Konec produktuview
The Danfoss Thermostatic Head Type RA/VL2960 is a renovation head designed for use with RA/V 34 mm valve bodies. It provides manual temperature control for heating systems, featuring a frost protection function and the ability to limit or lock temperature settings. This product is a direct replacement for older Danfoss RA/V thermostatic heads produced before 1986, ensuring compatibility and ease of upgrade for existing installations.
The package includes one Danfoss thermostatic head Type RA/VL2960.
Obrázek 1: Přední strana view of the Danfoss Thermostatic Head RA/VL2960, showing the white body with numbered temperature settings and the Danfoss logo.
Nastavení a instalace
The Danfoss RA/VL2960 thermostatic head is designed for straightforward installation on compatible RA/V valve bodies with a 34 mm neck inner diameter. No special tools are typically required beyond a flat-head screwdriver for the clamping ring connection.
Kroky instalace:
- Příprava: Ensure the heating system is depressurized if replacing an old valve or if there is any risk of water leakage. For head replacement only, this may not be necessary, but always exercise caution.
- Demontáž staré hlavy (pokud je to relevantní): If replacing an existing thermostatic head, loosen the clamping ring or connection mechanism that secures it to the valve body. Carefully remove the old head.
- Set New Head: Before mounting, set the new Danfoss RA/VL2960 thermostatic head to its highest setting (typically '5' or 'MAX') to ensure the valve pin is fully retracted. This facilitates easier installation.
- Umístění a připevnění: Place the new thermostatic head onto the valve body, aligning it correctly. The head is designed to fit securely over the valve's neck.
- Zabezpečené připojení: Utáhněte třamping ring connection firmly using a flat-head screwdriver. Ensure the head is securely fastened and does not wobble. Do not overtighten.
- Ověřte provoz: Once installed, turn the thermostatic head through its settings to confirm smooth operation and proper engagement with the valve pin.
Figure 2: Compatibility diagram illustrating how the new Danfoss RA/V head replaces older thermostatic heads produced before 1986, highlighting the 34mm valve diameter.
Návod k obsluze
The Danfoss RA/VL2960 thermostatic head allows for manual control of room temperature by regulating the flow of hot water through the radiator. The head features numbered settings, typically from '*' (frost protection) to '5' (maximum heat).
Ovládání teploty:
- Nastavení teploty: Rotate the head to the desired setting. Higher numbers correspond to higher room temperatures.
- Frost Protection (*): Setting the head to the '*' symbol activates the frost protection function. This setting ensures the room temperature does not fall below approximately 6-8°C (43-46°F), preventing pipes from freezing.
- Limiting/Locking Settings: The head may have mechanisms to limit the maximum or minimum temperature settings, or to lock it at a specific setting. Refer to the markings on the head for specific instructions on how to engage these features, if present. This is useful for preventing accidental changes or maintaining a consistent temperature.
Figure 3: Close-up of the thermostatic head showing the numbered dial for temperature adjustment and the Danfoss branding.
Figure 4: The Danfoss thermostatic head installed on a radiator, demonstrating its integration into a home heating system.
Údržba
The Danfoss RA/VL2960 thermostatic head requires minimal maintenance to ensure optimal performance and longevity.
- Čištění: Periodically wipe the exterior of the thermostatic head with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu.
- Sezónní kontrola: Before the heating season begins, it is advisable to turn the thermostatic head through its full range of settings a few times. This helps to prevent the valve pin from sticking due to prolonged inactivity.
- Cirkulace vzduchu: Ensure that the thermostatic head is not obstructed by curtains, furniture, or other objects, as this can interfere with its ability to accurately sense room temperature and regulate heat.
Odstraňování problémů
If you experience issues with your Danfoss RA/VL2960 thermostatic head, consider the following common solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Radiator remains cold or only partially heats up. |
|
|
| V místnosti je příliš horko i přes nízké nastavení. |
|
|
| Head feels loose or wobbly. | Clamping ring not sufficiently tightened. | Utáhněte třamping ring connection with a flat-head screwdriver. |
If these steps do not resolve the issue, it may indicate a problem with the valve body itself or the heating system, and professional assistance may be required.
Specifikace
| Značka | Danfoss |
| Název modelu | 013G2960 |
| Rozměry produktu | 2.48"H x 2.13"Š x 3.31"V |
| Typ ovladače | Kroužek |
| Barva | Bílá (RAL 9016) |
| Typ řízení teploty | Manuál |
| Zahrnuté komponenty | Thermostatic head for RA/VL 2950 body (diameter: 34 mm) |
| Zdroj napájení | Manuál |
| Hmotnost položky | 150 gramů (5.3 unce) |
| svtage | 230 Volts (Note: This refers to the system voltage, not the head itself which is manual) |
| Typ montáže | Wall Mount (on radiator valve) |
| Styl | Renovation head 2960 RA/V 34 mm |
| UPC | 793518448210, 791429257891 |
| Výrobce | Conmetall |
| Jsou vyžadovány baterie? | Žádný |
Záruka a podpora
Specific warranty details for the Danfoss RA/VL2960 thermostatic head are typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for warranty claims.
For technical support, installation queries, or further assistance, please contact Danfoss customer service or visit the official Danfoss website. You can find contact information on the Danfoss webna webu nebo prostřednictvím místního distributora.
Danfoss Official Webmísto: www.danfoss.com
