionally lose synchronization. It will attempt to re-synchronize automatically. If the signal is consistently weak, you may need to relocate the clock.

5.3. Manual Time Setting (If Applicable)

Most radio-controlled clocks do not have a manual time setting function, as they rely solely on the radio signal. If your clock has a small button or dial on the back (often labeled "M.SET" or similar), it may allow for manual adjustment in areas without signal. Refer to the specific markings on your clock's movement if automatic synchronization fails persistently.

6. Údržba

6.1. Čištění

To clean the clock, gently wipe the surface with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the finish or the mineral glass.

6.2. Výměna baterie

When the clock hands stop moving or the time becomes inaccurate, it is likely time to replace the battery. Follow the battery installation steps in Section 4.1. Always replace with a fresh, high-quality battery of the specified type.

6.3. Skladování

If you plan to store the clock for an extended period, remove the battery to prevent potential leakage and damage to the movement.

7. Řešení problémů

ProblémMožná příčinaŘešení
Clock hands do not move or stop.Dead or low battery. Incorrect battery polarity.Replace battery with a fresh one, ensuring correct polarity.
Clock shows incorrect time or fails to synchronize.Špatný příjem rádiového signálu. Rušení od jiné elektroniky.Relocate the clock to an area with better signal (e.g., near a window, away from electronics). Allow up to 24 hours for synchronization.
Clock loses time or gains time intermittently.Weak battery. Intermittent signal loss.Replace battery. Check for consistent signal reception.
Hands are misaligned (e.g., not pointing to 12 after reset).Internal mechanism issue or strong magnetic interference.Remove battery for 1 minute, then reinsert. Allow clock to re-synchronize. If problem persists, contact support.

8. Specifikace

FunkceDetail
ZnačkaAMS
Číslo modeluF5848
BarvaStříbro
Rozměry produktu (D x Š x V)31 x 4 x 213 cm (Note: 213cm height seems incorrect for a wall clock, likely a data entry error. Assuming 31x31cm for a round clock based on feature bullets and image.)
Actual Product Dimensions (Diameter x Depth): 31 x 4 cm (approx.)
MateriálGlass (Mineral Glass), Aluminum (Brushed Aluminum finish on ring)
Hmotnost položky1.6 kg
Typ zobrazeníAnalogový
StylModerní
Speciální funkceLarge display, Radio-controlled
Zdroj napájeníNapájení z baterie
Typ pokojeStudy Room (Suggested)
TvarKolo

Poznámka: Specifikace produktu se mohou změnit bez předchozího upozornění.

9. Záruka a podpora

9.1. Informace o záruce

Specific warranty terms and conditions for the AMS Radio-Controlled Wall Clock Model F5848 are provided by the manufacturer, AMS. Please refer to any warranty card included with your product or visit the official AMS webPodrobné informace o záruce naleznete na webových stránkách. Uschovejte si doklad o koupi pro případ reklamace.

9.2. Zákaznická podpora

Pro technickou pomoc, řešení problémů nad rámec této příručky nebo dotazy týkající se záruky kontaktujte:

  • Your retailer where the product was purchased.
  • The official AMS customer support channels (refer to the AMS webweb s kontaktními údaji).

When contacting support, please have your model number (F5848) and purchase date ready.

Související dokumenty - F5848

Předview AMS 5898 / 5893 Radio-Controlled Clock User Manual
Detailed instructions for setting up and operating the AMS 5898 and AMS 5893 radio-controlled clocks, including time setting, alarm functions, temperature display, and maintenance.
Předview Návod k obsluze nástěnných hodin AMS
Návod k obsluze nástěnných hodin AMS, zahrnující instalaci baterií, výměnu a obecné použití v několika jazycích.
Předview Manuál k zkušební sadě adaptérové ​​desky ams AS5600L
Tato příručka poskytuje komplexní informace o adaptérové ​​desce ams AS5600L-WL_EK_AB, včetně obsahu sady, popisu desky, montážních pokynů, podrobností o zapojení pinů, provozu v režimu I2C, schémat zapojení hardwaru, rozvržení desky plošných spojů a informací o objednání.
Předview Uživatelská příručka k 14bitovému rotačnímu snímači polohy ams AS5048
Tato uživatelská příručka poskytuje podrobné informace o snímači polohy ams AS5048, 14bitovém rotačním snímači polohy s digitálním úhlem a PWM výstupem. Zahrnuje adaptérovou desku AS5048, montáž, zapojení pinů, operační obvody (SPI, Daisy Chain) a kódování firmwaru, např.ampsoubory a hardwarová schémata. Nezbytné pro inženýry, kteří tento senzor integrují do svých systémů.
Předview Manuál k vyhodnocovací sadě adaptérové ​​desky ams AS5048
Tato příručka podrobně popisuje adaptérovou desku ams AS5048 (AS5048-EK-AB), vyhodnocovací sadu pro magnetický snímač polohy AS5048. Zahrnuje hardware, provozní režimy (SPI, I2C), software, např.amples, and contact information for ams AG.
Předview Návod k obsluze hodin AMS a průvodce výměnou baterií
Pokyny k obsluze a výměně baterie v hodinách AMS s vícejazyčným vedením.