Steinel IS 180-2

Uživatelská příručka k infračervenému detektoru pohybu Steinel IS 180-2

Model: IS 180-2

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Steinel IS 180-2 Infrared Motion Detector. Designed for both indoor and outdoor applications, this device offers reliable motion detection and automatic light control. Please read these instructions carefully before beginning installation or operation to ensure safe and efficient use.

2. Bezpečnostní pokyny

Varování: Incorrect installation can lead to electric shock, fire, or other hazards. Always ensure that installation is performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.

  • Disconnect power at the main circuit breaker before installation or maintenance.
  • Neotevírejte výrobek casing unless specifically instructed. There are no user-serviceable parts inside.
  • Ensure the product is securely mounted to prevent it from falling.
  • Udržujte děti mimo dosah elektrických zařízení.

3. Konec produktuview

The Steinel IS 180-2 is an elegant infrared motion detector combining advanced sensor technology with a modern design. It is equipped with two highly sensitive infrared detectors to provide reliable, uninterrupted all-round protection.

Přední view of the Steinel IS 180-2 Infrared Motion Detector in silver.

Obrázek 3.1: Přední strana view of the Steinel IS 180-2 Infrared Motion Detector, showcasing its sleek silver finish and integrated sensor lens.

Steinel IS 180-2 product packaging and contents, including the sensor, manual, screws, and corner mount.

Figure 3.2: The Steinel IS 180-2 package contents, including the motion detector, quick start guide, mounting screws, and a corner wall mount accessory.

Graphic summarizing key features of the Steinel IS 180-2: 350W max LED, 180 degree infrared sensor, 12m max range, IP54 rating, plastic-free packaging, 2-2000 lux twilight, 5 sec - 15 min time setting, and a QR code for AR view.

Figure 3.3: Key features of the IS 180-2, including its 180° infrared sensor, maximum 12m range, IP54 weather protection, and adjustable time and twilight settings. For an augmented reality view of the product, scan the QR code or visit tento odkaz.

Zadní view of the Steinel IS 180-2 motion detector, showing mounting holes and wiring access.

Obrázek 3.4: Zadní view of the motion detector, illustrating the mounting points and the area for electrical connections.

4. Instalace a montáž

The Steinel IS 180-2 is designed for wall mounting and includes a corner wall mount for flexible installation. Ensure the mounting surface is stable and suitable for the device's weight.

4.1 Místo montáže

Choose a location that provides the desired detection coverage. The sensor offers a 180° detection angle and a maximum range of 12 meters. Avoid mounting near heat sources or objects that might cause false triggers (e.g., moving branches, direct sunlight).

Steinel IS 180-2 motion detector mounted on a white exterior wall.

Figure 4.1: The IS 180-2 mounted on an exterior wall, demonstrating a typical installation scenario.

4.2 Detekční zóna

The detection zone can be adjusted to suit specific requirements. The sensor provides coverage for areas as large as 200 m².

Diagram illustrating the 180-degree detection area of the motion sensor from an aerial perspective, covering a wide arc around a building.

Obrázek 4.2: Režijní náklady view of the 180° detection zone, showing how the sensor covers a broad area in front of a building.

Diagram showing detection patterns for wall and corner mounting, indicating a 180-degree, 12-meter range.

Figure 4.3: Illustration of detection patterns for both flat wall and corner mounting, highlighting the 180° coverage and 12m range.

Diagram znázorňující stranu view of the detection range, illustrating how the sensor detects movement at different distances and heights.

Obrázek 4.4: Strana view diagram detailing the sensor's detection range, showing its ability to detect movement across various distances and vertical angles.

5. Návod k obsluze

The Steinel IS 180-2 operates by detecting infrared radiation (heat) emitted by moving objects. When motion is detected within its adjustable range and the ambient light level falls below the set twilight threshold, the connected light source will activate for the set duration.

6. Úpravy

The motion detector features control dials for fine-tuning its operation. These dials are typically located behind the sensor lens or on the underside of the unit.

Detailní záběr view of the control dials on the Steinel IS 180-2 for adjusting time and twilight settings.

Figure 6.1: Control dials for adjusting the time and twilight threshold settings of the motion detector.

  • Nastavení času: This dial adjusts how long the light remains on after motion is detected. It can be infinitely varied from approximately 5 seconds to 15 minutes.
  • Twilight Threshold: This dial sets the ambient light level at which the sensor becomes active. It can be adjusted from approximately 2 lux (dark) to 2000 lux (daylight).
  • Nastavení dosahu: The reach of the motion sensor can be set to a maximum of 12 meters or reduced to 5 meters by turning the multi-lens. Shrouds are also provided to limit the detection zone and match it to specific situations, preventing unwanted triggers.

7. Údržba

The Steinel IS 180-2 motion detector requires minimal maintenance. To ensure optimal performance:

  • Pravidelně čistěte čočku snímače měkkým hadříkemamp cloth to remove dust or dirt that may obstruct detection. Do not use abrasive cleaners or solvents.
  • Ensure the area around the sensor remains clear of obstructions that could block its field of view or cause false triggers.
  • No internal maintenance or lubrication is required.

8. Řešení problémů

If your Steinel IS 180-2 is not functioning as expected, consult the following table for common issues and solutions:

ProblémMožná příčinaŘešení
Světlo svítí nepřetržitě.Continuous motion in detection zone; Time setting too long; Wiring fault.Remove obstructions; Adjust time setting; Check wiring.
Light does not switch on.No power; Twilight setting too high; Sensor lens obstructed; Faulty bulb.Check power supply; Adjust twilight setting; Clean lens; Replace bulb.
Falešné spouštěče.Heat sources (e.g., vents, animals); Detection zone too wide.Relocate sensor; Adjust reach using shrouds or multi-lens.

9. Specifikace

Technical drawing with dimensions of the Steinel IS 180-2 motion detector.

Figure 9.1: Technical drawing showing the dimensions of the Steinel IS 180-2 in millimeters.

FunkceDetail
ZnačkaSteinel
ModelIS 180-2
Zdroj napájeníElektrický kabel
svtage230 voltů
Max. Přepínací kapacita1000 Watts (Max. 350 W LED)
Detekční úhel180°
Max. Rozsah12 metrů
Soumrak2 – 2000 luxů
Nastavení času5 sekund - 15 minut
Typ montážeDržák na zeď
Hodnocení ochranyIP54
Hmotnost položky170 gramů (přibližně 6 unce)
Rozměry produktu4.72 x 2.99 x 2.2 palce (přibližně 120 x 77 x 55 mm)

10. Záruka a podpora

The Steinel IS 180-2 Infrared Motion Detector comes with a 3-year manufacturer's warranty. For warranty claims or technical support, please contact Steinel customer service or visit their official webmísto.

Další informace naleznete na adrese: www.steinel.de/garantie

Související dokumenty - IS 180-2

Předview Instalační manuál infračerveného pohybového senzoru STEINEL IS 2180 ECO
Instalační a uživatelská příručka pro infračervený pohybový senzor STEINEL IS 2180 ECO. Podrobné informace o funkcích, technických specifikacích, instalaci a řešení problémů pro spolehlivé automatické ovládání osvětlení.
Předview STEINEL IS 2180-2 Infrarot-Bewegungsmelder: Montageanleitung und technische Informationen
Umfassende Montageanleitung für den STEINEL IS 2180-2 Infrarot-Bewegungsmelder. Enthält technische Daten, Installationsschritte, Funktionsbeschreibungen, Fehlerbehebung und Garantieinformationen. Das Dokument ist in mehreren Sprachen verfügbar, mit Fokus auf Deutsch.
Předview Stručný návod k obsluze Steinel NightmatIQ a NightmatIQ Plus | Soumrakové senzory
Stručný návod k obsluze soumrakových senzorů Steinel NightmatIQ a NightmatIQ Plus. Seznamte se s instalací, technickými specifikacemi a funkcemi pro inteligentní řízení osvětlení.
Předview Infračervený stropní detektor pohybu STEINEL IS 2360-3 ECO | Specifikace a zapojení
Podrobné informace o infračerveném stropním detektoru pohybu STEINEL IS 2360-3 ECO, včetně jeho funkcí, technických specifikací, detekční zóny a schémat zapojení pro instalaci a provoz.
Předview Instalační manuál infračerveného pohybového senzoru STEINEL IS 2180-2
Komplexní návod k instalaci a obsluze infračerveného pohybového senzoru STEINEL IS 2180-2 s nastavitelným dosahem, časem a citlivostí na světlo pro spolehlivé ovládání osvětlení.
Předview Průvodce senzory STEINEL: Rychlá cesta k správnému senzoru pro vaši aplikaci
Objevte optimální senzorová a osvětlovací řešení od společnosti STEINEL pro každý prostor. Tato příručka podrobně popisuje různé senzorové technologie (PIR, HF, ultrazvukové, optické) a jejich použití ve vnitřním i venkovním prostředí a pomůže vám najít ideální senzor pro každou situaci.