Walker 54079 Exhaust Tail Pipe Installation and Maintenance Manual

Konec produktuview

The Walker 54079 Exhaust Tail Pipe is engineered for specific vehicle applications, providing a direct-fit replacement for the original equipment. Constructed from durable aluminized steel, this tail pipe is designed to resist corrosion and ensure long-lasting performance. Its precision-bent design and OE-style routings facilitate a straightforward installation process.

This tail pipe is compatible with the following vehicles:

• Jeep Grand Cherokee z roku 1996
• Jeep Grand Cherokee z roku 1997
• Jeep Grand Cherokee z roku 1998

Always verify compatibility with your specific vehicle's year, make, model, engine, and trim before installation.

Bezpečnostní informace

Always prioritize safety when working on your vehicle. Wear appropriate personal protective equipment (PPE) including safety glasses, gloves, and hearing protection. Ensure the vehicle is securely supported on jack stands or a lift. Allow the exhaust system to cool completely before beginning any work to prevent burns. Work in a well-ventilated area.

Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.

Nastavení a příprava

1. Sbírejte nástroje: You will need basic hand tools such as wrenches, sockets, a ratchet, a penetrating lubricant, and potentially a cutting tool for rusted components.
2. Vehicle Lift: Safely lift and support the vehicle using a hydraulic lift or sturdy jack stands on a level surface. Ensure the vehicle is stable before proceeding.
3. Ochladit: Allow the exhaust system to cool completely to avoid burns.
4. Inspect Existing System: Examine the current tail pipe and surrounding exhaust components for rust, damage, or worn hangers. Note how the existing pipe is routed and connected.
5. Aplikace maziva: Apply penetrating lubricant to all bolts, nuts, and hangers that need to be removed. Allow time for the lubricant to penetrate.

Pokyny k instalaci

The Walker 54079 tail pipe is designed for direct-fit installation. Follow these general steps:

1. Remove Old Tail Pipe:
   • Loosen or cut the clamps connecting the old tail pipe to the muffler or intermediate pipe.
   • Carefully detach the tail pipe from its hangers. You may need a pry tool or specialized hanger removal tool.
   • Remove the old tail pipe from under the vehicle.
2. Příprava na novou instalaci:
   • Clean any rust or debris from the connection point on the muffler or intermediate pipe.
   • Inspect and replace any worn or damaged exhaust hangers or rubber isolators.
3. Install New Tail Pipe:
   • Position the new Walker 54079 tail pipe under the vehicle.
   • Connect the tail pipe to the muffler or intermediate pipe, ensuring a snug fit. Use new exhaust clamps v případě potřeby.
   • Attach the tail pipe to the existing hangers. The OE-style routings and hangers are designed for easy alignment.
   • Ensure the pipe has adequate clearance from the vehicle's chassis, suspension components, and fuel lines.
4. Utáhněte spoje:
   • Once the tail pipe is properly aligned and secured in the hangers, tighten all clamps and connections to specification.
   • Do not overtighten, as this can damage the pipes or clamps.
5. Závěrečná kontrola:
   • Spusťte vozidlo.
   • Start the engine and check for any exhaust leaks. Leaks can often be identified by a hissing sound or by feeling for escaping gases.
   • If leaks are present, re-check connections and tighten as needed.

Obrázek: Přamples of Walker direct-fit exhaust pipes, illustrating various bends and connection points.

Image: Various exhaust hardware and accessories, including clamps and pipe connectors, essential for installation.

Údržba

Regular inspection of your exhaust system can help identify potential issues early and extend its lifespan.

• Vizuální kontrola: Periodically check the tail pipe and other exhaust components for signs of rust, cracks, dents, or loose connections.
• Hanger Check: Ensure all exhaust hangers and rubber isolators are intact and securely holding the system in place. Replace any worn or broken hangers.
• Detekce úniku: Listen for unusual noises (hissing, rattling) that might indicate an exhaust leak or a loose component.
• Čištění: While not strictly necessary, cleaning the exterior of the tail pipe can prevent buildup of road grime and salt, especially in harsh climates.

Odstraňování problémů

Specifikace

• Číslo modelu: 54079
• Materiál: Hliníkovaná ocel (legovaná ocel)
• Inlet (OD): 2.25 inches (as per product title)
• Typ instalace: Bolt-On
• Rozměry produktu: Approximately 58 x 11 x 9 inches (packaging dimensions, actual pipe dimensions may vary)
• Hmotnost položky: Approximately 8 ounces (likely shipping weight, actual pipe weight will be higher)
• Typ servisu vozidla: Auto
• Výrobce: Tenneco (Dynomax, Walker, Thrush)

Image: Diagram illustrating the components of a complete exhaust system, including manifold converters, oxygen sensors, catalytic converters, resonator assemblies, and mufflers.

About Walker Exhaust Systems

Walker has been a leader in exhaust system technology for over a century, committed to manufacturing high-quality parts that meet or exceed original equipment standards. Their focus on precision engineering and consistent compliance ensures reliable performance and durability.

Záruka a podpora

For specific warranty information and technical support regarding your Walker 54079 Exhaust Tail Pipe, please refer to the official Walker webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Výrobce: Tenneco (Dynomax, Walker, Thrush)

Kontakt: Refer to the official Walker webweb s nejaktuálnějšími kontaktními informacemi a zdroji podpory.