Steinel NightMatic 3000 Twilight Switch

1. Konec produktuview

The Steinel NightMatic 3000 Vario is a microprocessor-controlled twilight switch designed to automate outdoor lighting. It is ideal for illuminating building facades, grounds, gardens, and other outdoor areas during the night. This device intelligently manages your lighting, ensuring energy efficiency and convenience.

Mezi klíčové vlastnosti patří:

• Automatické osvětlení: Automatically switches connected lamps on in the evening when the set twilight threshold is reached and off again at dawn.
• Vario Night Economy Mode: Allows programming a specific duration during the night when lighting is not desired or necessary, automatically turning off the light and reactivating it in the morning. This feature contributes to energy savings.
• Adjustable Twilight Threshold: The light sensitivity can be individually set to suit specific environmental conditions.
• Self-Compensating Light Function: Ensures reliable operation by preventing interference from nearby external light sources.

2. Bezpečnostní pokyny

Před instalací a provozem si pečlivě přečtěte tyto bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Installation must be performed by a qualified electrician in accordance with national wiring regulations and local electrical codes.
• Ensure the power supply is disconnected at the main circuit breaker before commencing any installation or maintenance work.
• The device operates at 240 Volts. Handle with extreme care.
• Zařízení neotevírejte ani neupravujte. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• Protect the device from moisture, dust, and extreme temperatures. It is designed for outdoor use but should be installed in a location protected from direct heavy rain if possible.
• Uchovávejte obalové materiály mimo dosah dětí.

3. Obsah balení

Ověřte, zda jsou v balení přítomny všechny komponenty:

• Steinel NightMatic 3000 Twilight Switch unit
• Montážní šrouby a hmoždinky
• Návod k použití (tento dokument)

4. Nastavení a instalace

Proper installation is crucial for the optimal performance of your NightMatic 3000. Follow these steps carefully:

1. Vyberte umístění: Select a mounting location where the twilight switch can accurately detect ambient light. Avoid areas directly illuminated by artificial light sources (e.g., streetlights, other lamps) that could interfere with its operation. The sensor should have an unobstructed view z nebe.
2. Příprava na montáž:
   

   Obrázek 4.1: Přední strana view of the Steinel NightMatic 3000 Twilight Switch. This image shows the compact black housing with the sensor visible on the front.
   

   Figure 4.2: The NightMatic 3000 mounted on a wall, demonstrating its discreet profile. The device is shown attached to a light-colored wall, highlighting its compact design.

   Mark the drilling points on the wall using the device as a template. Drill holes and insert the provided wall plugs.
3. Elektrické připojení:
   • DŮLEŽITÉ: Ensure the main power supply is OFF before proceeding.
   • Connect the electrical wires to the terminal block inside the device. The NightMatic 3000 uses a screw terminal type for connections.
   • Connect the phase (L), neutral (N), and switched phase (L') wires according to the wiring diagram provided inside the device cover.
   • Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.
4. Montáž zařízení: Secure the NightMatic 3000 to the wall using the provided screws. Ensure it is firmly attached.
5. Obnovit napájení: Jakmile je instalace dokončena a všechna připojení jsou bezpečná, obnovte napájení hlavním jističem.

5. Návod k obsluze

The NightMatic 3000 is designed for automatic operation. Here's how to configure its settings:

Figure 5.1: Illustration of the NightMatic 3000's automatic lighting functionality. It depicts light turning on when dark, an eco-mode period, and light turning off when bright.

5.1. Setting the Twilight Threshold

The twilight threshold determines the ambient light level at which the device will switch the connected lights on or off. This can be adjusted to your preference:

• Locate the adjustment button/dial on the device.
• Press the button or rotate the dial to increase or decrease the sensitivity. A higher sensitivity means the light will turn on earlier in dimming conditions, and a lower sensitivity means it will wait for darker conditions.
• Test the setting by observing the light behavior at dusk and dawn.

5.2. Vario Night Economy Mode

This intelligent function allows you to save energy by programming a period during the night when the lights are not needed:

• Identify the rotary knob for the Vario economy mode.
• Rotate the knob to set the desired duration for the economy period. During this period, the connected lights will automatically switch off, even if it's dark.
• The lights will automatically reactivate in the morning before dawn, ensuring illumination when needed.

6. Údržba

The NightMatic 3000 requires minimal maintenance to ensure long-term performance:

• Čištění: Periodically wipe the sensor lens and the device housing with a soft, damp cloth to remove dust or dirt. Do not use abrasive cleaners or solvents.
• Inspekce: Annually inspect the wiring connections for any signs of wear or corrosion. Ensure the device is securely mounted.
• Žádné díly opravitelné uživatelem: Do not attempt to open the device for internal cleaning or repair. Refer to qualified personnel for any issues beyond basic cleaning.

7. Řešení problémů

If you encounter issues with your NightMatic 3000, refer to the following table:

8. Specifikace

9. Záruka a podpora

Steinel products are manufactured to high quality standards. This product comes with a 1-year availability for spare parts.

For technical support, warranty claims, or further assistance, please visit the official Steinel website or contact their customer service department. Retain your proof of purchase for warranty purposes.