Zavedení
Děkuji za nákupasing the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Obsah balení
- Lexon On/Off 3 Position LCD Alarm Clock (LR98-B)
- Baterie AAA x 2
- Uživatelská příručka (tento dokument)
Konec produktuview
The Lexon LR98-B is a unique digital alarm clock designed for intuitive use. Its innovative "on/off" mechanism allows you to activate or deactivate the alarm simply by rotating the clock to one of its three positions. The clear LCD display shows the time, and an EL backlight provides visibility in low-light conditions.
This image displays the Lexon On/Off 3 Position LCD Alarm Clock, model LR98-B, in its black finish. The clock is shown in an angled position, with the digital display clearly visible, indicating '12:30 PM'. The unique 'on/off' design is evident in its angled structure, where rotating the clock changes its operational state.
Nastavení
1. Instalace baterie
- Najděte krytku přihrádky na baterie na zadní straně budíku.
- Kryt sejměte jeho posunutím nebo jemným vypáčením.
- Vložte dvě (2) baterie typu AAA a dbejte na správnou polaritu (+ a -) uvedenou uvnitř přihrádky.
- Bezpečně nasaďte kryt prostoru pro baterie.
2. Počáteční zapnutí
Once batteries are installed, the LCD display should activate. If not, check battery placement or replace with fresh batteries.
Návod k obsluze
The Lexon LR98-B features a unique "on/off" function controlled by its physical orientation. The clock has buttons on the back for setting time and alarm.
Nastavení času
- Locate the time setting buttons on the back of the clock (usually labeled "SET" or "TIME" and "+" / "-").
- Press and hold the "SET" or "TIME" button until the hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the hour. Pay attention to the AM/PM indicator if present.
- Press the "SET" or "TIME" button again to move to the minute setting.
- Use the "+" and "-" buttons to adjust the minutes.
- Press "SET" or "TIME" one last time to confirm and exit time setting mode.
Nastavení alarmu
- Locate the alarm setting buttons on the back of the clock (usually labeled "ALARM" and "+" / "-").
- Press and hold the "ALARM" button until the alarm hour digits begin to flash.
- Use the "+" and "-" buttons to adjust the alarm hour.
- Press the "ALARM" button again to move to the alarm minute setting.
- Use the "+" and "-" buttons to adjust the alarm minutes.
- Press "ALARM" one last time to confirm and exit alarm setting mode.
Using the On/Off Function
The Lexon LR98-B features a unique physical on/off switch. The clock has three positions:
- Alarm ON Position: When the clock is oriented in a specific way (e.g., with "ON" facing upwards or a designated side), the alarm function is active. A small indicator (e.g., an alarm icon) may appear on the display.
- Alarm OFF Position: When the clock is rotated to another specific orientation (e.g., with "OFF" facing upwards or a different designated side), the alarm function is deactivated. The alarm indicator will disappear from the display.
- Time Display Position: A third position might exist for simply displaying the time without alarm functionality being explicitly on or off, or it might be a neutral position. Refer to the markings on your specific device.
To activate or deactivate the alarm, simply rotate the clock to the desired position. The display will visually confirm the alarm status.
EL podsvícení
To illuminate the display in dark conditions, press the "EL" button located on the back of the clock. The backlight will typically stay on for approximately 3 seconds.
Hourly Time Signal (Chime)
The clock is equipped with an hourly time signal function. To activate or deactivate this feature, refer to the specific button or combination of buttons on the back of your device, often labeled "CHIME" or integrated with the "SET" button. Consult the markings on your clock for precise control.
Údržba
- Čištění: Hodiny otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo displej.
- Výměna baterie: Replace batteries when the display dims or the clock functions become erratic. Always replace both batteries simultaneously with new AAA batteries.
- Skladování: Pokud hodiny skladujete delší dobu, vyjměte baterie, abyste zabránili vytečení.
- Prostředí: Avoid exposing the clock to extreme temperatures, direct sunlight, high humidity, or strong magnetic fields.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný nebo tmavý. | Slabé nebo vybité baterie; nesprávná instalace baterií. | Replace batteries with new AAA batteries; ensure correct polarity. |
| Alarm se nespustí. | Alarm is not set; clock is in "OFF" position; alarm volume is too low (if adjustable). | Ensure alarm time is set correctly; rotate clock to "ON" position; check for volume controls if applicable. |
| Čas je nesprávný. | Time was not set correctly; power interruption (if not battery-backed). | Reset the time according to the "Setting the Time" instructions. |
Specifikace
- Model: LR98-B (Manufacturer Model Number: 2910200 LR98-B)
- Značka: Lexon
- Typ displeje: Digitální LCD
- Zdroj napájení: 2 x AAA baterie
- Materiál: ABS (akrylonitrilbutadienstyren)
- Rozměry (Š x H x V): 5.3 x 1.4 x 3.1 palce (13.5 x 3.5 x 8 cm)
- Hmotnost: 0.13 kg (4.6 unce)
- Speciální vlastnosti: On/Off 3 Position Function, EL Backlight, Hourly Časový signál
- Typ montáže: Stolní deska
- Země původu: Čína
Záruka a podpora
Lexon products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your purchase or visit the official Lexon webstránky. Uschovejte si prosím doklad o koupi pro případné reklamace.
For further assistance, you may contact Lexon customer support through their official channels.
