1. Úvod
The Monacor DM-70/SW is a high-quality dynamic microphone designed for general public address (PA) applications. Engineered with German precision, this microphone offers reliable performance and clear audio capture, making it suitable for various vocal and instrumental uses. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your DM-70/SW microphone.
2. Obsah balení
Pečlivě zkontrolujte balení, abyste se ujistili, že jsou přítomny všechny položky:
- 1 x Monacor DM-70/SW Dynamic Microphone

Obrázek 2.1: Přední strana view of the Monacor DM-70/SW microphone packaging, displaying the model number and brand logo.

Obrázek 2.2: Strana view of the Monacor DM-70/SW microphone packaging.
3. Vlastnosti
The Monacor DM-70/SW Dynamic Microphone boasts the following key features:
- Dynamic microphone type for robust performance.
- Cardioid polar pattern microphone cartridge, designed to pick up sound primarily from the front, reducing pickup from the sides and rear.
- Odolný plast casing for lightweight handling and general use.
- Equipped with an ON/OFF switch for convenient control.
- Suitable for a wide range of general public address (PA) applications.
4. Nastavení
Follow these steps to set up your Monacor DM-70/SW microphone:
- Vybalte mikrofon: Opatrně vyjměte mikrofon z obalu.
- Připojte kabel: The DM-70/SW microphone comes with an integrated cable terminating in a 6.35mm (1/4-inch) jack connector. Insert this jack firmly into a compatible input on your audio equipment, such as an amplifier, mixer, or PA system. Ensure the connection is secure to prevent signal loss or noise.
- Umístěte mikrofon: Place the microphone on a stand or hold it comfortably for your intended use. For optimal sound, position the microphone directly towards the sound source.

Obrázek 4.1: Přední strana view of the Monacor DM-70/SW microphone, showing the integrated cable and 6.35mm jack connector.
5. Provoz
Operating the Monacor DM-70/SW is straightforward:
- Zapnutí: Locate the ON/OFF slide switch on the body of the microphone. Slide the switch to the 'ON' position to activate the microphone.
- Upravit hlasitost: Adjust the input volume on your connected audio equipment (amplifier, mixer) to a suitable level. Start with a low volume and gradually increase it to avoid sudden loud sounds.
- Vypnout: When you are finished using the microphone, slide the ON/OFF switch to the 'OFF' position. This conserves power and prevents any unintended audio pickup.

Obrázek 5.1: Úhlové view of the Monacor DM-70/SW microphone, highlighting the ON/OFF slide switch on the body.
6. Údržba
Proper maintenance will help extend the life of your microphone:
- Čištění: Wipe the microphone's plastic casing with a soft, dry, lint-free cloth. Do not use liquid cleaners, solvents, or abrasive materials, as these can damage the finish or internal components.
- Skladování: Store the microphone in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Zacházení: Avoid dropping the microphone or subjecting it to strong impacts, as this can damage the internal capsule or external casing.
7. Řešení problémů
If you encounter issues with your Monacor DM-70/SW microphone, refer to the following common problems and solutions:
Žádný zvukový výstup
- Zkontrolujte spínač ON/OFF: Ujistěte se, že je vypínač mikrofonu v poloze „ON“ (zapnuto).
- Ověřte připojení: Make sure the 6.35mm jack is fully and securely inserted into the input of your audio device.
- Check Audio Device: Potvrďte, že vaše amplifier, mixer, or PA system is powered on and its volume levels are appropriately set. Test with another audio source if possible to rule out issues with the audio device.
Poor Sound Quality / Excessive Noise
- Pozice mikrofonu: Ensure the microphone is positioned correctly relative to the sound source. For a cardioid microphone, speaking directly into the front is crucial.
- Environmentální hluk: Reduce background noise in the recording or performance environment.
- Integrita kabelu: While the cable is integrated, ensure there are no visible kinks or damage. If possible, test with a different microphone to see if the issue persists, which might indicate a problem with the audio device's input.
- Vstupní zisk: Adjust the input gain or sensitivity on your audio device. Too high a gain can introduce distortion, while too low can result in a weak signal.
8. Specifikace
Detailed technical specifications for the Monacor DM-70/SW Dynamic Microphone:
| Specifikace | Hodnota |
|---|---|
| Název modelu | DM-70/SW (231700) |
| Značka | Monacor |
| Tvarový faktor mikrofonu | Ruční |
| Polární vzor | Jednosměrný (kardioidní) |
| Technologie připojení | XLR (internal wiring), 6.35 mm Jack (connector) |
| Typ konektoru | Zásuvka 6.35 mm |
| Frekvenční rozsah | 100 Hz - 10 kHz |
| Frekvenční odezva | 10000 Hz |
| Audio Citlivost | 54 dB |
| Odstup signálu od šumu | 85 dB |
| Úroveň hluku | 50 dB |
| Impedance | 600 Ohmy |
| Počet kanálů | 1 |
| Materiál | Plast |
| Barva | Černý |
| Rozměry položky (D x Š x V) | 8.07 x 2.09 x 2.09 palce (20.5 x 5.3 x 5.3 cm) |
| Hmotnost položky | 4.6 unce (cca 130 gramů) |
| Zdroj napájení | Corded Electric (passive microphone) |
| Doporučená použití | Veřejná adresa |
| Kompatibilní zařízení | Amplifier, Mixer, PA System |
9. Záruka a podpora
Warranty information for the Monacor DM-70/SW Dynamic Microphone is not specified in this manual. Please refer to your purchase documentation or contact Monacor customer support for details regarding warranty terms and conditions.
For technical support, product inquiries, or further assistance, please visit the official Monacor website or contact your local Monacor distributor. Contact information can typically be found on the Monacor webmístě nebo na obalu produktu.





