1. Úvod
This manual provides essential information for the safe and effective installation, operation, and maintenance of your VDO 360 006 Gauge Pressure Sender. Please read these instructions carefully and completely before attempting any installation or use. Retain this manual for future reference.
2. Konec produktuview
The VDO 360 006 is a robust and reliable gauge pressure sender designed for accurate pressure measurement in various applications, particularly in automotive and industrial settings. This component features a 10mmx1.0mm thread for secure and precise connection to a pressure port, ensuring consistent performance and compatibility with VDO pressure gauges. It converts mechanical pressure into an electrical signal, allowing for real-time pressure monitoring.
This image displays the VDO 360 006 Gauge Pressure Sender. It is a cylindrical metal unit with a threaded base for connection to a pressure port. On the top, there are two electrical terminals with knurled black caps, designed for wiring to a compatible gauge and potentially an indicator light.
3. Co je v krabici
- 1x VDO 360 006 Gauge Pressure Sender (10mmx1.0mm)
4. Specifikace
| Funkce | Detail |
|---|---|
| Rozměry produktu | 7.5 x 5 x 1.75 palce |
| Číslo modelu položky | 360 |
| Datum první dostupnosti | 9. srpna 2010 |
| Výrobce | VDO |
| ASIN | B000NBAL9G |
| Značka | VDO |
| Materiál | Kov |
| Hmotnost položky | 0.25 libry |
| UPC | 754059004686 |
5. Nastavení a instalace
Proper installation is crucial for the accurate and safe operation of the pressure sender. If you are unsure about any step, consult a qualified technician.
5.1 Bezpečnostní opatření
- Ensure the engine or system is cool and depressurized before beginning installation.
- Odpojte baterii vozidla, abyste předešli elektrickému zkratu.
- Používejte vhodné osobní ochranné prostředky (OOP), jako jsou rukavice a ochrana očí.
5.2 kroky instalace
- Určete místo montáže: Locate the appropriate pressure port on your engine or system. Ensure it matches the sender's 10mmx1.0mm thread.
- Připravte vlákna: Apply a suitable thread sealant (e.g., PTFE tape or liquid thread sealant) to the sender's threads to ensure a leak-free seal. Avoid getting sealant into the sensor opening.
- Install Sender: Carefully thread the pressure sender into the port by hand to avoid cross-threading. Once hand-tight, use a wrench to tighten it securely. Do not overtighten, as this can damage the sender or the port.
- Elektrické připojení: Connect the appropriate wiring from your pressure gauge to the terminals on the sender. Typically, one terminal connects to the gauge signal input, and the other (if present, often marked 'WK' for warning contact) connects to an indicator light. Refer to your gauge's wiring diagram for specific connections.
- Bezpečné zapojení: Ensure all electrical connections are tight and insulated to prevent shorts or corrosion. Route wiring away from hot or moving parts.
- Znovu připojte baterii: Jakmile jsou všechna připojení bezpečná, znovu připojte baterii vozidla.
- Testovací systém: Start the engine or activate the system and check for proper gauge operation and any leaks around the sender.
6. Návod k obsluze
The VDO 360 006 Gauge Pressure Sender operates by converting the applied fluid pressure into a variable electrical resistance. This resistance change is then interpreted by a compatible VDO pressure gauge, which displays the pressure reading. When the system is operational, the sender continuously transmits pressure data to the connected gauge.
- Ensure the sender is correctly wired to a compatible VDO pressure gauge.
- Monitor the gauge for expected pressure readings during system operation.
- If equipped with a warning contact, an indicator light will illuminate if pressure drops below a predetermined safe level.
7. Údržba
The VDO 360 006 Pressure Sender is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure its continued accuracy and performance.
- Vizuální kontrola: Periodically inspect the sender and its connections for any signs of physical damage, corrosion, or fluid leaks.
- Elektrické připojení: Ensure all electrical connections remain clean and tight. Loose or corroded connections can lead to inaccurate readings.
- Thread Seal: Check the threaded connection for any signs of leakage. If a leak is detected, the sender may need to be removed, re-sealed, and reinstalled.
- Čištění: Keep the exterior of the sender clean from excessive dirt, oil, or debris. Use a soft cloth and mild cleaner if necessary.
8. Řešení problémů
If you experience issues with your VDO 360 006 Gauge Pressure Sender, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| No pressure reading on gauge |
|
|
| Nepřesné nebo nepravidelné hodnoty |
|
|
| Fluid leak at sender connection |
|
|
| Warning light always on/off (if applicable) |
|
|
9. Záruka a podpora
VDO products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the documentation provided with your purchase or visit the official VDO webmísto.
For technical support, troubleshooting assistance beyond this manual, or warranty inquiries, please contact VDO customer service or your authorized VDO dealer. Contact information can usually be found on the VDO webmísto nebo obal produktu.
Online zdroje: For additional information and product updates, visit the official VDO webmísto: www.vdo-gauges.com
