Vogel's MICROMASTER Wall Mounts for Microwave Ovens

Zavedení

Thank you for choosing Vogel's MICROMASTER Wall Mounts. This product is designed to provide a secure and stable mounting solution for microwave ovens and other compatible appliances, with a maximum weight capacity of 50 kg. Please read this manual carefully before installation and use to ensure proper setup and safe operation.

Bezpečnostní informace

• Přečtěte si všechny pokyny: Ensure you understand all steps before beginning installation.
• Nosnost: Do not exceed the maximum weight capacity of 50 kg. Overloading can lead to product failure and injury.
• Typ stěny: Ensure the wall structure is capable of supporting the combined weight of the mounts and the appliance. Consult a professional if unsure.
• Nástroje: K instalaci používejte vhodné nářadí. Používejte ochranné brýle a rukavice.
• Děti: Uchovávejte malé díly a obalové materiály mimo dosah dětí.
• Údržba: Pravidelně kontrolujte všechny šrouby a spoje, abyste se ujistili, že jsou bezpečně utažené.

Obsah balení

Please verify that all components are present before proceeding with installation. A standard package typically includes:

• 2 x Vogel's MICROMASTER Wall Mount Brackets
• Mounting Hardware (screws, wall plugs - specific types may vary based on region and wall material)
• Návod k použití

If any parts are missing or damaged, please contact your retailer or Vogel's customer support.

Nastavení (instalace)

1. Požadované nástroje

• Tužka
• Měřicí páska
• Vodováha
• Drill with appropriate drill bits (for wood, concrete, or brick)
• Šroubovák (Phillips nebo plochý, v závislosti na typu šroubu)

2. Výběr lokality

Select a sturdy wall location that can safely support the weight of the mounts and your appliance. Ensure there is adequate space around the appliance for ventilation as recommended by its manufacturer. Avoid mounting above heat sources or in areas with excessive moisture.

3. Montážní kroky

1. Změřte a označte: Determine the desired height and width for your appliance. Place one bracket against the wall and mark the drill holes with a pencil. Ensure the marks are level using a spirit level. Repeat for the second bracket, ensuring it is parallel and at the correct distance from the first to support your appliance.
2. Vrtací otvory: Drill holes at the marked positions using the appropriate drill bit for your wall type. Insert wall plugs if necessary.
3. Připevněte držáky: Securely fasten each bracket to the wall using the provided screws. Ensure they are tightened firmly but do not overtighten.
4. Ověřte stabilitu: Gently pull on the installed brackets to confirm they are securely attached to the wall before placing any appliance on them.

Image: Vogel's MICROMASTER Wall Mounts. These L-shaped brackets are designed for secure wall mounting of appliances.

Provoz (použití)

Once the wall mounts are securely installed, carefully place your microwave oven or other compatible appliance onto the brackets. Ensure the appliance is centered and stable on both mounts. Do not slide the appliance forcefully, as this may damage the mounts or the appliance. Always adhere to the appliance manufacturer's guidelines regarding ventilation and placement.

Důležité: Never exceed the maximum weight capacity of 50 kg for these mounts.

Údržba

• Čištění: Clean the mounts with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, která by mohla poškodit povrchovou úpravu.
• Pravidelné kontroly: Regularly inspect the mounts and all fastening points (screws, wall plugs) for any signs of loosening or damage. Tighten any loose screws immediately.
• Poškození: If any part of the mount appears damaged, discontinue use and replace the product.

Odstraňování problémů

• Mounts are not level: Re-measure and adjust the position of the brackets before drilling. Use a spirit level during installation.
• Appliance feels unstable: Ensure all mounting screws are fully tightened. Verify that the wall structure is sound and capable of supporting the load. Re-check the appliance's placement on the mounts.
• Šrouby jsou uvolněné: Tighten all screws. If screws repeatedly loosen, consider using stronger wall plugs or consulting a professional for wall reinforcement.

Specifikace

Informace o záruce

Specific warranty details for the Vogel's MICROMASTER Wall Mounts are not provided in this manual. For information regarding product warranty, please refer to the documentation included with your purchase, contact your retailer, or visit the official Vogel's webmísto.

Zákaznická podpora

If you have any questions, require assistance with installation, or encounter issues with your Vogel's MICROMASTER Wall Mounts, please contact your point of purchase or visit the official Vogel's support channels for further assistance.